homelite xl-76 chainsaw guide bar plate set
Part: set of inner and outer bar plates with spring holder Condition: have some wear, in good used/working order Fits: Homelite XL 76
Homelite XL-76 Chainsaw Drivecase Cover Assembly
Clutch cover, with chain tensioner In good used shape Fits Homelite XL76 and others.
Homelite XL-76 Chainsaw Muffler Assembly
Muffler assembly with baffle and bolts In good used shape Fits homelite XL 76, XL-123, and others
homelite 330 chainsaw guide bar adjusting pin pn 65112-1
Part: pin for the tensioner Part # 65112-1 Condition: good used/working order Fits: Homelite 330
homelite 330 chainsaw guide bar adjusting screw pn 65175-a
Part: tensioner screw Part # 65175 a Condition: good used/working order Fits: Homelite 330
homelite super ez chainsaw clutch plate washer
Part: clutch plate Condition: good used/working order Fits: homelite super ez
homelite xl-2 chainsaw points and condenser
Part: points with condenser Condition: good used/working shape Fits: Homelite XL 2
Homelite 330 Chainsaw Chainbrake Kit
Chain brake, chain guard kit In good used shape Includes brake band, hand guard brake handle, dust shield, and an assortment of the hardware to install it.
(1 in stock)
homelite 33cc, ranger chainsaw handle cover with throttle trigger and lockout kit
Part: rear handle kit with throttle trigger, safety lockout interlock and throttle pin lock Condition: good used/working order Fits: Homelite 33cc Ranger
homelite 410 chainsaw muffler front cap only
Part: muffler exhaust cap Part # a-93355-a Condition: good used/working shape Fits: Homelite 410
(1 in stock)
homelite 240 chainsaw muffler assembly (prior to lot d200)
Part: muffler. Part # 94887, 94886, 94888, 95637, 93983-07 Condition: good used/working order Fits: some models of Homelite 240
(1 in stock)
homelite 290, 340 chainsaw muffler only (type with front spark arrestor)
Part: muffler with front spark arrestor Condition: good used/working order Fits: Homelite 290, 340
homelite 340, 290 chainsaw muffler only (non spark arrestor type)
Part: muffler, not equipped to take a spark arrestor Condition: good used/working order Fits: Homelite 290, 340
homelite 240 chainsaw muffler baffle, spark arrestor and spacers
Part: spark arrestor screen, spacer set and baffle Part # 94888, 93983-07, 95637 Condition: good used/working shape Fits: Homelite 240 chainsaw models prior to lot D200
homelite xl-76 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working order Fits: Homelite XL 76
homelite xl, super 2 chainsaw set of 4 screws for the engine case
Part: screw, set of 4 for the engine housing case Part # 88063 Condition: good used/working order Fits: Homelite xl, super 2
homelite 26lcs chainsaw clutch mechanism assembly
Part: clutch mechanism - includes the shoes, carrier / rotor, spring and keys Condition: good used/working order Fits: Homelite 26lcs
homelite 33cc ranger chainsaw rear trigger handle kit
Part: rear trigger handle with 2 av spring isolator mounts, throttle trigger, safety lever interlock, throttle cable Condition: good used/working shape Fits: Homelite 33cc and some other Homelite models
homelite super xl, xl-12 chainsaw muffler cover front only
Part: muffler cover Part # a-93982 Condition: good used/working order Fits: Homelite Super XL, XL 12
homelite xl chainsaw muffler body only
Part: muffler body Part # 93986 Condition: good used/working order Fits: Homelite XL, Super 2
homelite xl-98 multi purpose saw back plate
Part: back plate housing with loose roller bearings Part # 96728-a Condition: good used/working shape Fits: some models of Homelite XL98 / XL 98 multi purpose saws
homelite xl-98d multi purpose saw air filter cover and knob
Part: air filter cover and knob Condition: good used/working shape, rusty Fits: Homelite XL 98 saw
homelite xl-901, xl-903, xl-904 chainsaw air filter cover and knob
Part: air filter cover and cover mounting nut Part # 63684-1 and a-63582-a Condition: good used/working shape. A few of the prongs on the backside are chipped. Fits: Homelite xl 903, 901, 904
homelite xl-12 chainsaw crankshaft and connecting rod
Part: crank shaft, connecting rod, wrist pin, and woodruff key Part # 63497-1, a-63477-b Condition: good used/woking shape Fits: Homelite XL 12
homelite 192 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite 192
homelite 330 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware- screws, bolts, gaskets, grommet 94381 (includes everything pictured) Condition: good used/working shape Fits: Homelite 330
(2 in stock)
homelite 23av, 27av chainsaw fuel cap
Part: fuel / gas tank cap Condition: good used/working shape Fits: Homelite 23 and 27 av
homelite 450 chainsaw top handle bar
Part: flush cut handlebar. PN a-12342-a Condition: good used/working order Fits: Homelite 450
homelite xl chainsaw orange walbash ignition coil for electronic systems
Part: walbash ignition coil for models which have electronic systems Condition: tested and in good used/working order Fits: some models of Homelite XL
homelite 450 chainsaw oil pump plunger and cover
Part: oil pump plunger and cover Part # a-12356-a, a-70374 Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw lot of assorted hardware
Part: lot of misc. hardware- screws, bolts, washers, nuts (includes everything pictured) Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw complete clutch assembly (without lined shoes)
Part: 3/8-8 clutch assembly - includes the sprocket drum, mechanism (shoes, springs, carrier), bearing, race and washers Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw piston, cylinder and crankshaft assembly
Part: cylinder, piston, crank shaft, connecting rod, rings Part # a-70056-a, 12309 Condition: good used/working shape. No breaks, good compression. Fits: Homelite 450
homelite xl chainsaw cylinder type 5
Part: cylinder Condition: good used/working shape. No breaks, good bore. Fits: some models of Homelite XL, these models have some varying differences in the cylinders, so check yours to make sure it matches
homelite 340 chainsaw piston with crankshaft
Part: piston and ring with crank shaft and connecting rod Part # a-98189 Condition: good used/working shape Fits: Homelite 340
homelite xl, super 2, 180, 200, 192 chainsaw air filter housing box (xl bin)
Part: air filter housing with screws Part # 02491-a Condition: good used/working shape Fits: Homelite XL, Super 2, 192, 200, 180
homelite xl chainsaw 3/8 LP clutch sprocket assembly
Part: clutch- includes 3/8 LP spur sprocket, mechanism (shoes, springs, carrier), nut, washers and loose needle bearings for the sprocket Condition: good used/working shape Fits: some Homelite XL models
(1 in stock)
homelite super ez chainsaw flywheel assembly type 3 phelon for electronic
Part: phelon flywheel and starter pawls for electronic systems. Part # 95218-as Condition: good used/working shape Fits: some models of Homelite Super EZ
homelite super xl, xl-12 chainsaw black fuel cap #1 no gasket
Part: fuel/ gas cap, does NOT include/is missing the gasket Condition: good used/working shape Fits: some earlier models of Homelite Super XL, XL-12 chainsaws
homelite xl-101 chainsaw cylinder
Part: cylinder. Part # 63165 / 63165-a Condition: good used/working shape. Good bore, no breaks. Fits: Homelite XL 101
homelite 450 chainsaw cylinder
Part: cylinder Condition: good used/working shape, good bore/no breaks Fits: Homelite 450
homelite 450 chainsaw crankcase and cylinder assembly
Part: crank case and cylinder with deflector, guide bar bolts. Part # a-70055-b Condition: one of the fins has a break as pictured. In working/usable condition Fits: Homelite 450
homelite 360 chainsaw cylinder #2
Part: cylinder Condition: one of the fins has a break as pictured, in usable/working order Fits: Homelite 360
(1 in stock)
homelite 46cc, pro 4620c chainsaw crankshaft assembly
Part: crank shaft with connecting rod Condition: good used/working shape Fits: Homelite 46cc, pro 4620 C
homelite pro 4620c, 46cc chainsaw cylinder
Part: cylinder Condition: good used/working shape. No breaks, good bore Fits: Homelite pro 4620 c, 46cc
homelite 33cc ranger chainsaw piston and crankshaft #1 with ring
Part: piston with crank shaft, connecting rod and engine pan Condition: good used/working shape Fits: Homelite 33cc Ranger
homelite 33cc ranger chainsaw primer bulb
Part: primer bulb Part # 01183 Condition: good used/working shape Fits:Homelite 33cc ranger
homelite 33cc ranger chainsaw piston, crankshaft, and crankcase
Part: crankcase engine pan with piston, ring, crank shaft and rod Part # 04909, a04935, PA00979 Condition: good used/working shape Fits: Homelite 33cc Ranger
homelite xl-902 chainsaw manual oil pump assembly
Part: manual oiler with chain oiler lever, rod. Part # 63343 /63343-1 + Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws / bolts (includes everything pictured) Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw air deflector and bracket
Part: air filter deflector with bracket Condition: good used/working shape Fits:Homelite XL 902
homelite xl-902 chainsaw muffler assembly
Part: muffler with hardware Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw rear trigger handle housing
Part: rear handle housing - bare bones Part # 63006-a Condition: good used/working shape Fits: Homelite XL 902
homelite pro 4620c, 46cc chainsaw bar plate
Part: guide bar plate Condition: good used/working shape Fits: Homelite Pro 4620 C, 46cc
(1 in stock)
homelite 290, 340 chainsaw oil pump gear and hub (HM-1216)
Part: gear and hub for the oil pump Part # A-98263 Condition: good used/working shape Fits: Homelite 290, 340
homelite 290, 340 chainsaw air filter top half only
Part: top half / cover of the air filter Condition: good used/working shape Fits: Homelite 290, 340
homelite 240 chainsaw cylinder
Part: cylinder Condition: good used/working shape Fits: Homelite 240
(1 in stock)
homelite pro 4620c chainsaw carb adjust grommet
Part: carburetor adjust grommet sleeve Condition: good used/working shape Fits: Homelite Pro 4620 c, 46cc
(1 in stock)
homelite pro 4620c, 46cc chainsaw fuel and oil cap set
Part: set of fuel and oil tank caps Condition: good used/working shape Fits: Homelite Pro 4620 c, 46cc
homelite super ez 250 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws / bolts / nuts (includes everything pictured) Condition: good used/working shape Fits: came off a Homelite Super EZ 250, most will also fit Homelite Super ez
homelite super ez 250 chainsaw handle bar bracket kit
Part: handle bar bracket with shock mount, should bolts, grommets part # 65035 + Condition: good used/working shape Fits: Homelite Super EZ 250
(1 in stock)
homelite super ez 250 chainsaw bar plate
Part: guide bar plate Condition: good used/working shape Fits: Homelite Super ez 250
(1 in stock)
homelite super ez 250 chainsaw clutch drivecase cover
Part: drivecase clutch sprocket cover Condition: good used/working shape. Has some minor chipping / oxidation Fits: Homelite super ez 250
homelite super ez 250 chainsaw complete rear throttle handle
Part: rear throttle handle with trigger, throttle rod, switch, handle grip, grommets, spring and post check valve. Part #s a-65215-d, 65023, 65174, 65056, a-63938, 65042-3a + Condition: good used/working shape Fits: Homelite Super EZ 250
homelite 410 chainsaw hose line and pickup
Part: hose line with pickup screen Condition: good used/working shape Fits: Homelite 410
homelite xl-902 chainsaw oil lines and fittings
Part: fitting and oil line / hose set - includes everything pictured Condition: good used/working shape Fits: Homelite XL902 / XL 902
homelite xl-902 chainsaw top handle bar
Part: top handlebar Condition: good used/working shape Fits: Homelite XL 902 / XL902
homelite xl-902 chainsaw adjusting pin and nut
Part: bar adjuster pin and nut for the tensioner Condition: good used/working shape Fits: Homelite XL 902 / XL902
homelite xl-902 chainsaw throttle handle cover
Part: rear trigger handle half with throttle lock Part # 63007-b Condition: good used/working shape Fits: Homelite XL902 / XL 902
homelite 410 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite 410
homelite 410 chainsaw muffler assembly #2
Part: muffler Condition: good used/working shape Fits: Homelite 410
(1 in stock)
homelite xl-902 chainsaw blue starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Homelite xl 902
homelite super ez chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws, bolts, nuts (includes everything pictured) Condition: good used/working shape Fits: Homelite super ez
homelite super ez chainsaw fuel and oil cap set
Part: set of caps, one for fuel and one for oil Condition: good used/working shape Fits: Homelite Super ez
homelite 410 chainsaw flywheel key
Part: key for the flywheel Condition: good used/working shape Fits: Homelite 410
(2 in stock)
homelite 150 chainsaw piston and ring set
Part: piston with rings A-68642, A68642 Condition: good used/working shape Fits: Homelite 150 auto Automatic
homelite 410 chainsaw crankcase nut and retainer set of 4
Part: set of 4 nuts and retainers for the crankcase Condition: good used/working shape Fits: Homelite 410
(3 in stock)
homelite 410 chainsaw crankcase half (left, flywheel side)
Part: left, flywheel side of the crank case housing. Bearing is NOT good/included Condition: good used/working shape Fits: Homelite 410
homelite ez 250 chainsaw piston ring
Part: piston ring Condition: good used/working shape Fits: Homelite E-Z 250
Homelite EZ 250 Chainsaw Ignition Coil assembly complete
Complete ignition: coil, points, condenser, and wires Tested, in good used shape. Makes good spark Fits Homelite EZ 250
Homelite EZ 250 Chainsaw Tank assembly
Fuel and oil tank assembly In good used shape, no breaks or leaks Fits Homelite EZ 250
homelite xl chainsaw piston only #1
Part: piston and pin only (does not have the ring). Part # a-69393 Condition: good used/working shape Fits: Homelite XL
homelite xl-902 chainsaw piston and cylinder set
Part: piston and cylinder with rings, connecting rod Condition: Has some dings on top of the piston, in good used/working shape. Came off a saw with good compression, no breaks. Fits: Homelite XL 902
homelite choke clip part # 69071 new (box 71)
Part: choke clip Part # 69071 Condition: new old stock part Fits: some Homelite models Location: Homelite box 71
homelite O ring part # 68072 new (box 71)
Part: O ring Part # 68072 Condition: new old stock part Fits: some Homelite models Location: Homelite box 71
homelite super xl, xl-12 chainsaw grommet set
Part: set of 3 grommets Condition: good used/working shape Fits: homelite super xl, xl 12
(1 in stock)
homelite cs50 300 classic chainsaw starter cover and pulley assembly
Part: starter housing cover with rewind spring and pulley Condition: good used/working shape Fits: Homelite 300 classic, cs-50, cs 50
(3 in stock)
homelite super 2 chainsaw engine housing #2 early model
Part: metal rear trigger handle / engine case body housing, bare bones. 95271 Condition: good used/working shape. has some minor chipping Fits: homelite super 2
homelite 245 chainsaw clutch cover with chain tensioner
Part: clutch / drivecase cover (A-97057) with chain adjuster screw and pin Condition: good used/working shape-has a crack on front of cover Fits: homelite 245
homelite xl-400 chainsaw top handle bar
Part: top wrap handlebar (a-63909-4) with clamp (63291-a) Condition: good used/working shape Fits: homelite xl400 / xl 400
homelite chainsaw large safe-t-tip (super ez bin)
Part: safety tip for the bar Condition: good used/working shape Fits: homelite super ez and some other models
homelite 330 chainsaw starter rewind spring container
Part: starter rewind spring container/holder Condition: good used/working shape Fits: homelite 330
homelite super xl 925 chainsaw rear trigger handle #2
Part: rear trigger handle housing, bare bones, metal casting only Condition: good used/working shape Fits: homelite super xl 925
(2 in stock)
homelite super 2, xl chainsaw clutch washer
Part: clutch sprocket washer Condition: good used/working shape Fits: homelite super 2, xl
homelite xl-925 chainsaw rear handle throttle cover
Part: rear handle cover half Condition: good used/working shape Fits: homelite xl 925
homelite xl-925 chainsaw throttle rod
Part: throttle rod link, part # 63266-a Condition: good used/working shape Fits: homelite xl-925
homelite xl-925 chainsaw ignition off switch
Part: toggle off switch, part # a-57650-3 Condition: good used/working shape Fits: homelite xl 925
homelite xl-925 chainsaw idle speed screw
Part: idle speed adjustment screw Condition: good used/working shape Fits: homelite xl 925