husqvarna 61, 266 chainsaw muffler bracket plate (type pn 501 60 84-01)
Part: muffler attachment plate Part # 501 60 84-01 Condition: good used/working order Fits: some models of Husqvarna 61 and 266
(1 in stock)
mcculloch mini mac, mini mac 6 chainsaw clutch sprocket drum
Part: 1/4" pitch sprocket drum with bearing Condition: good used/working order Fits: McCulloch Mini Mac and Mini Mac 6
homelite c-72 chainsaw clutch / drivecase cover with chain tensioner
Part: clutch cover with tensioning screw, adjusting pin, nut Part # a-58378-1, 82219, 55613-1 Condition: good used/working order Fits: Homelite C 72
poulan 2700 to 3300 series chainsaw tank vent line with valve
Part: tank vent line and valve Condition: good used/working order Fits: Poulan 2700, 2800, 3000, 3100, 3300
mcculloch pro mac 700 chainsaw brake band and hardware kit
Part: brake band with pivot lever pin, washer, latch, pins Part # 93081, 91246, 93083, 93082 Condition: good used/working order Fits: McCulloch Pro Mac 700
husqvarna 357xp, 359 chainsaw wire harness
Part: set of wires Part # 503 89 87-01 Condition: good used/working order Fits: Husqvarna 357 xp, 359
husqvarna 357xp, 359 chainsaw fuel tank rear trigger handle assembly
Part: fuel tank with 2 av spring mounts, throttle trigger, safety interlock lever, fuel cap, fuel line. May not include chip guard. Condition: good used/working order Fits: Husqvarna 357 xp, 359
husqvarna 257, 261 chainsaw outer bucking spike
Part: outer bucking spike Part # 503 52 39-01 Condition: good used/working order Fits: Husqvarna 257 262xp 254 254xp and 261
stihl 028 chainsaw 4 bolt set for the starter cover (4 bolt type)
PART: 4 starter bolts for the cover CONDITION: good used/working order FITS: Stihl 028
echo cs-650evl chainsaw bucking spike
Part: bucking spike dawg Part # 433 020-0083 0 Condition: good used/working order Fits: Echo cs 650 evl / 650evl
mcculloch eager beaver 2.3, titan 35 and 40, power mac 380, pro mac 440 chainsaw oil pump assembly
Part: oil pump oiler assembly Condition: good used/working order Fits: McCulloch eager beaver 2.3, titan 35 and 40, power mac 380, pro mac 440 and some other models
husqvarna 445, 450, 445e, 450e chainsaw flywheel assembly
Part: flywheel and starter pawls/springs/studs Part # 544 11 18-01 Condition: good used/working order Fits: Husqvarna 445, 450, 445e, 450e
(1 in stock)
husqvarna 445, 450, 450e, 445e chainsaw top cover cylinder shroud
Part: top cover Part # 544 07 95-01 Condition: good used/working order, little melting on front edge. Has some scratches and may need some cleaning. Fits: Husqvarna 445, 450, 445e, 450e
husqvarna 445, 450 chainsaw clutch cover with brake and hand guard assembly
Part: clutch cover with brake band, spring, levers, covers, chain tensioner adjuster, hand guard, chainbrake Part # 544 09 79-01, 544 08 26-01 Condition: good used/working order Fits: Husqvarna 445, 450
(1 in stock)
husqvarna 445, 450 chainsaw fuel tank rear trigger handle kit
Part: fuel tank rear trigger handle with the fuel cap, throttle cable, 2 av spring mounts, bushing, throttle trigger, safety lever interlock, fuel line and filter, handle cover Part #s 537 43 79-01, 544 10 12-01, 544 11 12-01, 501 00 76-01, 544 09 97-01, 544 09 99-01, 544 09 98-01,544 10 00-01,...
jonsered 70e, 66e chainsaw av buffer mount for the handle bracket pn 504 12 50-12
Part: av buffer mount Part # 504 12 50-12 Condition: good used/working order Fits: Jonsereds 70 e and 66 e
mcculloch mini mac chainsaw mdc 3 carburetor
Part: mdc 7 or 3 MDC3 carburetor Condition: good used/working order. May need a carb rebuild kit Fits: McCulloch Mini Mac
dolmar 100, 102, 100s, ps-33 chainsaw fuel tank cap only
Part: fuel / gas cap only (the oring is dry rotted and needs replacement) Condition: good used/working order Fits: dolmar 100, 102, 100s, ps 33
echo cs-650evl chainsaw hand guard
Part: hand guard handle 351 826-1433 0, 35182614330 Condition: good used/working order Fits: echo cs 650 550 660 evl 660evl 550evl and some other models
homelite 3300, 3350, 3800, 20, 23, ps-33, ranger chainsaw 3/8lp-6 oregon spur sprocket drum new pn 108567 (sprkt bin 5)
Part: clutch spur sprocket drum, 3/8 LP x 6T Part # 108567, type A Condition: new Fits: Homelite 3300, 3350, 3800, 3850, 20, 23, ps-33, ranger
homelite ez-mini, super ez, vi super mini chainsaw solid state ignition coil module new replaces pn a-94111-s (hm box 201)
Part: solid state ignition coil with terminal boot and spring Replaces Part # A94111S / a 94111 s Condition: new, after-market part Fits: Homelite Super EZ, EZ-mini, VI Super mini
homelite super xl, xl-12 chainsaw complete clutch spur sprocket assembly
Part: clutch assembly, includes the spur sprocket drum, mechanism (shoes, springs, carrier, washers, nut, bearing, race Condition: good used/working order Fits: Homelite super xl, xl 12
husqvarna 44, 444 chainsaw complete clutch assembly
Part: rim sprocket drum with clutch mechanism (shoes, spring, rotor) washer and a new replacement rim .325 -7. 501 45 71-01, 503 08 87-01 Condition: good used/working shape Fits: Husqvarna 44, 444
homelite xl-2 chainsaw oil tank with cap
Part: oil tank and cap 69280 Condition: good used/working shape. This is the style with the flat top cap. Fits: Homelite XL 2, XL2
partner s50, f55 chainsaw complete starter assembly
Part: starter fan housing cover with pulley, rewind spring, clip, shield Part #s 340905, 303725, 297917, 295108, 272503 Condition: good used/ working order Fits: Partner S-50, F-55, S-55, S55, S50 55cc
partner s65, s55, p55, p70 chainsaw intake manifold and screws pn 279190
Part: intake manifold spacer with screws Part # 279190 Condition: good used/ working order Fits: Partner S-65, S-55, P-55, P-70 chainsaws
troy bilt 16", 40cc TB4016cc chainsaw complete chainbrake assembly
Part: chainbrake- includes the hand guard handle, clutch cover, brake band, spring, cover Condition: good used/ working order Fits: Troy-bilt 40cc, 16in 18" TB4016cc model TB4218 4218 tb 4018 4220 4218 MS42
stihl 029, 039 chainsaw muffler assembly with screws, cover, gasket
Part: muffler with screws / bolts, cover, exhuast gasket Condition: good used/working shape Fits: Stihl 029, 039 ms290, ms310 , ms390 , ms 390 , ms 310 , ms 290
partner p55, p70 chainsaw tillotson hs-172b carburetor
Part: tillotson HS 172b HS172b HS172 b carburetor Part # 503 218101, 505 316770 Condition: good used physical shape, may need a carb rebuild kit Fits: Partner P-55 and P-70
efco 165, 156 chainsaw complete starter recoil cover and pulley assembly new pn 5001031br (new efco bin2)
Part: starter housing cover with pulley, rewind spring, grip Part # 50010315 BR, 50010315CR Condition: new Fits: Efco 165, 156
husqvarna 61 rancher chainsaw top cover shroud
Part: top cover engine shroud Condition: good used/working condition, minor crack/melting Fits: Husqvarna 61 practica and 61 rancher
efco mt7200, mt8200 chainsaw fuel tank rear trigger handle new pn 50200068R (new efco bin)
Part: fuel tank / rear trigger handle. Bare bones except for fuel line Part # 50200068 R Condition: new Fits: Efco MT 7200 and MT 8200 Location: new efco bin
poulan 2000, 1800 chainsaw muffler assembly
Part: muffler body, baffle, cover ,screw Part # 530-023795, 530-023797, 530-023794 Condition: good used/working shape Fits: Poulan 1800 and 2000
(1 in stock)
homelite xl chainsaw muffler assembly type 3
Part: muffler with cover Condition: good used/working shape Fits: some models of homelite xl, XL2, XL-2 (this model of chainsaw came with several different types of mufflers)
jonsered 490, 590 chainsaw complete muffler assembly with bolts, bracket, (for NON heated handles)
Part: muffler with bolts / screws, front bracket plate, nuts - may not include screen Part # 505 35 04-35 , 503 22 20-01, 505 35 04-72 Condition: good used/working shape Fits: Jonsered 490, 590
jonsered 2071, 2063, 2077, 2165, 2095, 2163, 2171 turbo chainsaw chain catcher (loc:2071 bin)
Part: chain catcher stop Part # 501 68 68-01 Condition: good used/working shape Fits: Jonsered 2071, 2063, 2077, 2165, 2095, 2094, 2163, 2171 turbo and some other models
Stihl 066 Chainsaw poly flywheel
Flywheel assembly 1122 400 1217 In good used shape, no broken fins, good keyway Fits 066, 066 Mag, 066AV, MS660 etc.
jonsered 49sp chainsaw fuel tank vent line and plug
Part: tank vent plug, valve fitting and line Condition: good used/working order Fits: Jonsereds 49 sp and some other models
mcculloch sp-81,sp-70,and sp-60 chainsaw ignition coil with points and condenser
Part: ignition coil with breaker points and condenser Part # 87246, 85358, 88808 Condition: good used/working order. Tested and makes good spark Fits: McCulloch super pro 81 and 60
stihl 034 chainsaw oil pump kit complete with worm gear and line
Part: oil pump oiler with worm gear and oil hose line and pickup Part # 1125 640 3006, 1117 647 9400, 1117 640, 3800, 1125 640 7110, 1125 647 2400 Condition: good used/working order Fits: some older models of 034 036 av 034av Super (this model came with two different types of oil pumps)
stihl 034 av chainsaw crankshaft and rod
Part: crank shaft with connecting rod 1125 030 0407 Condition: good used/working order Fits: stihl 034av, 034 AV Super, 036av, 036 AV
(3 in stock)
stihl 021, 023, 025 chainsaw clutch mechanism
Part: clutch mechanism -shoes, carrier, springs Part # 1123 160 2050 Condition: good used/working order Fits: Stihl 021, 023, 025, MS210 MS230 MS250
dolmar ps-6800i, ps-6000i chainsaw filter connecting mount
Part: air filter mount / connecting muff Part # 121 171 020, 908 205 755 Condition: good used/working order Fits: Dolmar PS 6800i, 6000i
efco 165, 156, 962, 956 chainsaw hand guard handle new pn 50010126 (new efco bin)
Part: chainbrake brake handle hand guard Part # 50010126 Condition: new Fits: Efco 165, 156, 962, 956
Tsumura Replacment Sprocket Nose .325 (.050 .058 ga) 48PV82 (Tip Box 1)
Tsumura Replaceable Sprocket Nose Bar Tip .325 pitch. .050 or .058 gauge Part number 48PV82
mcculloch pro mac 10-10 chainsaw electronic ignition coil
Part: electronic ignition coil Condition: good used/working shape. Tested and works. May not include all hardware pictured. Spark plug boot may need replacing. Fits: McCulloch PM 10 10
jonsered 49sp to 521ev series and 70e, 66e chainsaw oil strainer and plug kit (49sp bin)
Part: oil plug / chain catcher with oil strainer Part #s 504 11 07-03, 504 13 15-02, 504 35 75-00, 504 35 03-00 Condition: good used/working shape Fits: Jonsereds 49sp, 50, 51, 52, 52e, 521ev, 70e, 66e
(1 in stock)
jonsered 2150 turbo chainsaw fuel tank rear trigger handle #3 with spring mounts and trigger parts
Part: fuel tank rear trigger handle with the safety lever interlock, throttle trigger, fuel line and 2 av spring mounts Part # 503 86 37-72, 503 85 45-02, 503 85 44-02, 503 57 76-02503 85 41-01 Condition: good used/working shape Fits: Jonsered 2150 2145 2141 2152 2149 Turbo and others
husqvarna 346xp chainsaw top cover shroud
Part: top cover engine shroud for saws with primer bulb 2008+ Condition: good used/working shape. Minor melting on underside. Fits: Husqvarna 346 xp, 353
mcculloch mini mac series chainsaw points and condenser set
Part: set of points and condenser Condition: good used/working shape Fits: McCulloch Mini Mac 6, Mini Mac, Mini Mac 25, Mini Mac 30, Mini Mac 35. Older model Mac 110 120 130 with points type ignition.
(2 in stock)
echo cs-360t, cs-340, cs-341, cs-330t, cs-341 chainsaw clutch mechanism
Part: clutch mechanism (shoes, spring, carrier rotor) PN A05600007 Part # A056000070 Condition: good used/working shape Fits: Echo CS 360 T and 330 T, cs-341 and some models of cs 340 and cs 341. Also fits some other Echo chainsaw models.
husqvarna 394 chainsaw intake manifold spacer kit
Part: carburetor intake manifold spacer Part # 503 47 12-01 Condition: good used/working shape Fits: Husqvarna 394xp, 394 xp
homelite xl, super 2 chainsaw clutch mechanism (3 shoe type)
Part: clutch mechanism - shoes, spring, carrier rotor Condition: good used/working shape Fits: Homelite Super 2 and XL, 200 classic, 192 and others
homelite ez chainsaw old model clutch cover
Part: clutch drivecase cover Part # 65071 Condition: good used/working order Fits: Homelite EZ older, early models
stihl 044 av chainsaw air box gasket
Part: air filter box gasket seal Part # 1124 129 0900 Condition: good used/working order Fits: Stihl 044, 046 AV MS460 MS440 and others
(4 in stock)
echo cs-360t, cs-340, cs-330t, cs-341, cs-346 chainsaw 3/8-7 clutch spur sprocket drum
Part: 3/8-7 clutch spur sprocket drum Part # 17500539132 Condition: good used/working order Fits: Echo CS 360T, 340, 341, 345, 346
stihl 031 av chainsaw lower front top handle av buffer mount
Part: annual av buffer mount Condition: good used/working order Fits: Stihl 031
pioneer p40, p50 chainsaw hardware lot for the handlebar
Part: hardware - bolts, screws and nuts for the handle bar Part # 132492, 304627 Condition: good used/working order Fits: Pioneer P-40, P-50 and some other models
olympic 251 chainsaw bar stud set
Part: set of bar studs / bolts for the crankcase Part # 50.00086 / 50-00086 005000086 Condition: good used/working shape Fits: Oleo Mac Olympyk 251 250 252 254 254f 251 Super Deluxe 264f Agristar 264
partner R16 r417, r517, r17 + chainsaw starter pawl set
Part: starter pawls / ratchets set and springs for the flywheel Part # 269145 and 295613 Condition: good used/working order Fits: Partner r417, r17, r516, r16, r20, r21, r30, r440t and other models
mcculloch mac 3216 3214, 32cc chainsaw chainbrake assembly
Part: chain brake, includes the brake hand guard lever, brake band spring, levers, and cover Condition: good used/working shape. faded Fits: McCulloch Mac 3216, 3214 32cc
husqvarna 61, 272 chainsaw brake spring and knee joint lever set (late model)
Part: brake spring, knee joint lever, and spring Part # 503 70 99-01, 501 87 53-03 Condition: good used/working shape Fits: Husqvarna 272 xp and 61 late model (newer)
roper built craftsman 3.7 chainsaw air filter cover and filter set
Part: air filter cover, knob and air filter Part # 9121H, 9166H, 9103H Condition: good usable condition Fits: Craftsman built Roper 3.7 chainsaws with model # 917.351090 and some other model #s
echo cs-650evl chainsaw starter recoil cover and pulley assembly
Part: starter recoil fan housing cover with pulley drum and rewind spring Part # 177 200-1433 0 - 101 507 1433 0, 177 206-1433 0, 177 220-0283 4 Condition: good used/working shape. Some chips etc. Fits: Echo CS 650 evl / 650evl
(1 in stock)
husqvarna 65l, 77l chainsaw handle bar av buffer mount kit
Part: av buffer mount kit for the handlebar with hardware Part # 202 44 63-45, 280 14 93-11, 501 55 76-01, 501 55 75-01, 501 55 74-01, 299 89 37-45 Condition: good used/working shape, some age to the rubber but usable Fits: Husqvarna 65 and 77 L
husqvarna 340, 346, 359 + and Jonsered 2149, 2152 + chainsaw (1) carb bolt pn 503 21 74-50
Part: (1) bolt / screw for the carburetor Part # 503 21 75 50 Condition: good used/working shape Fits: Husqvarna 340, 345, 350, 455, 346, 353, 351, 355, 357, 359 and Jonsered 2149, 2152, 2153, 2159, 2147, 241, 2145, 2150 turbo
(3 in stock)
jonsered 490 chainsaw rear trigger handle assembly
Part: rear trigger handle - includes both cast handle halves, the throttle trigger, safety interlock lever Part # 505 3413-10, 505 27 92-02, 505 27 92-30 Condition: good used/working shape Fits: Jonsered 490
poulan built craftsman 3.7 chainsaw starter cover and pulley assembly (Red)
Part: starter fan housing recoil cover with pulley and rewind spring Condition: good used/working shape Fits: Poulan 3400 built Craftsman 3.7 3.4, 18" 20"
stihl 017, 018, ms170, ms180 chainsaw fuel hose and pickup
Part: fuel hose and pickup filter Part # 1130 358 7700 Condition: good used/working shape Fits: stihl 018, 017, ms 170, ms 180
homelite super xl chainsaw complete flywheel assembly with pawls, screen for prestolite electronic systems
Part: flywheel with starter pawls, studs, spring and screen Condition: good used/working shape, has minor rust Fits: some models of Homelite Super XL chainsaws which have prestolite solid state ignition systems
craftsman 2.0, 2.1, 2.3 and poulan micro xxv chainsaw starter pulley (micro bin)
Part: starter pulley spool in good used/working shape. Fits: Craftsman 2.0, 2.1, 2.3 and Poulan Micro XXV 1800 2000 2300 models
pioneer farmsaw chainsaw decompression valve button
Part: decomp valve button and washer Part # 475322, 429702 Condition: good used/working shape Fits: Pioneer Farmsaw and some other models
husqvarna 51, 55 chainsaw air filter and base Felt, non screw type
Part: felt type which does not have the screw through the top of the air filter Condition: good used/working shape Fits: some models of Husqvarna 51, 55
husqvarna 61, 162 chainsaw brake band early/older model
Part: brake band Condition: good used/working shape Fits: some (early/older) model of Husqvarna 61, 162, 266se, 266xp
husqvarna 575xp Chainsaw gasket set 537 21 26-01 NEW
Part: gasket kit, includes the crankcase, cylinder base and muffler exhaust gasket Part # 537 21 26 01 Condition: new Fits: Husqvarna 570, 575xp xpg
husqvarna 65l and 77l chainsaw choke rod
Part: choke rod link Part # 501 21 02-01 Condition: good used/working order Fits: Husqvarna 65 L and 77 L
poulan 3400, 3700, 4000 chainsaw left rear handle half
Part: left rear trigger handle half Part # 11826 Condition: good used/working shape Fits: Poulan 3400, 3700, 4000
stihl 041 farmboss chainsaw carburetor #2 tillotson hs181c
Part: tillotson HS 181c hs181a carburetor Condition: good used physical shape, may need a carb rebuild kit. Does not include line. Fits: Stihl 041
partner p70, 7000 chainsaw oil pump kit
Part: oil pump oiler. Part #s 505 317220, 505 317164, 740 420200, 505 267261, 505 230036, 505 293130, 503 230036, 503263009, 740 420900, 505 269172 Condition: good used/working shape Fits: Partner P-70, 7000
jonsered 621 chainsaw oil pump
Part: oil pump oiler 504 81 16-01 Condition: good used/working shape Fits: Jonsereds 621
carb fuel inlet needle, replaces part #s 34-216, 82-75-7, 0018002
Part: (1) carburetor fuel inlet needle Replaces Part # tillotson 34-216, walbro 82-75-7 and zama 0018002 Condition: new, after-market part
echo cs 3000, 3400, 3450, 3500, 340, 346 + chainsaw gb 1/4" x 8 T clutch pro spur sprocket drum new (sprkt box 9)
Part: GB clutch sprocket drum - 1/4" pitch, 8T Replaces part # EC202-K8N Condition: new Fits: Echo CS-3000, cs-3400, cs-3450, cs3500, cs-340, cs-341, cs-346 Location: new sprocket box 9
(4 in stock)
dolmar 120, 119, 117 chainsaw clutch sprocket assembly
Part: clutch - includes the sprocket drum, mechanism (shoes, spring, carrier) bearing, washers and a new 3/8 - 7 replacement rim. Dolmar part numbers 119 223 100, 119 224 070 and others. Condition: good used/working shape Fits: Dolmar 120, 119, 117 and some other Dolmar models
jonsered 2054, 2055 turbo chainsaw muffler assembly type 1 503 70 90-01
Part: muffler and bracket Part # 503 70 90 01 Condition: good used/working shape, minor denting/rust Fits: some models of Jonsered 2054, 2055.
homelite cs-40, cs-50, 300 classic chainsaw muffler assembly
Part: muffler with bolts and bracket Condition: good used/working shape. Fits: Homelite CS 40, CS 50, and 300 classic
homelite super ez chainsaw Walbro HDC-2 carburetor
Part: walbro HDC2 carb Condition: good used physical condition. May need a carb rebuild kit Fits: Homelite Super EZ, super ez auto
homelite pro 4620c, 46cc chainsaw ignition coil
Part: ignition coil module Condition: good used/working shape. Tested and makes strong spark Fits:Homelite Pro 4620 C, 46cc, 45cc, Timberman 45
homelite pro 4620c, 46cc chainsaw air filter assembly
Part: air filter and base with screws Condition: good used/working shape Fits: Homelite Pro 4620 c, 46cc
husqvarna 242 chainsaw chainbrake assembly
Part: chainbrake- includes the hand guard brake lever, the clutch sprocket cover, brake band and spring. 501 79 67-05 Condition: good used/working shape Fits: Husqvarna 242, 246xp, 246 242 xp, 42 Special
homelite super xl chainsaw cylinder
Part: cylinder Part # a-69714 Condition: good used/working shape. oem. No breaks, good bore. Fits: Homelite Super XL
shindaiwa 488 chainsaw muffler assembly
Part: muffler with bolts Part # 72365-15100, 22160-15310 Condition: good used/working shape Fits: shindaiwa 488
husqvarna 42 special chainsaw ignition coil and module set
Part: SEM ignition coil and module Part # 501 81 27-01 and 501 81 28-01 Condition: good used/working shape. Tested and works Fits: Husqvarna 42 special, 242, 242xp, 246
dolmar 113, 116 chainsaw clutch sprocket assembly
Part: clutch sprocket drum - 3/8-7 with rim, bearing, washer, and mechanism (shoes, spring and carrier) Part #s 119 223 100, 010 180 011 Condition: good used/working shape. The rim is new. Fits: Dolmar 113, 116
husqvarna 45 chainsaw top cover
Part: top cover engine shroud Part # 503 10 61-03 Condition: good used/working shape Fits: husqvarna 45 40 49
jonsered 2159 turbo chainsaw fuel cap (black, part # 501 81 96-01)
Part: fuel / gas tank filler cap. may vary in comsetic style. Part # 501 81 96-01 Condition: good used/working shape Fits: some models of jonsered 2159 turbo
jonsered 451 e ev chainsaw chain tensioner adjuster
Part: chain tensioning screw and adjusting pin Part # 504 02 00-11 and 504 59 05-03 Condition: good used/working shape Fits: Jonsered 451e, 451ev
partner 5000 chainsaw muffler kit with hardware
Part: muffler with screen, bracket plate and bolts Part # 505 35 04-41, 505 35 04-72 Condition: good used/working shape Fits: Partner 5000 500
jonsered 920, 930, 820, 830 chainsaw throttle rod
Part: throttle rod link Part # 504 84 58-09 Condition: good used/working shape Fits: Jonsered 820, 830, 930, 920
(1 in stock)
jonsered 920, 930 chainsaw rear trigger handle kit
Part: rear throttle trigger handle kit - includes the 2 cast pieces, throttle trigger, safety interlock lever, and handle filler cover set Part #s 504 65 55-13, 504 84 59-06, 504 84 31-24, 504 65 55-14, 501 62 89-03 Condition: good used/working shape. some paint loss, dings and scratches and mi...