(3 in stock)
25" .404 .063 GB Pro Top Chainsaw bar for Large Stihl Saws 050 - 084 #2
Professional replaceable tip bar. .063ga .404 Pitch. 25", 84 drive link New old stock Has some surface rust/paint chipping from years of storage. Fits the extra large Stihl mount: 050, 051, 075, 076, 070, 084, 08S and Echo CS1100
(1 in stock)
roper built craftsman 3.7 chainsaw clutch cover for model # 917.353760 (early model,black)
Part: clutch cover/chain shield does not include actuating arm/knob mechanism. Condition: good used/working shape Fits: roper built craftsman 3.7 models with models #S 917.353760, 917.35761 and some others
Mcculloch Power Mac 310 chainsaw lot of assorted hardware #1
Lot includes all in picture. Good working shape. Fits Power Mac 310
(1 in stock)
Mcculloch Power Mac 310 coil spacer 214356
Part: coil spacer Part number: 214356 condition: good used shape Fits: Power Mac 310
(1 in stock)
Husqvarna 435 chainsaw clutch parts
Part: clutch parts, includes everything pictured Condtion: good used shape Fits: Husqvarna 435 435 e 435e
Husqvarna 435 435 e chainsaw inlet pipe assembly
Part: insulation wall plastic, inlet pipe, intake manifold base Part numbers: 504 72 44-01, 504 20 12-01 Condition: used part, good working shape Fits: Husqvarna 435 435e
Husqvarna 435 chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs Condition: good used/working order Fits: Husqvarna 435 435e
(1 in stock)
Husqvarna 435 chainsaw handle bar hardware kit #1
Part: handlebar hardware kit Condition: good used/working order Fits: Husqvarna 435, 435e
Husqvarna 435 e chainsaw clutch spur sprocket
Part: .325 - 7 clutch spur sprocket drum Part number: 504 71 24-02 Condition: Good Used Fits: Husqvarna 435 435e
(1 in stock)
Husqvarna 435 Hose, airpurge suction line 544 40 19-01
Part: line Part number: 544 40 19-01 condition: used, good shape Fits: 435 435e
(2 in stock)
Husqvarna 435 chainsaw muffler kit
Part: muffler, heat shield and exhaust gasket Part # 544 14 77-02 Condition: good used/working order Fits: Husqvarna 435
(2 in stock)
Husqvarna 435 e Chainsaw Flywheel Cover Air Baffle
Part Name: air baffle, flywheel cover shroud. 544 19 71-02 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 435 435e This is a USED part, in good working order.
Husqvarna 435 e chainsaw muffler heat shield
Part: muffler heat shield deflector part number: 501 32 31-01 Condition: good used/working shape Fits: husqvarna 435 e 435e
Husqvarna 435 chainsaw ignition coil
Part: ignition coil module 573 93 57-01 573 93 57 01 Condition: good used/working order. Tested and works with good spark Fits: Husqvarna 435
jonsered cs2245, cs2245 s, cs2250 s chainsaw muffler
Part: muffler Part # 544 14 77-02 Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s, Husqvarna 435
Husqvarna air filter for 435 chainsaws 544 80 54 03
Air filter Part # 544 80 54-03, 544805403 Condition: good used shape Fits Husqvarna 435, 435E and 440 Chainsaws
(1 in stock)
Homelite 192 Classic chainsaw lot of misc. hardware #1
Part: lot of assorted hardware - screws, bolts off of a Homelite 192 Classic Condition: good used/working order
(1 in stock)
homelite 192 chainsaw engine housing case and rear handle #1
Part: engine housing/rear trigger handle-bare bones Condition: good usable shape-has a small burned/melted spot Fits: Homelite 192 classic
(1 in stock)
Homelite 192 classic chainsaw oil tank
Part: oil tank Condition: good used/working shape-no leaks Fits: Homelite 192 classic
Homelite 192 Classic chainsaw guide bar plate
Part: guide bar plate Part number: 69360A 69360 A Condition: good used/working shape Fits: Homelite 192 Classic
(1 in stock)
Homelite 192 Classic chainsaw muffler assembly
Part: exhaust muffler Condition: good used/working order may vary cosmetically Fits: Homelite 192 Classic
(1 in stock)
Homelite 192 Classic chainsaw clutch 6 spur sprocket assembly
Part: clutch assembly- includes the 6T spur sprocket drum with clutch mechanism (shoes, springs, carrier) washer, bearing. Condition: good used/working order Fits: Homelite 192 Classic
(1 in stock)
Homelite 192 Classic Chainsaw Bar Chain Tensioner Adjuster
Part Name: chain tensioning screw and bar adjusting pin Condition: good used/working shape Fits : Homelite 192 Classic
(1 in stock)
Mcculloch pro mac 510 chainsaw link mount kit with grommet
Part: link mount (93031) with grommet and all parts pictured Condition: good used/working shape Fits: McCulloch Pro Mac 510
(1 in stock)
Mcculloch Pro Mac 510 chainsaw set of cylinder head bolts
Part: cylinder head bolt - set of 4 Condition: good used/working shape Fits: McCulloch Pro Mac 510
(1 in stock)
Mcculloch pro mac 510 chainsaw trigger release 91504
Part: trigger release latch Part Number: 91504 Fits: Pro Mac 510-may also fit other models Condition: used. good shape
(1 in stock)
Mcculloch pro mac 510, mini mac chainsaw adjusting screw and nut
Part: bar adjusting screw and nut Condition: used, good shape Fits: McCulloch Pro Mac 510, Mini Mac, Mac 140 and some other models
(1 in stock)
Mcculloch pro mac 510 chainsaw fuel and oil tank cover #2
Part: fuel and oil tank cover, part # 92863 Condition: good used/working shape Fits: mcculloch pro mac 510
(1 in stock)
Jonsered 451 assorted hardware #2
Lot of assorted hardware for a Jonsered 451e 451ev. Includes all pictured. Good used shape.
(1 in stock)
Jonsered 451 e assorted hardware #1
Lot of assorted hardware for a Jonsered 451e 451ev. Includes all pictured. Good used shape.
(1 in stock)
Jonsered 451 ev chainsaw crankcase half- right side
Part: crankcase housing half - right side Condition: good used/working shape Fits: jonsereds 451ev
Homelite 550 chainsaw oil pump parts used
Used oiler parts. Includes items pictured. cover, screws, springs, body, check valve ball, plunger. gaskets, (one has tear in it but may still be usable)
Homelite chainsaw 23" track hardened bar with 1/2" pitch chain
Good used condition, with some corrosion present. .063 gauge a-55723 Fits: 5-20 and other antique homelite saws.
Husqvarna 575 xp, 570 576xp chainsaw top cover shroud type 2 (HD type) #2
Part: top cover / engine shroud for hd Condition: good used/working shape. Has a couple of minor cracks and resin build up. Fits: Husqvarna 575xp, 570 , 576 xp
Jonsered 2083 II chainsaw crankcase half - right clutch side with bar stud set #2
Part: right, clutch side of the crank case housing with bar stud / bolt set Condition: good used/working shape. Has some minor oxidation/pitting and a chip at the bottom. Fits: Jonsered 2083 II Turbo
(1 in stock)
Jonsered 2083 II chainsaw crankcase half - left flywheel side #2
Part: left, flywheel side of the crank case housing Condition: good used/working shape. Has some minor oxidation/pitting and a crack at the top. Still quite functional. Fits: Jonsered 2083 II Turbo
(1 in stock)
Jonsered 2083 II chainsaw fuel tank rear trigger handle housing #2
Part: fuel tank rear handle housing: throttle trigger (no interlock), 1 handle cover, 3 av mounts and gas cap. Has crack by the switch opening and shows signs of wear. Condition: good used/working order. Fits: Jonsered 2077 2083 II Turbo
(1 in stock)
Jonsered 2083 turbo chainsaw case bolt set
Part: set of bolts for the case Condition: good used/working shape Fits: Jonsered 2083 turbo
(1 in stock)
Jonsered 2040 phelon flywheel and starter pawls
Part: phelon flywheel and starter pawls. Condition: good used/working shape, no broken fins Fits: Husqvarna 36 41 Jonsered 2040 2036
(1 in stock)
Jonsered 2040 Turbo Rear Handle
Part Name: rear throttle trigger handle - handle only Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040, 2036 Turbo
Dolmar 123 Chainsaw Fuel Line, Suction, Head, Valve
Part Name: fuel line, suction line and valve hose. 965451191, 965452485, 965 451 191, 965 452 485 Condition Description: in good used shape-no breaks Fits the Following Models: Dolmar 123, 133, 133 super, 143, 343 309
Dolmar 123 - 153 Chainsaw Oil Cap 965 451 380
Oil tank filler plug. 965451380 good used condition Fits 123 133 133s 133 Super 153
Dolmar 133s, 143 chainsaw muffler body
Part: muffler body Condition: good used/working shape Fits: Dolmar 133 Super, 143
Mcculloch pro mac 10-10 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware (includes everything pictured) Condition: good used/working order Fits: McCulloch Pro Mac 10 10
Mcculloch Pro Mac 10-10 Chainsaw Air Filter Cover Knob
Air filter cover knob In good used shape Fits Mcculloch Pro Mac 10-10
Mcculloch Pro Mac 10-10 Chainsaw Compression Release Valve
Decompression valve - fits Mcculloch Pro Mac 10-10 Good used working order
(1 in stock)
Husqvarna 55 Chainsaw Starter Spring OEM 501 76 31-01 NEW (Misc 1Q)
Starter recoil rewind spring. Husqvarna part number: 501 76 31-01, 501763101 New Fits Husqvarna 50 51 55, 55 Rancher, 335, 338 xpt and others
Mcculloch pro mac 10-10 chainsaw crankshaft, connecting rod, and bearings type 1
Part: crank shaft, connection rod with bearings Condition: good used/working shape Fits: McCulloch Pro Mac 10-10
Dolmar 111 Chainsaw Top Cover Shroud
Part Name: top cover and shroud pn#020 118 100, 020118100 For old style Dolmar 111 with one attachment for chainbrake Detailed Condition Description: good used shape with no breaks, has some scuffing Fits the Following Models: Dolmar 111
Dolmar 111 chainsaw air filter cover
Part: air filter cover hood Part # 020 118 110 Condition: good used/working shape Fits: Dolmar 111 and many others in the series 109, 110i, 111, 115, 115i, ps-43, ps-52, ps-540 and Makita DCS 43, 430, 431, 4300i, 52, 520, 5200i, ps540
(2 in stock)
Dolmar 111 chainsaw top wrap handle bar (metal, older type)
Part: top wrap handlebar Condition: good used/working shape Fits: older (early) models of Dolmar 111 and many others which have the metal handles
(1 in stock)
Dolmar 109 110 111 115 Chainsaw Clamp 001 142 012
For Dolmar Models Part Number: 001 142 012 Part Description: clamp Fits the Following Models: Dolmar 109 110 111 115 Detailed Condition Description: good used shape
(1 in stock)
Dolmar 111 chainsaw crankshaft and rod
Part: crank shaft with connecting rod Condition: good used/working shape Fits: dolmar 111 and others
(1 in stock)
Dolmar 111 Chainsaw Flywheel Side Case Half
Flywheel side crankcase half. In good used shape Fits Dolmar 111 and others
Dolmar 111 Chainsaw Clutch Side Case Half
Clutch crank case crankcase clutch half with bearing and studs In good used shape Fits 111 and others
Dolmar 111 chainsaw fuel tank rear trigger handle
Part: fuel tank with trigger and interlock 020114031 020 114 031 Fits: Dolmar 111 and some other models Condition: good used/working shape. No leaks.
Husqvarna 61, 266 + chainsaw carburetor gasket
Part: gasket Condition: good used shape Fits: Husqvarna 61, 266
Partner R16 Chainsaw flywheel pawl spring
flywheel pawl starter spring Used working condition Fits Partner: R16 and others
Dolmar 116 chainsaw throttle link
Part: throttle link linkage and slide piece 119 117 012 Condition: good used/working shape Fits: Dolmar 116
(1 in stock)
Partner r16/r20/r21 chainsaw flywheel PN 325245
Part: flywheel Condition: good used/working shape Fits: Partner R16, R20, R21 R21T, R20T Part Number: 325245
(1 in stock)
Husqvarna 61, 480, 180 s chainsaw intake gasket pn 501 25 10-01
Part: intake gasket Part # 501 25 10 01 Condition: good used shape Fits: Husqvarna 61, 480, 180 s
Husqvarna 61 - 162se chainsaw small fine machine thread av buffer mount for metal tank 501 53 05-01
Part: small rubber machine thread av buffer mount absorber / antivibe element for models that have metal tanks Part # 501 53 05 01 Condition: good used shape Fits: Husqvarna 162, 61 Rancher Practica, 162se 162sg, Practica 40, 140, 240 s, 240s, 44, 444 and other older models which have metal tan...
(1 in stock)
Husqvarna 162se Chainsaw Idle Speed Screw
Part: Idle speed screw Condition: Good used/working shape Fits: Husqvarna 162se
Stihl 066 chainsaw carburetor housing box
Part: carb housing box Part number: 1122 121 0101 Condition: good used/working order Fits: some 066 models
(1 in stock)
Husqvarna 42 Special Chainsaw Pre Filter
Part: pre air filter Part # 501 62 95-01 Condition: good used/working shape Fits: Husqvarna 42 Special
(2 in stock)
Husqvarna 42 chainsaw crankcase half - right side
Part: crank case housing half, right side 501 62 06-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
(4 in stock)
Husqvarna air filter for 435 chainsaws New 544 80 54 03 (Misc 515)
Air filter Part # 544 80 54-03, 544805403 New aftermarket part Fits Husqvarna 435, 435E and 440 Chainsaws
(1 in stock)
Husqvarna 371, 372, 365, 362 chainsaw air filter cover new (bulky-1001 bin)
Part: air filter cover - standard size Part # 503 62 80 01 503 62 80-01 Condition: new aftermarket part Fits : Husqvarna 371xp, 362, 365 Location: Bulky 1001 bin
(1 in stock)
Jonsered 451 E EV Chainsaw Bar Stud Set
Set of two bar studs. 504 02 49 02 In good used shape. Fits Jonsered 451E 451EV
(1 in stock)
Jonsered 451 E EV chainsaw cylinder head bolt set of 4
Part: set of 4 cylinder bolts Condition: good used/working shape Fits: Jonsered 451E 451EV
Jonsered 451 E EV chainsaw pulley grip handle
Part: pulley grip Condition: good used/working shape Fits: Jonsered 451E 451EV and some other models
Jonsered Jonsereds 451 E EV Drum Clutch Assembly
Part: clutch assembly-includes the drum/sprocket, mechanism, and bearing. Does not include the rim Condition: good used/working shape Fits: Jonsered 451e/451ev
Jonsered 451 E EV chainsaw top cover shroud type 3
Part: top cover shroud Condition: good used/working shape Fits: some Jonsered 451 E EV 451e 451ev
(1 in stock)
Jonsered 451E Chainsaw Throttle Trigger Assembly
Throttle trigger with return spring, safety interlock and throttle rod link 504 54 87-01 In good used shape Jonsereds 451e 451ev 451 e ev
Jonsered 490, 590 chainsaw muffler assembly 504 35 04-35 new oem (N-005)
muffler Jonsereds part # 504350435/ 504-350435 New old stock part from closed out dealer Fits Jonsereds 490, 590 models
Lombard comango chainsaw connecting rod New (Lomb bin)
Part: connecting rod 5-2006-1 Condition: New, old dealer stock. This is dusty from years of storage Fits: Lombard Comango
Chainsaw Starter Rewind Spring NEW Fits Homelite XL12 Chainsaws (HM 152)
Starter recoil rewind spring fits the following Homelite chainsaws: Super XL-12, XL 12, Super XL Auto, SXL AO, Super XL Automatic, XL-15. Also fits Lombard: Comango, Lightning I-V, AL-42, AL-51 New aftermarket part from old dealer. For Homelite replaces part number: 58764-A. For Lombard replaces...
(4 in stock)
New PM Canadien 340 bar oil tank and rear handle assembly (PMC)
Very rare vintage PM Canadien 340 bar oil tank and rear handle assembly. These are NEW, from an old dealer. They have been stored for many years, and have some dust/chips in paint/marks from storage. Fits: PM Canadien 340 Power Machinery and skil 1631
(1 in stock)
PM Canadien skil 177 chainsaw Windsor .404"-7t spur sprocket drum and bearing new (WSS)
Part: Windsor .404" pitch x 7T spur sprocket drum and bearing for the clutch PM 61 B7 Condition: new, old dealer stock Fits: Skil PM Canadien 177 and some others
PM Canadien skil 340 chainsaw .3/8"-7t spur sprocket drum and bearing new (WSS)
Part: 3/8" pitch x 7T spur sprocket drum and bearing Part number: N216A7, N216-A7 Condition: new, old dealer stock Fits: some models of Skil Canadien 330, 335, 340B, 1630, 1644, 1645
(2 in stock)
Homelite 550 Ignition Switch
Part: Ignition Off Switch Condition: Good used/working condition Fits: Homelite 450, 550
Homelite 550 Hardware Kit
Part: lot of misc. hardware, screws Condition: good used/working shape Fits: Homelite 550, 450
Lombard comango, ap-42, al-42 chainsaw clutch sprocket and bearing LO 73 A7 (spur type) (WSS)
Part: Windsor clutch spur sprocket drum and bearing Part number: LO 73-A7 Condition: New, old dealer stock Fits: SOME Lombard Comango, AP-42 & AL-42
Windsor spur type Clutch Sprocket JO 96 A7 for Jobu L6 chainsaw NEW (WSS)
Spur style clutch drim Part number: JO 96 A7 New from old dealer stock Fits Jobu M5, L6
(1 in stock)
Clutch sprocket drum with rim for Partner p85 chainsaw New (WSS)
Part: clutch rim sprocket drum .404" pitch 7 tooth Part number: 19269R Condition: New, old dealer stock Fits: Partner R-30 R30, R35 R-35
Windsor clutch sprocket drum for Partner Chainsaw PA 114 A7 NEW (WSS)
Windsor spur sprocket drum 3/8" 7 T and bearing Part number: PA114-A7, PA 114-A7 New, old dealer stock. Fits: Partner R30 R 30 P-85
(3 in stock)
Windsor spur sprocket for Partner R14 Chainsaw NEW (WSS)
Windsor spur sprocket 3/8" 8T Part number: PA 112A8, PA112-A8 New, old dealer stock Fits: Partner R14 R-14 R 14
Homelite 550 chainsaw Flywheel with pawls
Part Name: Flywheel rotor 70924 Part Description: good used shape, no breaks Fits the Following Models: Homelite 550
PM Canadien skil 177, 187 chainsaw Windsor .3/8"-8t spur sprocket drum and bearing new (WSS)
Part: Windsor 3/8" pitch x 8T spur sprocket drum and bearing for the clutch Condition: new, old dealer stock Fits: some models of Skil Canadien 175, 177, 187, 360pb, 350, 360, 1660, 1661
(4 in stock)
Windsor sprocket drum for Lombard Comango AL42 3/8" 7T New LO 74 A7 (WSS)
Part: spur type sprocket drum 3/8" 7T Part number: LO 74 A7, LO74A7 Condition: new, old dealer stock Fits: Lombard Comango, AP-42 & AL-42, AL51, lightening 1-V and many more
Homelite 550 Plate Back
Part: Plate Back # 12315-C Condition: good used/working shape Fits: Homelite 550 UT 10458, UT 10497, UT 10498, UT 10636
(1 in stock)
Homelite 550 Handle Bar
Part: flush cut handlebar Condition: good used/working order Fits: Homelite 550, 550SL Part # A-94077
Homelite super xl, xl-12 chainsaw 3/8-7 rim sprocket drum New (old style) (WSS)
Part: sprocket drum with a new replacement rim for the clutch. Older style with pressed in bearing Part # Oregon 68090 Condition: New, old dealer stock Fits: Homelite XL 12 and Super XL before serial # 1735838 and some Lombard saws
PM canadien sprocket drum .404 7T New (WSS)
Part: .404 7T sprocket drum Part # 270645 Condition: New, old dealer stock Fits: PM Canadien 270 and 275
Stihl MS 250, 021, 023, 025 Chainsaw Screen 1123 141 9000
Stihl 021, 023, 025, MS210, MS230, MS250 screen. Part #: 11231419000/1123-141-9000 Good used shape.
(1 in stock)
Stihl MS250 chainsaw wrist pin piston and cylinder kit
Part: piston and cylinder kit with wrist pin. Includes rings and pin. Easy start version. This cylinder does not accept a compression release valve. Condition: good used/working shape. Came off a saw with good compression. No breaks. Fits: Stihl MS250 chainsaws
(3 in stock)
Homelite Super 2 chainsaw cylinder head bolt set of 4
Part: set of 4 cylinder bolts Condition: good used/working shape Fits: Super 2, XL
Homelite XL Chainsaw Points Breaker & condenser PN A69336
Part: points and condenser. Fits some Homelite chainsaw models. Part # A-69336 / Phelon # 09072-02 Condition: good used part Fits many xl and super 2 chainsaws
Homelite Super 2 Chainsaw Top Handle Bar (metal, early model, no gripping)
Part: top handle bar Condition: good used/working shape-not cracked or bent Fits: Homelite Super 2