We have lots of used vintage and new current model saw parts in stock. We have also bought out several Dolmar dealers in the last years and have some NOS dolmar parts on hand.
Dolmar Screw 994 005 307 NEW (DB-5)
Screw 994005307 NEW Fits many dolmar models
(2 in stock)
Dolmar PC7300 Saw Choke Shaft 394 150 040 NEW (DB-5)
Choke shaft link. 394150040, 394 150 042, 394150042 NEW Fits Dolmar PC-7300 chop saw cutoff saw and others
Dolmar washer 926 208 001 NEW (DB-5)
Wave lock washer 926208001 NEW Fits many Dolmar models
Dolmar 309 Chopsaw Distance Ring 900 005 075 NEW (DB-5)
Distance ring spacer 900005075 NEW Fits Dolmar 309 343 Cut-off saws and others
Dolmar PS9000i Chainsaw E clip 927 308 000 NEW (DB-5)
Safety e c clip. 927308000 NEW Fits Dolmar PS 9000 9010 9000i 9010i PS9000i PS9010i PS9000 PS9010 i
(3 in stock)
Dolmar 309 Cut-Off Saw Adjusting Screw 910 308 601 NEW (DB-5)
Adjustment adjusting thumb screw. 910308601 NEW Fits Dolmar 309 343 Chop saw cutoff saws
Dolmar Screw 908 006 355 NEW (DB-5)
Torx head screw 908006355 NEW Fits many dolmar models
Dolmar 120s Chainsaw 49mm Piston Ring 121 132 020 NEW (DB-5)
49mm bore piston ring 121132020 NEW Fits 120s 120 Super and others
Dolmar Chop Saw 7/8" Arbor Shaft 398 228 023 NEW (DB-5)
7/8 Cutting arbor shaft NEW Fits many Dolmar chopsaw and cut off saw models
Dolmar 133 Chainsaw Intermediate Flange Gasket 133 131 041 NEW (DB-5)
Rubber sealing gasket for the intake manifold, intermediate flange. 133131041 NEW Fits Dolmar 133 133S Super 143 etc.
Dolmar pc7312 Cutoff Saw Switch Wire 965 605 433 NEW (DB-5)
Cable wire with plug 965605433 NEW Fits many concrete saws, chop saws, demo saws, and cut-off saws. Dolmar : PC 6412, 6414, 6430, 6435, 7312, 7314, 7330 & 7335, PC6412, PC6414, PC6430, PC6435, PC7312, PC7314, PC7330, PC7335. Makita : DPC 6200, 6201, 6400, 6401, 7300, 7301, 7310, 731...
Dolmar PC-8140 Cutoff Saw Starter Pulley 394 162 040 NEW (DB-5)
Starter Pulley rope spool, cable drum. Dolmar part number 394162040 New aftermarket part Fits Dolmar and Makita Chop saws. Models 8140 PC8140
Dolmar 309 Chopsaw Pressure Disk 395 228 053 NEW (DB-5)
Cutting pressure disk 395228053 NEW, has been in storage, may have slight oxidation Fits Dolmar 309 343 Cut-off saws and others
Dolmar 309 Chopsaw Pressure Disk 395 228 052 NEW (DB-5)
Cutting pressure disk 395228052 NEW Fits Dolmar 309 343 Cut-off saws and others
Dolmar 119 chainsaw piston assembly 47mm 119 132 100 NEW (DB-5)
Piston w/ rings, wrist pin, and clips Dolmar Part Number 119 132 100, 119132100 NEW Fits Dolmar 119, 117, 120
Dolmar BC-330 Brush Cutter Gear Head
Bevel gear head. 370 211 100, 370211100 In good used shape Fits Dolmar BC330 and others
Dolmar BC-330 Brush Cutter Parts
Protective guards, protective cup, attachment hardware, foot plate and other parts and pieces. In good used shape Fits Dolmar BC330 and others
Dolmar PS-35 Chainsaw Clutch Mechanism 125 180 200 NEW (D-34)
Clutch mechanism with shoes, springs and rotor. 125180200, 168607-9 NEW Fits model PS35 PS32 PS 35 32 and others
Dolmar BC-330 Brush cutter cylinder cover
Cylinder cover shroud. 021 118 012 In good used shape Fits Dolmar BC330 trimmer, brush cutter
dolmar 123 chainsaw and 309 saw piston and rings used pn 122 132 100 (includes pin and clips)
Part: piston with rings with wrist pin and clips Part # 122132100 Condition: used good usable Fits: Dolmar 123 chainsaws and 309 cut off saws
Dolmar 5105 chainsaw hardware kit
Hardware kit includes all the nuts, bolts, screws and small parts pictured. In good used shape Fits Dolmar 5100s, 5100, 5105, 510, 460 PS 5105 PS460 PS510 PS5105 PS5100s all series chainsaws
Dolmar 123 Chainsaw Small Inner Spike Bar pn 123 250 020
Inner bucking spike felling dawg PN 123250020 Good Used, Usable Dolmar 123, 133, 133s, 133 super, 143
Dolmar 123 Chainsaw Muffler
Dolmar 123 muffler exhaust assembly. 133 173 400, 133173400 In good used shape Fits Dolmar 123 133
Dolmar 112, 114, 117, 120, 118 chainsaw outer guide bar plate
Part: guide plate, outer Part # 118 111 150 Condition: in good used shape Fits: Dolmar 112, 114, 117, 118, 120
(2 in stock)
Dolmar PS-421 Chainsaw Piston and Cylinder 195 131 202 NEW (DB-3)
Top end motor kit includes: cylinder head, piston with ring, wrist pin, and keeper clips. 195131202 NEW Fits Dolmar PS421, and can be retrofit as an upgrade onto PS351 PS-351
(2 in stock)
Dolmar PS-421 Chainsaw Top Handle 195 310 010 NEW (DB3)
Plastic wrap around top handle. 195114180 NEW Fits Dolmar PS421, PS-421, PS420, PS-420, PS350, PS-350, PS-351, PS351 EA4300 EA 4300
Dolmar 133s, 143 chainsaw muffler front
Part: muffler front face Condition: good used/working shape Fits: Dolmar 133 Super, 143
56mm x 1.2mm Piston Ring for Dolmar, Stihl, Husqvarna NEW
1.2 x 56 millimeter piston ring. Husqvarna part number 503 28 90-35 NEW aftermarket part Fits Husqvarna 395xp 395 XP. Stihl 066 MS660 big bore.
Dolmar 133s Chainsaw Piston and Cylinder Kit 52mm
Top end motor kit includes: cylinder head, piston, rings, wrist pin, and wrist pin bearing. 133 130 201, 133130201 In good used shape. Fits Dolmar 133 Super
Dolmar 133s, 143 chainsaw muffler assembly
Part: muffler, part # 133 174 430, 133174430 Condition: good used/working shape Fits: Dolmar 133 Super, 143
Dolmar 123, 133, 133s chainsaw SEM flywheel with fan
Part: SEM flywheel rotor with fan wheel. Condition: in good used shape Fits: some models of Sachs-Dolmar 123, 133, 133 super
dolmar 120s chainsaw sem electronic flywheel and fan
PART: flywheel and outer fan, inner magneto CONDITION: good used/working order FITS: Dolmar 120 s super with electronic systems
Dolmar PS-6100 Chainsaw Top Handle 130 310 100 NEW (PS6100)
Half wrap top handle. Tubular handle. 130310100 NEW Fits Dolmar PS6100
(2 in stock)
Dolmar PS-6100 Chainsaw Throttle Cable 130 117 040 NEW (PS6100)
Throttle control cable 130117040 NEW Fits Dolmar PS6100
Dolmar 119 Chainsaw handle screw 991 606 167
M6 Fillister head screw 991606167 In good used shape Fits Many models of dolmar 112 114 113 116 117 119 120
Dolmar 143 Chainsaw Piston & Cylinder Assembly
Part Name: piston and cylinder with the piston rings, pin, bearing part numbers : 031 130 003, 031 132 001, 031130003, 031132001 Condition Description: in good used shape-no breaks-has good compression and is not scored Fits the Following Models: Dolmar 143
Dolmar 113 Chainsaw Hardware and Small Parts Kit #1
Hardware kit includes all the screws, bolts, nuts and small parts pictured In good used shape Fits Dolmar 113 116
(1 in stock)
Dolmar 116 Chainsaw Flywheel Side Case Half
112 111 510, 112111510 Flywheel magneto left side crank case crankcase half In good used shape (small pin hole broke out in the area around the flywheel fan) but in excellent used shape. Fits Dolmar 113 and 116
dolmar 117, 119, 120, 120s chainsaw muffler front only front
Part: muffler front cover lid Condition: good used/working shape ,Has small superficial cuts on guard please note picture Fits: Dolmar 117, 119, 120, 120s
Dolmar PS-340 Chainsaw Big End Rod Bearing Set
Set of big end rod bearing needle rollers set of 12. 962 640 061. In good used shape Fits Dolmar 100 100 Super 102 PS-340 PS-401 PS340 PS401 962 640 061
dolmar 109 to ps-540 chainsaw clutch shoes
Part: clutch shoe set Part of assembly number # 020 180 000 Condition: good used/working shape Fits: dolmar 109, 110, 111, 115, ps-43, ps-52, ps540
dolmar 123, 133, 133s chainsaw flywheel with fan
Part: Bosch flywheel rotor with fan wheel. Condition: good used ,Usable Fits: some models of Sachs-Dolmar 123, 133, 133 super
(2 in stock)
dolmar 123, 133, 133s chainsaw flywheel magneto 119 141 000
Part: inner flywheel magneto Part # 119141000 Condition: used Fits: some models of Sachs-Dolmar 123, 133, 133 super
Dolmar 5100s Chainsaw spark arrester
spark arrester screen 181 174 250 good used ,usable Fits Dolmar PS5100 s, PS-5100s, PS460, PS-460, PS-510, PS510
Dolmar 6800i Chainsaw Fuel Line and Fitting
Inner fuel line and nipple. 965 402 402, 965 451 185 In good used shape Fits Dolmar 6000i and 6800i
Dolmar 109 Chainsaw Old Style Chainbrake Band Kit
Old style brake band kit with hardware, springs, lever and all. In good used shape Fits older model Dolmar 109 110 111i 115i with the chainbrake handle that only attaches on one side
Dolmar 120 Super Chainsaw Piston and Cylinder Set 49mm
Complete OEM 49mm bore top end motor kit includes: cylinder head, piston, rings, wrist pin, pin bearing. 121 130 000, 121130000, 121 130 010, 121130010 In good used shape Fits Dolmar 120S 120S 120 Super only (not the later si version)
Dolmar PS7900 Chainsaw Oil seal protection washer
Shim washer disk that goes behind the oil pump worm drive gear 038 224020, 038224020, 038 224 021, 038224021 In good used shape Fits PS 6300 6400 7300 7900 7310 7910 PS6300 PS6400 PS7300 PS7900 PS7310 PS7910
(1 in stock)
Dolmar PS7900 Chainsaw Clutch mechanism washer
Big washer that mounts behind the clutch mechanism 001 182 042, 001182042, 001 182 041, 001182041 In good used shape Fits PS 350 351 420 421 6300 6400 7300 7900 7310 7910 PS350 PS351 PS420 PS421 PS6300 PS6400 PS7300 PS7900 PS7310 PS7910
Dolmar 123 Chainsaw Inner Bar plate
Inside guide bar plate 123 111 031 In good used shape Fits Dolmar 123 133 133s and others
(1 in stock)
Dolmar PS34 Chainsaw Cylinder 036 131 015 NEW (DB-2)
Cylinder head 036131015 New OEM part Fits Makita and Dolmar PS-34 and others
(2 in stock)
Dolmar 110 Chainsaw Old Style Cog Type Starter Assembly
Complete starter recoil rewind assembly. Old cog style. In good used shape Fits first generation Dolmar 109 110 111
Dolmar 120S Chainsaw Crankshaft Assembly
Crank shaft assembly with rod 121 120 001, 121 120 000 In good used shape Fits Dolmar 120 Super
(2 in stock)
Dolmar 120si Chainsaw Bottom Housing
Carb air box bottom housing 030 118 081 In good used shape Fits Dolmar 116si 120si
Dolmar 113 Chainsaw Ignition Coil
Ignition coil 114 143 500 Tested in good used shape Fits Dolmar 113 116
Dolmar PS-7900 Chainsaw 79cc Piston and Cylinder (cracked cooling fins)
52mm bore piston and cylinder assembly 038 130 070, 038130070 In good used shape, with the corners broken off a couple of the top cooling fins (as pictured Fits Dolmar PS6400 PS7300 PS7900, PS-6400, PS-7300, PS-7900
Dolmar 5105 chainsaw fuel tank vent kit 957 114 061
Gas tank vent valve assembly, air valve cpl. Dolmar part number 957 114 061, 957114061 In good used shape Fits Dolmar 5105, 5100s, 5100 and many others
Dolmar PS6400 Chainsaw Piston Ring 47mm 325 132 050 NEW (box 34)
47mm x 1.2mm Piston ring 325132050 NEW oem ring Fits Dolmar PS-6400, PS6400c, PS-6400c, DCS-6400, DCS-6401 and others
Dolmar 109 Chainsaw Piston and Cylinder Set
OEM 40mm bore. Complete top end motor kit with: cylinder, piston, ring, wrist pin, and keepers. 020 130 030 In nice used shape Fits Dolmar 109
Dolmar 123 Chainsaw Starter Cable Drum 122 162 010
Starter pulley, cable rope drum. Part number 122 162 010, 122162010 In good used shape Fits model 122, 122s, 122sa, s sa, 123 133
Dolmar 119 Chainsaw air filter gasket
Air filter foam gasket 965 402 941 In good used shape Fits 119 117 120 120s
dolmar 133s chainsaw top cover
Part: Top cover cylinder shroud 133 118 085 Condition: good used/working shape Fits: dolmar 133 Super, 143
Dolmar PS-540 Chainsaw Fuel Tank Vent
Gas tank vent valve 957 114 010 In good used shape Fits PS-540, 115i, 111i, 110i
Dolmar 109 Chainsaw Trigger Kit
Throttle trigger and safety kit and catch lever 020 117 290, 020 117 301 In good used shape Fits Dolmar 109 110 111 115 115i 110i 111i PS-540 and Makita 520i
(1 in stock)
Dolmar 114 Chainsaw Top Cover
Top cylinder cover shroud 114 118 010, 114118010 In good used shape Fits Dolmar 114
Dolmar 119 Chainsaw Fuel line
In tank fuel/suction line 965 402 402 In good used shape Fits Dolmar 117 119 120 120s 112 114 113 116 and others
Dolmar 133S Chainsaw Rim Type Clutch Drum
Sprocket clutch drum with bearing and 3/8-8 rim sprocket 123 233 000 In good used shape Fits Dolmar 133 s 143
Dolmar 108 Chainsaw Fuel cap
Gas filler cap 965 451 941 In good used shape Fits Dolmar 103 105 108
Dolmar 114 Chainsaw Fuel tank
Cast metal gas fuel tank. 119 114 090 In good used shape Fits Dolmar 114 112 119 117 and others
dolmar ps-7900H, ps-7300H, ps-6400H chainsaw handle heater switch NEW 975 001 250 (Dol 28)
Part: handle heater switch Replaces Part # 975001250 Condition: new Fits: Dolmar PS 7900, 7300, 6400, 6400c, 7910, 7910c, PS7910h, PS6400h, 7910h, 6400h with heated handles
dolmar 109 to ps-540 chainsaw spur sprocket (.325-8) used
Part: spur sprocket drum Condition: good used/working shape Fits: dolmar 109, 110, 111, 115, ps-43, ps-52, ps540
(3 in stock)
dolmar 118 chainsaw screw 990 004 124 new (d-25)
Part: screw Part # 990004124 Condition: new, old stock Fits: Sachs-Dolmar 118
(3 in stock)
dolmar chainsaw snap ring 119 150 350 new (d-25)
Part: snap ring / circlip Part # 119150350 Condition: new, old stock Fits: some Sachs-Dolmar models
dolmar 118 chainsaw snap ring 929 114 100 new (d-25)
Part: snap ring / circlip Part # 929114100 Condition: new, old stock Fits: Sachs-Dolmar 118, may fit others
dolmar 118 chainsaw bar stud gudgeon 905 808 354 new (d-25)
Part: bar stud Part # 905808354 Condition: new old stock Fits: Sachs-Dolmar 118
(3 in stock)
dolmar 118 chainsaw clutch guide disc 118 182 021 new (d-25)
Part: guide disc Part # 118182021 Condition: new old stock Fits: Sachs-Dolmar 118
(4 in stock)
dolmar 118 chainsaw lubricating wick 144 145 000 (d-25)
Part: lubricating wick Part # 144145000 Condition: new old stock Fits: Sachs-Dolmar 118
dolmar chainsaw o ring 963 234 040 new (d-23)
Part: O ring gasket Part # 963234040 Condition: new old stock Fits: some Sachs-Dolmar models
(1 in stock)
dolmar 118 chainsaw cam 118 141 010 new (d-23)
Part: cam Part # 118141010 Condition: new, old stock Ftis: Sachs-Dolmar 118
dolmar 118 chainsaw carburetor screen 107 150 230
Part: carb screen Part # 107150230 Condition: new old stock Fits: Sachs-Dolmar 118, may fit others
dolmar 118 chainsaw carb control lever 118 150 280 new (d-24)
Part: carburetor control lever Part # 118150280 Condition: new old stock Fits: Sachs-Dolmar 118, may also fit other
dolmar 122s, 122sl, 122 chainsaw screw 991 105 165 new (d-24)
Part: 5x16 fillister screw Part # 991105165 Condition: new old stock Fits: Sachs-Dolmar 122s, 122sl, 122, may also fit others
dolmar 122s, 122sl chainsaw filter housing 122 173 130 (d-24)
Part: air filter housing base Part # 122 173 130 Condition: new old stock, has some small/minor cracks around bolt hole from age/storage Fits: Sachs-Dolmar 122 s/sl
dolmar 119, 120 chainsaw air filter cover 119 118 020 new (d-118)
Part: air filter cover hood Part # 119118020 Condition: new, old stock Fits: Dolmar 119, 120
(1 in stock)
dolmar 118 chainsaw bar stud gudgeon 905 803 354 new (d-24)
Part: bar stud / gudgeon Part # 905803354 Condition: new, old stock Fits: Dolmar 118
(1 in stock)
dolmar 118 chainsaw crankcase half, magneto side 118 111 201 new (d-118)
Part: crank case half, magneto side Part # 118111201 Condition: new, old stock Fits: Dolmar 118
(1 in stock)
dolmar 118 chainsaw short circuit button with cap and nut 965 605 035 new (d-24)
Part: rubber cap, short circuit button and nut Part # 965 605 036, 965 605 035, 965 605 037 Condition: new, old stock. Rubber has a small/minor amount of dry rot Fits: Dolmar 118
(1 in stock)
dolmar 118 chainsaw crankcase half, clutch side 118 111 211 new (d-118)
Part: crank case, clutch side Part # 118111211 Condition: new, old stock Fits: Dolmar 118
dolmar 118 chainsaw air filter cover 118 118 082 new (d-118)
Part: air filter cover hood Part # 118118082 Condition: new, old stock Fits: Dolmar 118
(2 in stock)
dolmar 118 chainsaw rear trigger handle half (magneto side) 118 117 283 new (d-118)
Part: cast rear handle half, magneto side Part # 118117283 Condition: new, old stock Fits: Dolmar 118
dolmar 122s, 122sl chainsaw hand guard 965 451 450 new (d-122)
Part: hand guard handle Part # 965451450 Condition: new, old stock Fits: Sachs-Dolmar 122 s/sl
dolmar 112, 114, 117, 119, 120 chainsaw metal tank half 119 114 010 new (d-122)
Part: metal tank half Part # 119 114 010 (part of 119 114 090) Condition: new, old stock Fits: some models of Dolmar 112, 114, 117, 119, 120 chainsaw with metal tanks
dolmar 122s, 122sl chainsaw top cover hood 122 118 210 new (d-122)
Part: top cover / hood for cylinder Part # 122118210 Condition: new, old stock Fits: Sachs-Dolmar 122 s/sl
(1 in stock)
dolmar 122s, 122sl, 122 chainsaw felt ring 900 003 052 new (d-24)
Part: felt ring insert for the magneto Part # 900003052 Condition: new, old stock Fits: Sachs-Dolmar 122s, 122sl, 122, may also fit other models
(1 in stock)
dolmar 118 chainsaw countersunk screw 901 205 402 new (d-24)
Part: 5x40 countersunk screw Part # 901205402 Condition: new, old stock Fits: Sachs-Dolmar 118, may also fit other models
dolmar 118 chainsaw gasket 965 514 040 new (d-23)
Part: gasket Part # 965514040 Condition: new, old stock Fits: Sachs-Dolmar 118, may also fit other models
dolmar 122s, 122sl, 122 chainsaw crankcase gasket 965 518 010 new (d-23)
Part: crankcase gasket Part # 965518010 Condition: new, old stock Fits: Sachs-Dolmar 122, 122s/sl, may also fit other models
(1 in stock)
dolmar 118 chainsaw top wrap handle bar 965 453 450 new (d-118)
Part: top handlebar grip Part # 965453450 Condition: new, old stock Fits: Sachs-Dolmar 118
(4 in stock)
dolmar 118 chainsaw pressure ring 118 166 021 new (d-23)
Part: pressure ring Part # 118166021 Condition: new, old stock Fits: Sachs-Dolmar 118, may also fit other models