Pioneer Holiday 1100 Chainsaw Piston & Cylinder Assy
Part: piston and cylinder kit, includes the rings and pin Condition: good used/working shape. Came off a saw with good compression. Some small/minor chips on top cooling fins. Fits: Pioneer Holiday 1100
Pioneer Holiday 1073 1074 Chainsaw Oil Cap
Part Name: Pioneer Holiday 1073 1074 Oil CapDetailed Condition Description: in nice used shape, not cracked and doesn’t leak
Pioneer Chainsaw Long Screw 507 433160 NEW (bin 123)
Part Name: ScrewPart Number: 507 433160Fits the Following Models: Many pioneer chainsawsBox 123New old stock part. Has been in storage for many years so may be dusty/dirty from 25 or so years of sitting on the shelf.
Partner Saw Part # 505 265903 Ring NEW
For Partner Models Part Number: 505 26 59-03 Part Description: ring Fits the Following Models: fit some Partner models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 15
Partner S65 S-65 Clutch Mechanism-Shoes, Spring, Spider
Part Name: Clutch Mechanism-shoes, spring and carrierDetailed Condition Description: good used shape with no breaksFits the Following Models: came off a Partner S65 but also fits some other models
Partner S55 F65 7000 + Choke Link 505 269416/269311 NEW
For Partner ModelsPart Number: 505 269416/269311Part Description: choke linkFits the Following Models: Partner 7000 F65 F55A S65 S55 S50Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 11
Partner P100 P55 S65 7000 + Ignition Bracket 505 340920
Part Number: 505 34 09-20 Part Description: ignition bracket Fits the Following Models: Partner P55 P70 7000 P100 S55 S50 S65, may also fit other models Detailed Condition Description: in good used shape
Partner F55a, f65 Chainsaw Flywheel Part # 325600
Part: flywheel and starter pawls Condition: good used/working shape with no broken fins Fits: Partner F 55A, F 65 Part Number: 325600
Partner R17, S55 + Chainsaw Top Handle bar only
Part: top handle bar Part # 350184 Condition: good used/working shape-not cracked or bent-large gouges/missing sections in rubber gripping Fits: Partner R17, S55, P55, P70, may also fit other models
(3 in stock)
Partner Chainsaw Gasket PN 272085 NEW
For Partner ChainsawsPart Number: 272085Part Description: gasketFits the Following Models: fits some models of Partner chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from 30 years of storage.Location: box 6
Partner Chainsaw 500, 5000 Carb base & intake Boot
Part: carburetor base mount plate with rubber boot sleeve. Intake manifold assembly. Part # 505 27 92-34 Condition: good used/working shape Fits: Partner 500, 5000. Jonsered 490 590
Partner 7000 S55 P70 + Chainsaw Buffer 505 277230 NEW box 199
Part Number: 505 27 72-30 Part: Buffer Fits: Partner s55 s65 p55 p70 r420t r420 r421t r16 r20 r20t r21t 7000 r417 r417t r418, may also fit others Condition: new old stock part Location: Box 199
Partner 543 CS-540 Chainsaw Choke Button 506 034301 NEW
For Partner Models Part Number: 506 034301 / 506 03 43-01 Part Description: choke button Fits the Following Models: Partner 543 18” Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 25
Partner 500 5000 Oil Stop 505 397537/505 39 75-37 NEW (loc: bin 31)
For Partner ModelsPart Number: 505 397537Part Description: oil stopFits the Following Models: Partner 500 5000, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 31
Partner 500 5000 Chainsaw Spark Arrestor 505 350441 NEW
For Partner ModelsPart Number: 505 350441Part Description: spark arrestorFits the Following Models: Partner 500 5000 Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 31
Olympic 950 Chainsaw Flywheel
Part: flywheel and starter pawls Condition: good used/working shape. No broken fins Fits: Olympic / Olympyk 950 / 950 F
Olympic 264 Chainsaw Carburetor
Part: tillotson carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Olympic / Olympyk 264 F
Olympic 264 F Chainbrake Parts-Band, Spring
Part: brake band, spring and links Condition: good used/working shape Fits: Olympic/Olympyk 264 F, 350, 254f, 254 and others
Olympic 261 Chainsaw 3/8-8 Rim Drum Clutch Assembly
Part Description: good used shape, no breaks Fits the Following Models: Olympic 261, 260, 481, 281, 284, 480, 481 This is a used part.
Olympic 251, 252 Chainsaw Fuel Pump & Lines
Part: fuel pump with lines and filter. PN 80.00357, 51.00892, 50.00028, 60.00042, 50.00317 Condition: good used/working shape. Fits: Olympic / Olympyk 251, 252
Olympic 240 Chainsaw Bar Nut set
Part: set of bar nuts Condition: good used/working shape Fits: Olympic / Olympyk 240
McCulloch Titan 620 Chainsaw Clutch Nut & Washer
Part Name: clutch nut and washerFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch Titan 620 Chainsaw Bucking Spike Dawg
Part Name: bucking spike dawgFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch SP 80 Chainsaw Oil Tank Crankcase
Part Name: oil tank- crank case housing with bar stud / bolt set Condition Description: in good used/working order. Has some minor oxidation Fits the Following Models: McCulloch SP-80, Super Pro 80
McCulloch SP-80, sp-81, sp-60 Chainsaw Impulse Pulse Line
Part Name: pulse line. PN 69598 Condition: in good used/working shape Fits the Following Models: McCulloch super pro 80, 81, 60 and some others
McCulloch SP-60 SP60 Chainsaw Clutch Cover Guard
Part Name: clutch coverCondition Description: in good useable shape-chip and gouge on side edge-pointed out with arrow in pictureFits the Following Models: McCulloch SP-60This is a USED part, in good working order.
McCulloch Pro Mac 850 Chainsaw Fuel/Gas Cap
Part: fuel cap Condition: good used/working shape Fits: mcculloch pm 850
McCulloch Pro Mac 805 Chainsaw Oil Tank Crankcase
Part Name: oil tank crankcase and studsCondition Description: in good used shape-no breaks-paint scuffingFits the Following Models: McCulloch Pro Mac 805This is a USED part, in good working order.
McCulloch Pro Mac 805 Chainsaw Fuel/Gas Cap
Part Name: fuel capCondition Description: in good used shape-no leaks/cracksFits the Following Models: McCulloch Pro Mac 805This is a USED part, in good working order.
(3 in stock)
McCulloch Pro Mac 700 Chainsaw Cylinder shield cover
Part Name: Cylinder Cover Detailed Condition Description: good used/working shape with no breaks, has staining/burn marks. Fits the Following Models: McCulloch pro mac 700
McCulloch Pro Mac 610 650 + Rear Isolator/Mount Set #1
Part : rear av mount/isolator with strut, grommets and hardware Condition: good used/working shape Fits the Following Models: 605, 610, 650, 3.7 Timber bear, 3.7 eager Beaver
McCulloch Pro Mac 610 605 650 3.7 Top Handle Bar Grip and mount 91951
Part Name:top front handle bar, part #91951 with mount Detailed Condition Description:good used shape, no cracks Fits the Following Models: McCulloch Pro Mac 610 605 650 3.7 Timber Bear
McCulloch Pro Mac 555 Chainsaw Fuel Tank Trigger Handle
Part Name: bare bones fuel tankCondition Description: in good used shape-no breaks/leaks-paint loss/scuffingFits the Following Models: McCulloch PM 555This is a USED part, in good working order.
McCulloch 32cc to 38cc Chainsaw Muffler
Part: muffler. Part # 111093 Condition: good used/working shape.111093. Fits the Following Models:fits many newer McCulloch models such as: MS1435 35cc, MS1432 32cc, Mac 3200, Mac 3516
(2 in stock)
McCulloch 7-10 Chainsaw Flywheel & Starter Pawls
Part Name: flywheel with starter pawls Part Description: good used shape, no breaks Fits the Following Models: McCulloch 7-10
McCulloch Mac 3200 Chainsaw Front, Rear Trigger Handle
Part Name: front handle, rear trigger handle half (handle only does NOT include the trigger or any other parts) and housingCondition Description: good used shape, no breaksFits the Following Models: McCulloch Mac 3200
McCulloch Mac 110 120 130 EB 2.0 Yellow Starter Cover
Part Name: starter cover only-no internal parts in good used shape Fits the Following Models: McCulloch Mac 110, 120, 130, Eager Beaver 2.0-may also fit other models
(1 in stock)
McCulloch D 44 Chainsaw Air Filter Cover (Loc: old mcc bin)
Part: air filter cover Condition: usable, has heavy rust Fits: McCulloch D44 Location: old model McC bin
McCulloch 7-10 Auto Chainsaw Rim Drum Clutch Assembly
Part Name: clutch assembly-includes the drum, rim, bearing, mechanism, and nutCondition Description: in good used shape-no breaksFits the Following Models: McCulloch 7-10
(1 in stock)
McCulloch 7-10 Auto Chainsaw Choke Link
Part Name: choke link Condition: good used/working shape Fits the Following Models: McCulloch 7-10
McCulloch 10 Series Mac 10-10 flywheel for RHP
Flywheel for 10 series saw where the pull start is on the clutch side of the saw. This flywheel has no place for starter pawls because on these models the starter is on the clutch. Fits mac 10 series right hand pull models, such as older 10-10, 1-10 etc. good used/working shape
(1 in stock)
Jonsered Jonsereds 910 E EV Chainsaw Choke Link Button
Part Name: choke link/button Part Description: good used shape-no breaks Fits the Following Models: Jonsered 910 910e 910ev This is a used part.
Jonsered Jonsereds 52E, 52, 521Chainsaw black Air Box
Part: Air box. May vary slightly in cosmetic design, but will be of a functional equivalent. Condition: good used working shape Fits: Jonsered 52e, 52, 521, may also fit some other models.
Jonsered Jonsereds 451 E EV Chainsaw Clutch Cover/Side
Part: clutch/side cover-are red or red and silver in color Condition: good used/working shape-has paint loss/scuffing/minor chipping Fits: Jonsered 451 E EV
Jonsered 451e, 451ev chainsaw Air Filter #1
Part: Air filter 504 35 71-06, 504 357106 Condition: good used/working order Fits Models: Jonsered 451 e, ev
(1 in stock)
Jonsered Jonsereds 451 E EV Chainsaw Top Front Handle type 1 *for non heated handles*
Part: top handle for saws which are NOT equipped for heated handels Codnition: good used shape-not cracked or bent Fits: Jonsered 451e/451ev
(3 in stock)
Jonsered 910 E EV Chainsaw Flywheel & Starter Pawls
Flywheel with starter pawls in good used shape, no cracks or breaks. Fits 910 jonsered.
Jonsered 670 Chainsaw Right Clutch Side Crankcase case
Part Name: right side crankcase half with bar stud set Part Description: good used/working shape Fits the Following Models: Jonsered 670
Jonsered 670 Chainsaw Flywheel & Starter Pawls
Part Name: flywheel and starter pawls Condition: good used shape, no cracks or broken fins Fits the Following Models: Jonsered 670 and 625 with woodruff key flywheels.
Jonsered 49SP 49 SP, 50, 51, 52, 521 Chainsaw Carburetor Grommet
Part: Carburetor grommet Condition: good used/working shape Fits: Jonsered 49sp, 50, 51, 52 521 e ev
Jonsered 455, 535, 450 Chainsaw Top Cover
Part Name: Top Cover / engine shroud. Part # 503 11 35-01 Detailed Condition Description: good used/working shape. Has a few small chips Fits the Following Models: 455, 450, 535. May also fit other models.
Jonsered 451E 451 EV Chainsaw Heated Handles Stator
Part Name: heated handles statorPart Description: good used shape, tested and worksFits the Following Models: Jonsered 451E, 451EVThis is a used part.
(1 in stock)
Jonsered 361 Chainsaw 1/4" Clutch Spur Drum
Part Name: 1/4” pitch clutch drumPart Description: Good shape, not worn outFits the Following Models: Jonsered 361 and othersThis is a used part.
Jonsered 36 361 365 Chainsaw Fuel Oil Tank Cover Front
Part Name: Tank frontPart Description: In good shape, no cracks or holes, some wear and gouging-paint worn offFits the Following Models: Jonsered 361This is a used part.
Jonsered 2054 2055 Turbo Chainsaw Chain Catcher Stop
Part Name: chain catcher stop. Part # 503 18 35-01 Condition Description: in good used/working shape Fits the Following Models: Jonsered 2055, 2054 2051 Turbo
(3 in stock)
Jonsered 2040 Turbo Rear Throttle Trigger Handle Assy
Part Name: rear throttle trigger handle assembly-includes the trigger, safety and cable. 530 03 61-30, 530 03 64-91, 530 03 61-04, 530 03 60-97, 530 03 60-98 Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040, 2036 Turbo
Husqvarna 455 Rancher Chainsaw felt Air Filter
Part: felt air filter Part # 537 25 57-03 Condition: good used/working shape Fits: husqvarna 455, 460
Husqvarna 42 Special Chainsaw Clutch Mechanism & Washer
Part Name: clutch mechanism and washerCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
(4 in stock)
Husqvarna 40 Chainsaw Walbro Carburetor
Part: walbro carburetor Condition: good used physical shape. May or may not need a carb rebuild kit Fits: Husqvarna 40
Husqvarna 350 Chainsaw Cylinder Bolt Set of 4
Part Name: bolt set of 4Fits the Following Models: Husqvarna 350This is a USED part, in good working order.
Husqvarna 262 XPG XP Stator/Generator for Heated Handle
Under-flywheel stator for heated handles. In good working order. Fits 254 257 261 or 262 equipped with heated handles.
(1 in stock)
Husqvarna 254 Chainsaw Muffler Assembly
Part: muffler 501 79 84 01 Condition: good used/working shape-minor surface rust Fits: Husqvarna 254 50
Husqvarna 181 Chainsaw Rim Drum Clutch Assembly
Part Name: clutch assembly-includes drum, bearing, mechanism Condition Description: good used shape Fits the Following Models: Husqvarna 181 281 281xp 288xp 288 xp se This is a USED part, in good working order.
Husqvarna 136, 141, 36, 41 Chainsaw baffle plate / flywheel cover
Part Name: Flywheel Cover / baffle plate duct. Part # 530-029800 Detailed Condition Description: good used / working shape Fits the Following Models: 136, 141, 36, 41
Homelite XL-800 XL-700 Chainsaw Filter Cover w/Nut
Part Name: air filter with nut Detailed Condition Description: good used shape with no breaks, paint scuffed/worn, may be blue or red in color Fits the Following Models: Homelite XL 700 XL 800 This is a USED part, in good working order.
Homelite XL-700 XL-800 Points Ignition Coil w/Plate
Part Name: Wico Points Ignition Coil Assy Part Description: coil with the spark plug boot, lead and points Detailed Condition Description: tested and works Fits the Following Models: xl700, xl800 This is a USED part, in good working order.
Homelite XL-12 Chainsaw Red Starter Recoil Cover Assembly
Part Name: red starter cover with pulley and spring Condition Description:good used/working shape-has paint loss Fits the Following Models: Homelite XL-12
Homelite SXL, XL-12 Oil Line 59000 NEW (Bin 4)
Oil line part # 59000 New old stock part from closed out dealer Fits xl-12, super xl 12, xl-15 chainsaws
Homelite Super XL925 Oil Pump Oiler w/ Gear
Part Name: Oil Pump with Drive/Worm Gear A68265A A 68265A A 68265-A Condition: good used/working shape Fits the Following Models: Super XL-925 923 and others
Homelite Super xl 925 chainsaw oil pump
Part Name: Oil Pump oiler. Part # 63343-5 (body) A-57834-16 (plunger) 59074 (shaft) 59293 (spring) Condition: good used/working shape Fits: Homelite Super Xl 925
Homelite Super XL 12 + Chainsaw Pawl Stud PN 58757E NEW (bin 105)
For Homelite ChainsawsPart Number: 58757ePart Description: starter pawl studFits the Following Models: super xl925, super xl925w, dm40, dm401, super xl ao, xl 12, xl98a, xl98c, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from year...
Homelite Super EZ AO Starter Pawl PN 65108 NEW (HM-59)
For Homelite Chainsaws Part Description: starter pawl Part Number: 65108 Fits the Following Models: super ez ao, super ez Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: box 59
Homelite Super EZ AO Chainsaw Intake Manifold
Part Description: intake manifold Condition:nice used shape Fits the Following Models: Homelite Super EZ Auto This is a USED part, in good working order.
Homelite xl-2 chainsaw Cap & Gasket a-70445 NEW (29A)
For Homelite XL2 Chainsaws Part # :a-70446/ A 70445/ A-69277a cap w/ gasket. Red or black in color. Fits Homelite XL2/ XL 2 models and some other models New old stock part from closed out dealer Location: box 29a
(1 in stock)
Homelite Chainsaw Super XL auto O Ring 59765 NEW (bin 24)
Homelite Super XL Auto chainsaw O ring for the oil tube Part # 59765 New old stock part from closed out dealer
Homelite Chainsaw Choke Rod Button PN 572891 NEW
For Homelite Chainsaws Part Name: choke button Part Number: 572891 Part Description: choke button Fits the Following Models: super xl ao, xl 12, super 1050, super 1130G Detailed Condition Description: New old stock part. Never used. Item may be dusty from 30 years of storage. Location: B...
Homelite 150, 450 Chainsaw Check Valve Spring 68570 NEW (bin 104)
Check valve spring, part # 68570 New old stock from closed out dealer Fits the Following Models: 150 auto, super 2, 450, 450w, 450hg, 450sl, xl
Homelite 360 350 Chainsaw Red Gas/Fuel Cap
Part Name: fuel cap-red Fits the Following Models: Homelite 350 360 This is a USED part, in good working order. may or may not have keeper
Homelite 350, 360 AO Chainsaw Ignition Off Switch
Part Name: Ignition Off Switch Fits the Following Models: Homelite 350 360 Automatic This is a USED part, in good working order.
(1 in stock)
Homelite 350 360 Chainsaw Air Deflector PN A12153 used
Part: exhaust air deflector Condition: good used/working shape Fits: Homelite 350, 360
Homelite 330 Chainsaw Engine Housing Bottom Plate
Part: bottom engine housing plate. Part # 93830-2 Condition: good used/working shape Fits: Homelite 330
Homelite 300 Chainsaw Walbro Carburetor and grommet
Part: Walbro Carburetor with grommet Condition: good used, physical shape-may or may not need a car rebuild kit Fits: Homelite 300 Classic
Homelite 290 340 Chainsaw Fuel/Gas & Oil Cap Set
Part Name: Homelite 290 340 Chainsaw Fuel & Oil Cap Set Detailed Condition Description: nice used shape, not cracked and don’t leak; set of two caps, one fuel and one oil Fits the Following Models: 290 340 This is a USED part, in good working order.
Homelite 150, XL + Check Valve Ball 60051 NEW (bin 10)
Check valve ball, part # 60051 New old stock from closed out dealer Fits the Following Models: 150, super 2, xl, super 1050, super 1130g
Efco 962 Chainsaw Intake Manifold Boot
Part Name: intake manifold boot 50010026 Condition Description: in good used shape-no breaks Fits the Following Models: Efco 962, 956, 156, 165 may have clip or screw type clamp This is a USED part, in good working order.
Efco 952, 947 Chainsaw Fuel/Gas Cap
Part Name: fuel capCondition Description: in good used shape-not cracked/doesn’t leakFits the Following Models: Efco 952 and Efco 947This is a USED part, in good working order.
Echo CS-60S 60 S Chainsaw Points Ignition Coil
Part Description: ignition coil, complete ignition with all the parts that are located under the flywheel: coil, points, condensor, mounting plate and plastic cover-no bootDetailed Condition Description: tested and in working conditionFits the Following Models: Echo 60SThis is a USED part, in goo...
(2 in stock)
Echo CS-60S Chainsaw Ignition Off Switch
Part Name: Ignition Off stopper Switch. Part # 163 405-0033 0 Detailed Condition Description: good used/working order Fits the Following Models: Echo CS 60S / 60 s
Echo CS-60S Chainsaw Carburetor with bolts
Part: tillotson carburetor Detailed Condition Description: good used physical shape, may need a carb rebuild kit Fits the Following Models: Echo cs 60S /60 s
Echo CS-601S 601 S Chainsaw Gas/Fuel Cap
Part Name: fuel cap Fits the Following Models: Echo CS-601S , Echo CS-601 SVL , Echo CS-701 SVL This is a USED part, in good working order.
Echo CS-280EP 280 EP Chainsaw Air Filter
Part Name: air filterCondition Description: useable shape-no tearsFits the Following Models: Echo 280 EP-may also fit other modelsThis is a USED part, in good working order.
Echo CS 302 Chainsaw Rear Trigger Handle #3
Rear trigger handle. Includes the main handle piece with rubber gripping-does NOT include any of the trigger parts. Fits Echo 302.
Echo 6700 Chainsaw Pre-Air Filter
Part Name: – Pre filtersPart Description: – In good shapeFits the Following Models: – Echo 6700
Echo 6700 Chainsaw Bar Plates Inner and Outer Plate
Part Name: – Bar plate set. Inner and outer.Part Description: – In good shape, not worn throughFits the Following Models: – Echo 6700
Echo 451-VL & 452-VL Chain and Bar Tensioner/Adjuster
Bar tensioner assembly. Includes adjuster nut and screw. In good working order. Fits Echo 451 and 452, 452VL, 451VL.
Dolmar 122, 122s/sl chainsaw Snap Ring 14x1 929 314 100 NEW (bin 32)
For Dolmar Models Part Number: 929314100 Part Description: circlip/ snap ring 14×1 Fits the Following Models: fits Dolmar 122, 122s/sl, may also fit other models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 32
Dolmar 122, 122s/sl chainsaw Screw M6x20 991 106 205 NEW (box 28)
For Dolmar Models Part Number: 991106205 Part Description: screw M6×20 Fits the Following Models: fits Dolmar 122, 122s/sl models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 28
Dolmar 118, 122, 122s, 122sl + chainsaw Screw M5x16 990 005 165 NEW
For Dolmar Models Part Number: 990 005 165 Part Description: screw M5×16 Fits the Following Models: fits many Dolmar models, including 118, 122, 122s/sl Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 28
(1 in stock)
Dolmar DCS-340 DCS340 Radial Ring Seal 962 900 049 NEW (bin 26)
For Dolmar Models Part Number: 962 900 047, 962900047, 962 900 049, 962900049 Part Description: radial ring seal Fits the Following Models: Dolmar DCS340 330 100 102 100s 100 Super and many others Detailed Condition Description: New old stock part. Never used. Item may be dusty from years ...