(1 in stock)
Homelite VI-944 Chainsaw Vibration Mount Screw NEW 68305 (hm 319)
Throttle handle vibration mount screw fits Homelite chainsaw models: VI 944 and VI 955 chainsaws. Part #: 68305 New old stock part from closed out dealer.
(4 in stock)
Homelite 240 Chainsaw Screw NEW 80870 (hm 318)
Homelite screw fits Homelite 240, 245, 540, and Super EZ chainsaws. Part #: 80870 New old stock part from closed out dealer.
(1 in stock)
Homelite 26LCS Chainsaw Wico Ignition
Wico ignition includes: coil, points, condenser, and stator plate. 72397 +++ WICO X7536 Tested in good working order Fits Homelite 26LCS, 5-30N, 7-29, 8-29 and others
Homelite 26LCS Chainsaw Points Cam
Breaker points cam bushing. 72126 In good used shape Fits Homelite 26 LCS and many others
Homelite 20" Sprocket Tip Chainsaw Bar and Chain for 3/8" Studs
20" .050" gauge hard nose chainsaw bar, with carlton chisel chain. In good used shape Fits many older chainsaws such as Homelite, Remington, Pioneer, and Lombard. With 3/8" bar studs. Homelite 35SL, 330, 350, 360, 400, 410, 450, 460, 540, 550, 650, 700, 800, 825, 850, 900, 922, 923, XL 9...
Homelite 26LCS Chainsaw Clutch Drum
Belt drive clutch drum with bearings. AA-71960 In good used shape Fits Homelite 26 LCS and others
Homelite 7-19 Chainsaw Tillotson HL Carburetor
Tillotson HL4a HL4 a HL 4 4a carb carburetor In good used physical shape, may or may not need fresh diaphragms installed. Fits Homelite Model 17, 7-19, 4-20, 5-20 and others
Homelite Zip Chainsaw Clutch Mechanism
Complete clutch mechanism includes: clutch shoes, carrier, springs. In good used shape Fits Homelite Zip, Wiz 660d 600d and others
Homelite 650, 750 chainsaw starter recoil assembly
Part: starter recoil rewind housing cover assembly complete. Includes: cover with pulley spring and mechanism. Condition: good used/working shape Fits: Homelite 650 & 750
Homelite Super EZ Automatic Chainsaw Complete Original
Homelite Super EZ Auto, Automatic Complete used chainsaw. In super nice original condition. Starts runs, and works. A bit hard to start when cold, but hey it's pretty old. Includes original wrench and plastic carry case.
Homelite 750 Chainsaw Bottom Handle Brace
Bottom handle brace frame. In good used shape Fits Homelite 750 650
Homelite Original 20" Sprocket Tip Chainsaw Bar
Homelite chainsaw guide bar. 20" sprocket nose. 3/8 pitch, .050 gauge, takes a 70dl chain (available here: http://store.chainsawr.com/products/oregon-72lgx-3-8-short-20-chain-70dl) Good used, usable condition Fits many Homelite models: Alpina/Castor A-70, CP-55, CP-56, CP-65, CP-66, ...
Homelite 500 Chainsaw Top Handle
Aluminum tube wrap around top handle. In good used shape Fits Homelite 500
Homelite 500 Chainsaw Complete Clutch Assembly
Complete clutch assembly includes: sprocket drum, bearing, race, mechanism with shoes, springs and carrier, hardware. In good used shape Fits Homelite 500
Homelite 500 Chainsaw Cylinder Cover
Cylinder top cover. 57105 In good used shape. Has one minor crack, as pictured, from a bolt hole to the plug hole that you cannot see when installed. Fits Homelite 500
Homelite 500 Chainsaw Rear Carburetor Cover
Rear carburetor and air filter lower bottom housing. 57121 In good used shape Fits Homelite 500
Homelite 500 Chainsaw Clutch Cover
Clutch and drivecase chain cover. 57122 In good used shape Fits Homelite 500
Homelite 500 Chainsaw ID Tag Plate
Blue model and serial number ID plate. In good used shape For the Homelite 500 model.
Antique Homelite 22" Bar and Chain 1/2" Pitch 3-slot
Homelite 22" Hardnose Track Hardened Bar. 167-063 Bar is in very good shape, Oregon 1/2" pitch chain is 1/2 worn and needs sharpening. Fits old original Homelite models: 26LCS 30MCS 20MC 20LC
Homelite 26LCS Chainsaw Fuel Line Kit
Inner and outer fuel lines with fittings on outer line and fuel filter. New rubber fuel lines and fuel filter. Recycled original line fittings and inner stiffener spring. Fits Homelite 26LCS 26 LCS
Homelite 45cc Chainsaw Air Filter 518049002 NEW (HM-1000)
Felt air filter element. 518049002 NEW Fits many models of Homelite chainsaw 45cc 46cc and others
Homelite 600d Chainsaw Manual Oil Pump
Manual bar oil pump assembly. A74406, A-74406, 71764, 71762, In good used shapes. Fits many models of Homelite chainsaw. 660d 600d 700d 5-20 17 4-20 and many others
Homelite 500 Chainsaw Bar Adjuster Plate Assembly
Bar Clamp and chain bar tensioner adjuster assembly. 555551-B In good used shapes. Fits many models of Homelite chainsaw. 500 660d 600d
19" Homelite Chainsaw bar for Antique Models
Closed back 19" bar for very old homelites. Carlton 50 mounting pattern. Oregon F014, Windsor HO. With 1/2" pitch chain. Bar and chain are in very good used condition. Chain is dull but has 90%+ cutter life remaining. Fits 707G, 770G, 775G, Super Wiz 55, Super Wiz 66, Super Wiz 80, Wiz 55 a...
Homelite 26LCS Chainsaw Air Filter Cover
Air filter element cover end cap. In good used shape Fits Homelite 26 LCS and others
Homelite 410 Chainsaw Fuel Cap
Fuel gas or oil filler cap. A98882, A-98882 In good used shape Fits Homelite 410 540 and Chop Saw DM-54 DM54
Homelite 26LCS Chainsaw Instruction Manual
Instruction book. 22227 In good used original condition Homelite Model 26 LCS
Homelite 5-30N Chainsaw Starter Screen
Starter recoil rewind screen only a74362 In good used shape Fits Homelite 5-30 and 7-29
Homelite 9/16" Scratcher Chainsaw Cutters and Repair Links Kit AA-31246 NEW (HOSE)
Assorted left and right hand side cutters, pre-sets, rivets, and tie straps. Remnants and parts of several AA-31246 kits NEW Fits 9/16" pitch Homelite scratcher style chain found on Models 20MCS 26LCS 30MCS 17 and others.
16" Grey Homelite Chainsaw Bar and Chain USED
16" Original Homelite bar with Homelite chain. 16/40 H1 04 QJ 3/8lp .050 gauge In good used condition, with 2 new professional Stihl chains. Exact item pictured. Fits Little Red XL, Super 2, 240, 192, 200 Classic, VI Super 2, if they are running 3/8lp chain.
16" Black Homelite Chainsaw Bar and Chain USED
16" Original Homelite bar with Homelite chain. 16/40 H1 04 QJ 3/8lp .050 gauge In good used condition, chain is very dull but has lots of tooth left. Exact item pictured. Fits Little Red XL, Super 2, 240, 192, 200 Classic, VI Super 2, if they are running 3/8lp chain.
14" Homelite Chainsaw Bar and Chain USED
14" Original Homelite bar with Homelite chain. 14/385 H1 04 PU 3/8lp .050 gauge In good used condition, chain is somewhat dull but has lots of tooth left. Exact item pictured. Fits Little Red XL, Super 2, 240, 192, 200 Classic, VI Super 2, if they are running 3/8lp chain.
Homelite 5-20 Chainsaw Full Wrap Top Handle
Full wrap around top handle. A-55518, A55518 In good used shape Fits Homelite 5-20 and others.
Homelite 5-20 Chainsaw Wico Magneto Ignition Kit
Wico Bantamag ignition kit includes: coil, condenser, flywheel rotor and breaker points. 55578, 55403, 55399, A-55402 Tested, in good used shape Fits Homelite Model 17 19, 5-20 and others
Homelite 5-20 Chainsaw Ignition Kit
Repco Phelon ignition kit includes: coils, condenser, and breaker points. Tested, in good used shape Fits Homelite Model 17 19, 5-20 and others
Homelite XL-700 Chainsaw Complete Clutch Assembly
Clutch assembly includes: 3 shoe mechanism, shoes, springs, carrier, washers, drum, bearing, race, and 3/8 7-tooth rim sprocket. In good used shape with new rim sprocket installed Fits Homelite XL 700 800 750 850 901 903 921 and others
Homelite Super EZ Chainsaw Hand Guard
Hand guard with mounting hardware. A-70910, A70910 In good used shape Fits Homelite Super EZ Auto, Super EZ Automatic, SEZ-AO, Super EZ, EZ Automatic
Homelite pro 4620c, 46cc chainsaw easy tension clutch cover assembly
Part: toolless ez tensioning, clutch sprocket cover Condition: good used/working shape Fits: Homelite Pro 4620 c, 46cc, 42cc
Homelite 360 Chainsaw Chainbrake Assembly
Chain brake, brake assembly with clutch cover. A94561, A97221A, A04241 In good used shape Fits Homelite 350 360 SL 350SL 360SL
Homelite XL-400 Chainsaw Ignition Coil Assembly
Ignition coil with stator plate, coil, points and condenser In tested, good used shape Fits Homelite XL400, XL-400
Homelite XL Chainsaw Metal Body Case
Cast metal body handle and case housing. 69851 In good used shape Fits little red Homelite XL saws
Homelite Super 2 Chainsaw Metal Starter Recoil Cover and Pulley assembly REBUILT
Part: Starter recoil cover and pulley-metal (early model) Condition: Good used/working shape, rebuilt with new rope, cleaned and oiled Fits: Homelite Super 2, XL
Homelite XL-400 Chainsaw Flywheel Assembly
Wico Prestolite flywheel assembly with starter pawls and springs. In good used shape Fits Homelite XL400
Homelite Timberman 45 Chainsaw Clutch Mechanism
Clutch mechanism rotor carrier, shoes and spring pn 984894-001 Good Used/ Usable Homeliet Timberman 45
Homelite 45cc Timberman Chainsaw Oil Pump
Oil pump assembly with drive gear and lines. In good used shape Fits many models of 38cc 45cc and 46cc homelite
Homelite 360 Chainsaw Hardware Kit
Includes screws, nuts, bolts, small parts etc. pictured In good used shape Fits Homelite 350 360 series and others
Homelite VI Super 2 Chainsaw Hardware Kit
Hardware kit with assorted nuts, bolts, screws, rubber mounts, and small parts pictured. In good used shape Fits Homelite VI Super 2
Homelite VI Super 2 Chainsaw Air Filter Assembly
Air Filter Assembly In good used shape Fits Homelite VI Super 2
Homelite VI Super 2 Chainsaw Body Case
Body case housing. 70559-B In good used shape Fits Homelite VI Super 2
(1 in stock)
Homelite VI Super 2 Chainsaw Top Handle
Top wrap around handle In good used shape Fits Homelite VI Super 2
Homelite VI Super 2 Chainsaw Electronic Piston and Cylinder Set
Top end motor kit includes: cylinder head, piston, ring, wrist pin and clips. In good used shape Fits later model Homelite VI Super 2, Super 2VI, with electronic solid state ignition.
Homelite XL-400 Chainsaw Walbro SDC Carburetor
Walbro SDC 28 carburetor Goog Used/Usable Homelite XL400
Homelite XL-400 Chainsaw Reed Valve Assembly
Reed valve assembly . 4x reed valve 59678-a, Retainer 63269-a, Seat 68185, Spacer 59718 Good Used/ Usable Homelite XL-400
Homelite 360 Chainsaw Walbro HDA 75 Carburetor
Walbro HDA 75 carburetor Good Used condition may or may not need new gasket and diaphragms installed Homelite 360
Homelite cs50 Chainsaw Walbro HDA Carburetor
Part: Walbro HDA 109 Carburetor with grommet Condition: good used, physical shape-may or may not need a car rebuild kit Fits: Homelite CS 50
Homelite C-series Chainsaw Fuel line Kit
Gas line kit includes: inner line, outer line, fitting, and fuel filter with pickup body. In good used shape Fits Homelite C5 C7 C9 C51 C52 C71 C72 C91 C 5 7 9 51 52 7 72 91
Homelite Super EZ Chainsaw Tank Attachment Screws
Set of 3 fuel gas and oil tank attaching screws. 65321A, 65321-A In good used shape Fits Homelite EZ, Super EZ Auto, Super EZ Automatic, SEZ Auto
Homelite Super 2 Chainsaw Oil Strainer
Oil pickup filter A-68593, A68593 In good used shape Fits Homelite Super 2, XL, XL-2, XL2 and others
Homelite Super EZ Auto Chainsaw Shortblock
Short block motor includes: cylinder, piston, crankshaft, case and etc. as pictured In good used shape Fits Homelite Super EZ Automatic with points type ignition.
Homelite Super XL-925 Chainsaw
Nice running Super XL 925 as pictured
(1 in stock)
Homelite XL-400 Chainsaw Starter Assembly
Starter recoil rewind cover assembly. In good used shape Fits Homelite XL400 and others
Homelite 33cc UT10532 Chainsaw Top Handle
Plastic top handle 518244001 In good used shape Fits 33cc Ranger and many others
Homelite DM50 Chop Saw Belt 46068 (HAR-D)
Ribbed v belt 46068, UP06392 new old stock Fits Homelite DM-50 Demo saw
Homelite Chainsaw Large 16" Bar Cover
16" long large size bar cover, works well for longer bars too In excellent condition
(1 in stock)
Homelite 2100 Chainsaw Starter Inner Spring Shield 63566
Inner spring shield 63566 In good used shape. May vary in color. Fits Homelite C-51G, C-71G, C-72, C-91G, Super 1050, 1130G, 2000, 2100, 3100G, XP 1000, 1020, 1100, 1130 XL-700 XL-800
(4 in stock)
Homelite 2100 Chainsaw Starter Spring Shield 65712
Outer spring shield 65712 In good used shape Fits Homelite C-51G, C-71G, C-72, C-91G, Super 1050, 1130G, 2000, 2100, 3100G, XP 1000, 1020, 1100, 1130
Homelite c-72 chainsaw starter housing cover only
Part: starter rewind housing cover a-64178-3a, A641783a, A64178-3a Condition: good used/working shape Fits: homelite c72
Homelite 2100 Chainsaw Starter Spring 64180-A
Starter rewind recoil spring. 64180a In good used shape Fits Homelite C-51G, C-71G, C-72, C-91G, Super 1050, 1130G, 2000, 2100, 3100G, XP 1000, 1020, 1100, 1130
Homelite 410 Chainsaw Starter Pulley
Starter pulley rope spool. A97990, A-97990, 97989 In good used shape Fits 410 540 and others
Homelite XL-76 Chainsaw Manual Oil Pump
Manual oil pump assembly In good used shape Fits Homelite XL-76, XL123, XL-123 and others
Homelite 450 Chainsaw Starter Spring Holder assembly
Recoil rewind spring cover with spring and pawl catch. A-70728-1, A707281, A94885, a-94885 In good used shape Fits Homelite 450, 550 series
homelite xl-123 chainsaw bucking spike
Part: bucking spike dog with hardware part # A 64722, a64722 Condition: in good used shape Fits: Homelite XL 123, VI 123, XL123, XL-101 102 103 113 112
homelite c-51 chainsaw complete starter assembly with housing
Part: starter assembly, includes the cover, rewind spring, lock, pulley, overrunning bearing and housing Part # a-59494-1, 55937, 64180, 58009, a-59495, 58480-a, 59094 Condition: good used/working shape Fits: came off a Homelite C51 / C 51, will also fit some other C series chainsaws
(2 in stock)
Homelite Zip Chainsaw Fuel Tank
Gas fuel tank assembly In good used shape Fits Homelite Zip and others
Homelite 5-30N Chainsaw Starter pulley and ratchet
Starter recoil rope pulley and one way ratchet starting mechanism In good used shape Fits Homelite 5-30 and 7-29
Homelite 5-30N Chainsaw Starter Screen and Bracket
Starter recoil rewind screen, with spring with bracket a74362 In good used shape Fits Homelite 5-30 and 7-29
homelite C-9 chainsaw reed valve assembly
Part: reed valve assembly Condition: good used/working shape Fits: Homelite C-9, c9, c series, c 9
Homelite 5-30 Chainsaw Fuel and Oil Tank Assembly
Fuel gas and oil tank assembly with a bunch of other parts. In good used shape Fits Homelite 5-30n, 5-30, 26LCS and others
Homelite 5-30 Chainsaw Full Wrap Top Handle Assembly
Full wrap around chrome top handle assembly with hardware and chain guard In good used shape Fits Homelite 5-30n, 5-30, 26LCS and others
Homelite 5-30 Chainsaw Cylinder Cover Shroud
Cylinder engine cover shroud In good used shape Fits Homelite 5-30n, 5-30, 26LCS and others
Homelite VI-944 Chainsaw Rear Rubber mount set
Set of 3 rubber AV buffer handle mounts for the rear handle In good used shape Fits Homelite VI944, VI955, VI-944, VI-955
Homelite 360 Chainsaw Piston and Cylinder Set
Top end motor kit includes: cylinder, piston, rings, wrist pin. In good used shape Fits Homelite 350 360 35SL SL
Homelite C-5 Chainsaw model identification tag
Model ID tag plate In good used shape Fits Homelite c5, c-5
(1 in stock)
Homelite VI-944 Chainsaw Starter Pulley
Starter recoil rewind pulley rope spool 64398-A, 64398a, In good used shape VI944 VI955 VI 944 955 XL-700 XL-800
Homelite 42cc Chainsaw Inner Guide Plate
Inside guide bar plate 638515001 In good used shape Fits Homelite 42cc UT10586 and others
(2 in stock)
Homelite 42cc Chainsaw Throttle Linkage
Throttle link 678603001 In good used shape Fits Homelite 42cc UT10586 and others
Homelite 42cc Chainsaw Intake Boot
Intake manifold boot 570757001 In good used shape Fits Homelite 42cc UT10586 and others
(1 in stock)
Homelite 42cc Chainsaw Air Filter and Box
Air filter with box. 901652001, 518762001 In good used shape Fits Homelite 42cc UT10586 and others
(1 in stock)
Homelite 42cc Chainsaw Handle Assembly
Top and rear trigger handle assembly 518755001 In good used shape Fits Homelite 42cc UT10586 and others
Homelite XL-123 Chainsaw Rear Trigger Handle Assembly
Rear trigger handle, oil tank assembly. Includes: rear handle castings, throttle parts, and some of the oiler parts. In good used shape Fits Homelite XL123, XL-76, XL76 and others
Homelite XL-123 Chainsaw Piston and Cylinder set
Top end motor kit includes: cylinder, piston, rings, wrist pin, and keeper clips. 1-13/16" bore In excellent shape. Piston and rings are near new, cylinder is in good overall shape but has one small groove on the cylinder wall. Makes excellent compression. Fits Homelite XL76, XL-76, XL-123,...
Homelite Ranger 33cc 38cc Chainsaw Hand Guard
Hand guard or chainbrake handle UP06568 In good used shape Fits Many homelite models 33cc 38cc 45cc UT10926 and others
Homelite 410 Chainsaw Manual Oil Pump
Manual oiler oil pump assembly A96976, A-96976 Tested in good used shape Fits Homelite 410 series
homelite c-72 chainsaw phelon flywheel only
Part: phelon flywheel rotor Part#s 64053-a Condition: good used/working order Fits: Homelite C 72
(3 in stock)
Homelite Super XL Chainsaw Carb Grommet Short HS
Short carburetor adjust grommet for HS carbs In good used shape Fits Homelite SXL, XL-12
Homelite 180 Classic Chainsaw Body Case Handle housing
Engine case saw body handle housing. 02494 In good used shape Fits Homelite 180 200 XL Chainsaw Classic
Homelite 300 Classic Chainsaw Top cover
Top cover shroud 00220 In good used shape Fits Homelite: 300 Classic, CS-50, CS50, CS-40, CS40, 252
Homelite 360 Chainsaw Ignition coil 12669-as NEW (H-EAD)
Ignition coil 12669as, 12669 NEW Fits Homelite 350 360 and others
Homelite XL-800 Chainsaw Wico Ignition Coil 63625 NEW (H-EAD)
Wico ignition coil 63625 NEW Fits Homelite XL700 XL800 XL800AM XL870 XL921 XL923 XL901 XL903 VI944 XL-700 XL-800 XL-901