jonsered 2054 turbo chainsaw crankcase tank
Part: crank case tank with bar stud set 503 18 24-07 Condition: good used/working shape with no leaks, has some chain marks and hard crusty pitch build up on it, didn't want to use solvent because it does not leak! Fits: Jonsered 2054 2055 2051 Turbo
husqvarna 266, 61 chainsaw starter recoil cover and pulley assembly #6
Part: starter housing cover with pulley, rewind spring Condition: good used/working shape. Has some dings and stains Fits: Husqvarna 266 sp sg xp, 61 rancher practica, 266se, 266sg, 266xp,
husqvarna 254 chainsaw ignition coil
Part: ignition coil 506 02 72-02 Condition: good used/working shape. Tested and makes strong spark Fits: Husqvarna 257, 254xp, 254se, 154se, 254, 154 SE SG 154SE
husqvarna 394, 395 chainsaw muffler bracket new replaces part # 503 52 29-02 (box 526)
Part: muffler bracket, replaces HVA # 503 52 29 02 Condition: new, after-market part Fits: Husqvarna 394xp, 395xp Location: new misc. parts bin #4, box 526
homelite super ez chainsaw late model starter recoil cover and pulley assembly
Part: late model, plastic, starter housing cover with pulley, rewind spring. Condition: good used/working shape Fits: late model (newer) Homelite Super EZ
homelite chainsaw brand 14", 3/8 LP pitch chainsaw bar with safety tip new
Part: Homelite 14", 3/8 lp pitch bar and safe-T-tip A-04762, A04762 Condition: new Fits: Homelite Super 2, XL, XL-2 (after 504-2001), VI Super 2, XEL, 180, 20, 200, 205, 240, Super 240, 240 SL, 245, 255L, EL12, EL16, EL14, LX30, XLT, XL10, Bandit, Saber 31, Saber 33, Saber 35 Location: bar wall
piston ring 1.5mm x 46mm new (bin 518)
Part: Piston Ring. 1.5mmx46mm Condition: New, after-market part Location: new misc. parts bin #3, box 518
pioneer farmsaw II chainsaw fuel line, filter and connector
Part: fuel line hose (2), with fuel filter pickup, connector fitting 431537, 431268, 427888 Condition: good used/working shape with new fuel filter installed Fits: Pioneer Farmsaw II. P-42, P42, P-41, P41. May also fit other models.
(3 in stock)
husqvarna 570, 575 xp chainsaw cover buckle clip
Part: buckle clip, part # 503 85 47-01 Condition: good used/working shape Fits: Husqvarna 570, 575xp, 576xp
husqvarna 261, 262 xp chainsaw fuel tank rear trigger handle #2 (with tool compartment)
Part: fuel tank with built-in tool compartment. Condition: good used/working shape. No leaks. Fits: Husqvarna 261 262 xp, 262xp
husqvarna 480 chainsaw oil pump kit
Part: oil pump oiler with drive worm gear Condition: Good used/working shape. Has some minor chipping on oil pump housing. 501 55 82-01 Fits: Husqvarna 2100, 2101, 285, 285cd, 480 cd, 480cd
dolmar 7900 6400 chainsaw fuel line
Part: fuel line 038 114 051 Condition: good used/working shape may be green or black Fits: Dolmar 7900, 6400 630 7300 7910 7310 PS6400 PS7300 PS7310 PS7900 PS7910
mcculloch power mac 310, 320, 330, 340 chainsaw bar pad spacer
Part: bar pad spacer, PN 93148 Condition: good used/working shape Fits: McCulloch Power Mac 310, 320, 330, 340
husqvarna 340, 345, 350 chainsaw muffler backing plate
Part: mount bracket plate Condition: good used/working shape Fits: Husqvarna 340, 345, 350
mcculloch pro mac 610, 605, 650, 3.7 timber bear chainsaw carb gasket pn 91924 used
Part: carb gasket, part # 91924 Condition: good used/working shape Fits: McCulloch Pro Mac 610, 650, 605, 3.7 Timber bear, 3.7 Eager Beaver
jonsered 910 e ev chainsaw intake manifold boot
Part: intake manifold/connecting boot. PN 504 12 08-02 Condition: good used/working shape Fits: Jonsereds 910e, 910ev, 920, 810, 820, 830
husqvarna 136, 141 chainsaw carb support plate
Part: carburetor support plate, pn 530047767 / 530 04 77-67 Condition: good used/working shape Fits: Husqvarna 141, 136, 41 36, 142, 137
(1 in stock)
husqvarna 36, 41 chainsaw top wrap handle bar
Part: top front handlebar. PN 530-014290 Condition: good used/working shape Fits: Husqvarna 36, 41
husqvarna 272 xp chainsaw tillotson carburetor #1 (HS254A)
Part: tillotson HS 254a carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Husqvarna 272xp 268xp 268 xp
efco 156, 165 chainsaw fuel line pn 098000319 / 50010093 (efco bin 1)
Part: fuel line Condition: new Part # 098000319 / 50010093 Fits: Efco 156, 165 Location: Efco bin 1
mcculloch pro mac 10-10 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring, shaft and starter cover. PN 87667 Condition: good used/working shape. Oxidation on bottom of housing cover. Sawdust guard may be broken or missing. Fits: McCulloch Pro Mac 10 10, 700, 555
stihl 042, 048 av chainsaw handle support bracket
Part: handlebar support bracket/mount. PN 1117 791 1900 Condition: good used/working shape Fits: Stihl 042, 048 av
poulan 2300 av chainsaw fuel tank
Part: fuel/gas tank 530-010775 Condition: good used/working shape Fits: Poulan 2300 av
dolmar 109 tops-540 series and makita dcs 43 to 540 series chainsaw top handle bar part # 957 310 027 (plastic, newer model type)
Part: top handlebar frame only. Part # 957310027 Condition: good used/working shape Fits: Dolmar 109, 110i, 111, 115, 115i, ps-43, ps-52, ps-540 and Makita DCS 430, 431, 4300i, 520, 5200i, 43, 52, 540
dolmar 109, 111, ps540 chainsaw walbro wt 465A chainsaw carburetor
Part: Walbro WT-465A. WT46A Part # 027 151 021 Condition: good used physical shape. May need a carb rebuild kit. Fits: Dolmar PS-540, 109, 111
(2 in stock)
jonsered 2050, 2045 turbo chainsaw flywheel fan cover pn 503 62 60-01 used
Part: flywheel fan shroud cover Condition: good used/working shape Fits: jonsered 2045, 2050 turbo
pioneer 3200 + chainsaw L.H. locknut pn 427826 new (box 114)
Part: flywheel lock nut - L.H. Part # 427826 Condition: new old stock part. May be dusty/dirty from years of storage. Fits: Pioneer 3270, 3200, 3270 . May also fit other models. Location: box 114
Husqvarna 50, 51, 55 chainsaw fuel/ gas cap
Part: Fuel/ Gas Cap with keeper Condition: good used/ working order Fits: Husqvarna 50, 51, 55
husqvarna 281, 288 + chainsaw filter vent plug pn 503 60 04-01 new (box H-39)
Part: filter vent plug Part # 503 60 04 01 Condition: new old stock part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 281, 288, 3120 and some other models Location: Box H-39
husqvarna 141, 136 chainsaw choke rod
Part: choke rod. PN 530-029831 Condition: good used/working shape Fits: Husqvarna 141, 136, 137, 142
mcculloch mac 32cc to 38cc chainsaw front handle bar type 2 - with spring mount pn 322162-01
Part: handle bar. Part # MC-322162-01, MC-322166 Condition: good used/working shape Fits: Many newer McCulloch Mac 32cc to 38cc chainsaws which have spring mount type handle bars: MODEL NAME PREFIX NUMBER CHAIN SIZE MS1635AV - - 16” 35cc MS1838AV - - 18...
poulan wild thing 2375 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Poulan Wild Thing 2375
(3 in stock)
mcculloch pro mac 10-10, 700, 55 chainsaw air filter used (700 bin)
Part: air filter Condition: good used/working shape Fits: McCulloch Pro Mac 10 10, 700, 55, Super 2-10 Automatic, 6-10, 7-10
husqvarna 40, 45 chainsaw choke rod
Part: choke rod lever. 5031052-03 503 10 52-03 Condition: good used/working shape Fits: Husqvarna 40, 45, 49
poulan built craftsman 3.7 chainsaw piston and cylinder kit
Part: piston and cylinder kit, includes the piston rings. 3.7 CID model with thin rings Condition: good used/working shape. Came off a saw with good compression. Fits: Poulan built Craftsman 3.7 3.4. Poulan 3700 3400 3800
homelite 330 chainsaw bar plate set
Part: set of inner and outer bar plates Condition: good used/working shape Fits: Homelite 330
husqvarna 371, 372 chainsaw top cylinder cover #3
Part: top cylinder cover shroud Condition: good used/working shape. Plastic is faded. Fits: Husqvarna 371, 372, 365 part # 503 62 78
remington mighty mite chainsaw clutch mechanism
Part: clutch mechanism and washer. Part # 66218 (plate/shoes/spring) and 66754 Condition: good used/working shape Fits: Remington Mighty Mite
stihl 041 chainsaw old style friction shoe starter pulley and spring
Part: friction shoe starter pulley with starter rewind spring Condition: good used/working shape Fits: old style (early model) Stihl 041 chainsaws 4 ✻ 1106 195 9800 4 Notched pin 5 ✻ 1111 195 1600 1 Rewind spring 7 ✻ 1106 195 9001 2 Washer 8 ✻ 0000 958 1010 2 Washer ✻ 1106 190 4600 1 Friction sho...
stihl 021, 023, 025 chainsaw bar chain tensioner adjuster type 1
Part: chain tensioning assembly Condition: good used/working shape Fits: Stihl 021, 023, 025 Chainsaws
echo cs 602 vl chainsaw muffler assembly
Part: muffler Condition: good used/working shape Fits: Echo CS-602VL, CS-702VL, CS-702 vl, 750evl, 750-evl. John Deere 60v 70v 80ev chainsaw
roper built craftsman 3.7 chainsaw ignition coil
Part: ignition coil. Part # 808J Condition: good used shape. Tested and works with strong spark. Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
husqvarna 40, 45 chainsaw cylinder av spring mount #1 pn 506 01 47-01 used
Part: av spring mount, part # 506 01 47-01 Condition: good used/working shape Fits: Husqvarna 40, 45
roper built craftsman 3.7 chainsaw clutch sprocket assembly
Part: clutch assembly, includes the rim sprocket / drum, the clutch mechanism, the bearing, and washer Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
jonsered 70e chainsaw rear trigger handle bottom
Part: rear handle bottom casing, both halves. 504 65 58-07, 504 655807, 504655807, 504 65 57-07, 504655707, 504 655707 Condition: good used/working shape Fits: Jonsered 70 E, 66e 66 70e
jonsered 630 chainsaw tillotson hs 218a carburetor
Part: Tillotson HS218A Condition: good used physical shape, may or may not need a carb rebuild kit Fits: some models of Jonsered 630
roper built craftsman 3.7 chainsaw throttle trigger lever #2
Part: throttle trigger lever. PN 9118H1 Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
jonsered 2171, 2071, 2165 turbo chainsaw oil pump
Part: oil pump oiler Condition: good used/working shape Fits: Jonsered 2171, 2071, 2165 Turbo
stihl 031 av chainsaw carburetor air box
Part: carb box cover, part # 1113 141 0400 Condition: good used/working shape Fits: stihl 031 AV
husqvarna 340 - 353 chainsaw choke rod 503 86 96-01 new (bin h-18)
Part: choke rod control Part # 503 86 96 01 Condition: New Fits: Husqvarna 340, 345, 346, 350, 351, 346xp, 353. Jonsered 2140 2145 2150 2149 2152 Turbo Location: Husky bin h-18
Husqvarna 51-257 Chainsaw spring NEW 503 08 46-01 (bin h-18)
Part: throttle spring Part # 503 08 46 01 Condition: New old stock OEM part. Fits: Husqvarna 238, 51, 55, 242, 254, 257 Location: Husky bin h-18
husqvarna 262 chainsaw clutch spring pn 503 57 74-01 new (bin h-11)
Part: clutch spring Part # 503 57 74 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 262, 262xp, 262 xp
husqvarna 181 chainsaw throttle trigger pn 501 80 55-01 new (N-002)
throttle trigger Part # 501805501/ 501-805501 New old stock OEM part Fits Husqvarna 181
husqvarna 346 + chainsaw chain catcher pn 503 88 63-01 new bin h-50
Part: chain catcher Part # 503 88 63 01 Condition: New old stock OEM part, may be dusty, dirty, have minor oxidation from years of storage Fits: Husqvarna 346, 351, 346xp, 353. Redmax G5300. Jonsered 2149 2152 2153 Turbo. And others. Location: Bin-50
husqvarna 61, 268 + chainsaw gasket pn 501 29 64-02 new bin h-50
Part: gasket Part # 501 29 64 02, 501296402, 501 29 64-01, 501296401, 501 29 64-03, 501296403 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61, 268, 272, 181, 288, 2100, 285cd 2100cd 266se 266xp and many others with Tillotson HS c...
husqvarna 44, 444, 281 + chainsaw brake nut pn 501 83 10-01 new (Loc: H-15)
Part: brake nut Part # 501 83 10 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 181, 61, 266, 281, 44, 444, may also fit other models Location: Bin H-15
husqvarna 395, 365 + chainsaw lever connector pn 503 68 41-01 new box h-12
Part: connector lever. Black or white in color. Part Number: 503 68 41-01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 395, 365, 362, 385, 372 and some other models Location: Box H-12
husqvarna 266, 61 + chainsaw carburetor sleeve pn 501 28 92-01 new box h-12
Part: carb sleeve Part Number: 501 28 92 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61, 1100, 266, 480, 263 cd, 162 Location: Box H-12
husqvarna 51, 55 chainsaw starter pulley pn 505 30 37-35 new box h-12
Part: starter pulley Part Number: 505 30 37-35 Condition: new aftermarket part Fits: Husqvarna 51, 55, may also fit other models Location: Box H-12
stihl 044 av, ms 440, 046 av chainsaw large buffer plug
Part: (1) buffer plug cap 1125 791 7306 Condition: good used/working shape Fits: Stihl 044 av ,MS440, 046 av, ms460 066 064
(2 in stock)
stihl 044 av chainsaw flywheel pn 1128 400 1200b
Part: flywheel,. part # 1128 400 1200 B Condition: good used/working shape, no broken fins Fits: Stihl 044 av, may also fit Stihl MS 440
stihl ms 441 chainsaw air filter nut
Part: air filter slotted nut 1138 140 9500 Condition: good used/working shape Fits: Stihl MS441
Stihl ms 441 chainsaw crankshaft, rod and bearings
Part: crank shaft with connecting rod and bearings part numbers: 1138 030 0406, 9503 003 0355, 9523 003 4278 Condition: good used/working shape Fits: Stihl MS441
stihl ms 441 chainsaw muffler assembly
Part: muffler 1138 140 0651 Condition: good used/working shape some minor denting/dings and also surface rust present, may not be muffler pictured Fits: Stihl MS441
husqvarna 40, 45 chainsaw gas tank cap
Part: fuel tank cap 506 02 75-05 Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 254, 257, 261, 262 xp chainsaw air duct jet
Part: air duct. part # 503 54 23-01 Condition: good used, working shape Fits: Husqvarna 254, 257, 261, 262xp, 254xp
Stihl 041 AV Chainsaw Late Model Starter Recoil Cover and Fuel Tank Assembly
Part: starter cover / fuel tank assembly with spring and plastic pawl type starter mechanism and pulley. May not include grip. 1110 080 2815, 1117 195 0401, 1110 084 1000 Condition: In good used shape Fits: Stihl 041AV, 041 Farmboss
mcculloc pro mac 10-10 chainsaw walbro sdc carburetor type 1
Part: walbro sdc 44a SDC44 carburetor Condition: good used physical condition, may or may not need a carb rebuild kit Fits: McCulloch Pro Mac 10-10, Pro Mac 55 700 and others
echo cs 500 vl chainsaw intake manifold adapter boot kit
Part: intake manifold boot. PN 130 508-1233 1, 13050812331 Condition: good used/working shape Fits: Echo cs-500vl 510EVL 550EVL, CS510EVL, CS550EVL, CS510, CS550 EVL, John Deere 55sv, 55 sva
mcculloch power mac 310, 320, 330, 340 chainsaw brake spring
Part: compression brake spring. Part # 94007 Condition: good used/working shape Fits: McCulloch Power Mac 310, 320, 330, 340
poulan xx 20 chainsaw throttle link
Part: throttle link 23506 Condition: good used/working shape Fits: Poulan XX20, sears craftsman 1.9
dolmar 109 110 111 115 chainsaw outer bar plate
Part: outer bar plate 027 111 041 Condition: good used/working shape Fits: Dolmar 109, 110, 111, 115, PS540, PS-540, 115i, 111i
mcculloch mac 120, 110, 130 chainsaw shortblock-piston, cylinder, crankshaft
Part: crankshaft-piston, cylinder, crank shaft, rod, engine pan, bar mounting bolt. Part #s 94662, 214157, 217029 Condition: good used/working shape-came off a saw with good compression, no breaks. Fits: McCulloch Mac 120, 110, 130
homelite super xl, xl-12, 360 chainsaw check valve repair kit pn 93910-A new box 111
Part: check valve repair kit Part Number: 93910A Condition: new old stock part-may be dusty/dirty/have minor rust from years of storage Fits: Homelite Super XL, XL-12, 360 Location: Box 111
(1 in stock)
Homelite Super XL Chainsaw Choke Rod (metal)
Part: metal choke rod, (type 2, metal) Condition: Good used/working shape Fits: Homelite Super XL, XL-12
Stihl 015 AV Chainsaw orange Air Filter Cover
Part: Air filter cover Condition: good used/working shape Fits: Stihl 015 AV
Lombard Comango, AP42, AL42 fuel cap #1 with O ring
Part: fuel / gas cap with O ring. Does NOT includes the vent/duckbill valve Condition: good used/working shape. Fits: Lombard Comango, AP-42, AL-42
McCulloch 250 Chainsaw Oil Cap
Part: Oil cap 57129a, 57129 a Condition: Good used/working shape Fits: McCulloch 250 300 200 1-42 1-51 1-53 450 550 and many others
(1 in stock)
jonsered 2051, 2054, 2055 turbo chainsaw ignition off switch and wires #1
Part: ignition off switch with wires 503 19 87-01 Condition: good used/working shape Fits: Jonsered 2051/2054/2055 turbo
(1 in stock)
stihl 045 056 chainsaw intake manifold boot
Part: intake manifold boot Condition: good used/working shape Fits: Stihl 045/056
Poulan Pro 4218 Chainsaw Clutch Side Cover w/ Chain Tensioner
Part: clutch side cover with chain tensioner Condition: Good used/working shape Fits: Poulan Pro 4218 4018 3516
jonsered 90 chainsaw air filter cover
Part: air filter cover. Part # 504 60 20-17 Condition: good used/working shape Fits: Jonsered , 90, 801
Husqvarna 61, 266, 162 Chainsaw Idle Speed Screw
Part: Idle speed screw Condition: Good used/working shape Fits: Husqvarna 61, 266, 162
Husqvarna 181 281 288 Chainsaw Starter Pawl and Spring
Part: Starter pawl and spring (Includes 1 pawl and spring, not a set). 501 67 32-01, 501 67 35-01 Condition: Good used/working shape Fits: Husqvarna 181/281/288 288xp 181se 288 XP lite 44 444 Practica, 61 266 268 272 272xp 266xp 266se 394 395 394xp 395xp
Stihl 038 Chainsaw Clutch Assembly type 1
Part: Clutch assembly. Includes drum, mechanism, washers, clip and NEW 3/8-7 rim. Condition: Good used/working shape Fits: Stihl 038AV, 038 AV Super, 038 AV Magnum
mcculloch double eagle 50 chainsaw pawl plate 217893 new box 13
Part: pawl plate Part Number: 217893 Condition: new old stock part-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: McCulloch Double Eagle 50 Location: Box 13
Husqvarna 154 Chainsaw Starter Recoil and Pulley Assembly
Part: Starter/Recoil and Pulley Assembly 501 86 72-02 Condition: good used/working condition - some cosmetic wear and tear. Fits: Husqvarna 154se, 154sg 154 se sg 254se 254 se sg
Craftsman 2.3 Chainsaw Fuel / gas Tank
Part: Fuel tank 25143, 530025143, 530-025143, 530010772, 530-010772 10772 Condition: Good used/working condition with no breaks or leaks Fits: Craftsman 2.3 and others
stihl 020avp chainsaw top wrap handle bar
Part: metal top handle 1114 790 1715 Condition: good used/working shape-not cracked or bent Fits: Stihl 020 AVP
pioneer p-50 chainsaw top front handle bar
Part: handle bar. Part # 475202 Condition: good used/working shape-not cracked or bent. Some of rubber gripping is torn off / missing Fits: Pioneer P50
(4 in stock)
poulan 2150 chainsaw starter recoil cover assembly
Part: starter cover with pulley, spring-does NOT include the pulley grip Condition: good used/working shape Fits: Poulan 2150, 2050, 1975, 2075 chainsaws
husqvarna 359 chainsaw starter/recoil cover assembly
Part: starter cover with pulley, spring and pulley grip Condition: good used/working shape. Has dings and scratches and decal may not be complete. Fits: came off a Husky 359 will fit 357 357xp
husqvarna 359, 357 xp chainsaw chain catcher
Part: chain catcher. PN Condition: good used/working shape-has some minor dings Fits: Husqvarna 359, 357 XP
husqvarna 141, 136 chainsaw air filter top with screws
Part: air filter top with screws. Part # 530-029811. Condition: good used/working shape Fits: Husqvarna 141. 136
Stihl 038 AV Chainsaw Inner Bar Plate
Part: inner bar plate 1117 664 1000 Condition: good used/working shape Fits: Stihl 038 042 048 AV 042av 038av 038 Magnum 048ave Chainsaw
McCulloch mac 32cc to 38cc Chainsaw Throttle Lock safety Latch MC-224822 used
Part: safety throttle latch, part #MC 224822 Condition: good used/working shape Fits: many newer McCulloch mac 32cc to 38cc models such as: MS1635AV - - 16” 35cc MS1838AV - - 18” 38cc EAGER BEAVER 2116 11-/21- 600035-08 16” 35cc EAGER BEAVER 2116 11-/21- 600035-14 16” 35cc EAGER BEAVER 21...
McCulloch mac 32cc to 38cc chainsawThrottle Trigger used
Part: throttle trigger, part # 224821 Condition: good used/working shape Fits: many newer McCulloch Mac models such as: 3200 MS1635AV - - 16” 35cc MS1838AV - - 18” 38cc EAGER BEAVER 2116 11-/21- 600035-08 16” 35cc EAGER BEAVER 2116 11-/21- 600035-14 16” 35cc EAGER BEAVER 2116 11- 600035-20 16” 35...
Husqvarna 281, 288, 181 Chainsaw Oil Pump Oiler with Line & Gear
Part: oil pump with oil line/filter and gear Condition: good used/working shape Fits: Husqvarna 281, 288, 181
Stihl 038 AV Chainsaw Gas/Fuel Cap
Part: fuel/gas tank filler cap 0000 350 0510 (old style) Condition: good used/working shape. May not have keeper Fits: early model (older) stihl 038 av chainsaws