(2 in stock)
Olympic 950 Chainsaw Intake Manifold shield
Part: intake manifold shield 94500119, 945.00119, 0094500119 Condition: good used/working shape Fits: Olympic / Olympyk 950 / 950 F AF 950f 950af 945a 945af 945
Olympic Olympyk 950 F Chainsaw Ignition Off Switch
Part Name: Ignition Off SwitchDetailed Condition Description: good working shapeFits the Following Models: Olympic 950 FThis is a USED part, in good working order.
Olympic Olympyk 264 F Chainsaw Fuel/Gas Cap
Part Name: Fuel CapDetailed Condition Description: nice used shape, not cracked and doesn’t leak. Cap only-no keeperFits the Following Models: Olympic 264 FThis is a USED part, in good working order.
Olympic 264 F Chainsaw Fuel Filter & Lines
Part: fuel line and filter Condition: good used/working shape Fits: Olympic/Olympyk 264 F
Olympic Olympyk 261 Chainsaw Clutch Spring 50-00160 NEW
Part: Clutch Spring Part #: 50-000160 Fits: Olympic 261-may also fit other models Condition: new old stock part-never used Location: Box 5
Olympic 251 Chainsaw Rear Trigger Handle kit
Part: rear trigger handle housing with throttle trigger and safety lever interlock Part # 54.00072, 54.00358 Condition: good used/working order Fits: Oleo Mac olympyk 251
(3 in stock)
Olympic Olympyk 251 Chainsaw Muffler only
Part: muffler. PN 50.00006 / 50-00006 Condition: good used, working shape Fits: Olympic 251 252 254
Olympic 281 282 chainsaw fuel Cap
Part Name: Olympic 281, 282 Gas/Fuel Cap Detailed Condition Description: good used/working shape Fits the Following Models: 281, 282
Olympic 271 Chainsaw Intake Manifold
Part: intake manifold Condition: good used/working shape. Fits: Olympic / Olympyk 271
Olympic 264 F Chainsaw Ignition Off Switch
Part Name: Olympic 264 F Ignition Off Switch 094500497 Part Description: metal off switch Detailed Condition Description: nice used shape, in good working order Fits the Following Models: Olympyk 264F and many others This is a USED part, in good working order.
Olympic 261 Chainsaw Top Front Handle Bar
Part Name: top front handle barPart Description: good used shape, not cracked or bentFits the Following Models: Olympic 261This is a used part.
Olympic 251, 252 Chainsaw Oil Cap
Part: oil tank cap Part # 60.00253 / 60-00253 Condition: good used/working shape Fits: Oleo Mac Olympyk 251, 252
(1 in stock)
Olympic 240 Chainsaw Muffler
Part: muffler with bolts Condition: good used/working shape Fits: Olympic / Olympyk 240
Olympic 240 Chainsaw Oil Pump
Part: oil pump oiler Condition: good used/working shape. Fits: Olympic / Olympyk 240
Olympic 240 Chainsaw Choke slide
Part: choke slide lever Condition: good used/working shape. Fits: Olympic / Olympyk 240
(4 in stock)
Montgomery Ward Featherlweight 2.1 Clutch Side Cover
Part Name: clutch cover Condition Description: in good used shape-no breaks-heavy scuffing/paint loss Fits the Following Models: Montgomery Ward 2.1 Featherweight-same as Remington Mighty Mite This is a USED part, in good working order.
(1 in stock)
McCulloch Titan 620 Chainsaw Rear AV Spring Mount
Part Name: rear spring mountFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch Titan 620 Chainsaw Gas/Fuel Cap
Part Name: fuel capCondition Description: in good used shapeFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch Titan 620 Chainsaw Crankcase Tank Crankshaft
Part Name: crankcase tank with crankshaft and rodFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch SP 81 Chainsaw Top Grip Handle Bar Frame type 1
Part Name: top grip handle bar Condition Description: in good used/working shape Fits the Following Models: McCulloch SP-81, Super Pro 81
McCulloch SP 81 Chainsaw Starter Cover
Part Name: starter cover only Condition Description: in good used/working shape Fits the Following Models: McCulloch SP-81, Super Pro 81
McCulloch SP 81 Chainsaw Gas/Fuel Cap
Part Name: fuel cap Condition Description: in good used shape-not cracked-doesn’t leak Fits the Following Models: McCulloch SP-81 / Super Pro 81
McCulloch SP 60 Chainsaw Walbro SDC carburetor
Part Name: Walbro SDC carburetor Condition Description: nice used physical shape. May need a carb rebuild kit. Fits the Following Models: McCulloch SP-60/Super Pro 60
(4 in stock)
McCulloch SP60 Chainsaw Top Grip Handle Bar
Part Name: top handle bar, frame. half wrap Condition Description: in good used shape-not cracked or bent Fits the Following Models: McCulloch SP-60 / Super Pro 60, CP-60, CP-70, SP-70, cp70, cp70 This is a USED part, in good working order.
McCulloch SP 60 Chainsaw Snubber
Part Name: rod snubber Condition Description: in good used shape Fits the Following Models: McCulloch SP-60 / SP60
(1 in stock)
McCulloch SP60 Chainsaw Ignition Off Switch & wire
part: off switch with wire. Black or red in color condition: good used/working shape fits: mcculloch sp 60/ Super Pro 60
McCulloch SP-60 SP60 Chainsaw Handle Grip Frame Clamp
Part Name: handle grip frame clampCondition Description: in good used shape-no breaks-heavy paint lossFits the Following Models: McCulloch SP-60This is a USED part, in good working order.
McCulloch Pro Mac 850 Chainsaw Oil Tank Cover and Screw
Part Name: oil tank cover with screwCondition Description: in good used shape-no breaks-some paint loss/scuffingFits the Following Models: McCulloch Pro Mac 850This is a USED part, in good working order.
McCulloch Pro Mac 850 Chainsaw Lower Cylinder Shroud
Part Name: bottom cylinder shroud Condition Description: in good used shape-some paint loss/scuffing Fits the Following Models: McCulloch Pro Mac 850 This is a USED part, in good working order.
McCulloch Pro Mac 805 Chainsaw Rim Drum Clutch Assembly
Part Name: 3/8-7 rim drum clutch assembly-includes the drum, rim, bearing, nut, mechanism Condition Description: in good used /working shape Fits the Following Models: McCulloch Pro Mac 805 850. SP80 SP81 SP81E SP 80 81 81e
McCulloch Pro Mac 805 ,800 Chainsaw Air Filter Cover & Knob
Part Name: air filter cover and knob Condition Description: in good used shape-black plastic insert has a break on front left corner May vary cosmetically Fits the Following Models: McCulloch Pro Mac 805 , 800 This is a USED part, in good working order.
McCulloch Pro Mac 700 Chainsaw Filter Cover w/ Nut #1
Part Name: air Filter Cover w/ Nut Condition Description: useable shape, has several broken off grills as visible in the picture Fits the Following Models: PM 700
(1 in stock)
McCulloch Pro Mac 610 605 650 3.7 Brake Latch & Pivot
Part Name: brake latch and pivot Fits the Following Models: McCulloch Pro Mac 610 605 650 3.7 Timber Bear This is a USED part, in good working order.
(1 in stock)
McCulloch Pro Mac 555 Chainsaw Flywheel assembly
Part Name: flywheel with starter pawls Condition Description: in good used shape-no breaks Fits the Following Models: McCulloch PM 555 This is a USED part, in good working order.
McCulloch Pro Mac 55 Chainsaw Flywheel & Pawls (24 fins type)
Part Name: flywheel with starter pawls and springs. Condition: good used/working shape Fits the Following Models: McCulloch Pro Mac 55
McCulloch Mac 110 120 130 EB 2.0 Oil Pump Mounting Bail
Part Name: oil pump mounting bail in good used shape Part # 83896 Fits McCulloch Mac 110, 120, 130 & Eager Beaver 2.0, mini mac 25, 30
McCulloch Mac 110 120 130 EB 2.0 Brake Arm Lever
Part Name: brake lever arm-black or yellow in paint color 92867 Condition Description: good used shape with no breaks-paint worn off Fits the Following Models: McCulloch Mac 110, 120, 130, Eager Beaver 2.0-may also fit other models
(1 in stock)
McCulloch Mac 110 120 130 & EB 2.0 Crankshaft, Bearings Type 2
Part Name: crankshaft, rod and bearings in good used shapeFits the Following Models: McCulloch Mac 110, 120, 130 & Eager Beaver 2.0
McCulloch Mac 110 120 130 & EB 2.0 Crankshaft & Rod #1
Part Name: crankshaft and rod-does NOT have the crankshaft bearings. In good used shapeFits the Following Models: McCulloch Mac 110, 120, 130 & Eager Beaver 2.0
(1 in stock)
McCulloch Mac 10-10 Chainsaw Oil Tank Crankcase & studs #1
Part Name: oil tank crankcase w/studs Part Description:good used shape, no breaks-has some paint loss Fits the Following Models: McCulloch Mac 10-10
McCulloch Mac 10-10 Chainsaw Breaker Points and Holder
Part Name: breaker points and holderCondition Description: in good working used shapeFits the Following Models: McCulloch 10-10
McCulloch Mac 10-10 Auto Chainsaw Cylinder Cover Shroud
Part Name: cyinder shroudPart Description: good used shape, no breaks-has paint loss and darkening of the metal in some sectionsFits the Following Models: McCulloch Mac 10-10 auto
McCulloch Mac 1-10 Chainsaw yellow Air Cleaner Cover w/ Nut
Part Name: air cleaner cover and nut Part Description: good used / working shape Fits the Following Models: McCulloch Mac 1-10
McCulloch CP-55 CP55 Chainsaw Handle Frame Brace
Part Name: bottom handle frame brace Condition Description: in good used shape-no breaks-paint loss Fits the Following Models: McCulloch CP-55
(1 in stock)
Jonsered M36, 361, 365 Chainsaw Clutch Side Cover NEW 108060 (JN-AAB)
Clutch side cover. 108060 New part from old dealer stock-storage dusty/dirty Fits Jonsereds models: 361, M36, 365
Jonsered 80, 90 Chainsaw Lower Handle set - left and right sides
Part Name: Lower Handle Detailed Condition Description: good used shape with no cracks or breaks Fits the Following Models: Jonsered 80, 90
(1 in stock)
Jonsered 49sp 50 51 52 Intake Manifold
Part: intake manifold. Gray or black in color. Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52E
Jonsered Jonsereds 451 E EV Flywheel Cover/Shroud
Flywheel cover. Fits Jonsered 451 E EV. In good used shape.
Jonsered Jonsereds 370 Chainsaw Bar/Chain Tensioner
Bar tensioner in good used shape. Fits jonsered 370.
Jonsered 910 E EV Filter Mount & Bolts 504 35 86 07 type 1 (metal)
Part Name: filter mount, part # 504 35 86 07 and bolts Condition Description: in good used shape-no breaks Fits the Following Models: Jonsered 910 E EV
(1 in stock)
Jonsered 910 E EV Chainsaw Oil Pump Oiler
Oil pump in good working used order. Fits Jonsered 910 E EV.
(1 in stock)
Jonsered 910 E EV Chainsaw fuel and oil cap set
Part: set of caps, one fuel and one oil Condition: good used/working shape Fits: Jonsereds 910
Jonsered 80, 90, 49sp Left Handle Half 504 65 58-04 NEW (box Y)
For Jonsered Chainsaws Part Number: 504 65 58 04 Part Description: left rear trigger handle half Fits the Following Models: 80, 90, 49 sp Detailed Condition Description: New old stock part. Never used. Dusty from years of storage. Location: box Y
Jonsered 670 Chainsaw Flywheel Left Side Crankcase
Part Name: flywheel left side crank case half Part Description: good used/working shape Fits the Following Models: Jonsered 670
Jonsered 630 Chainsaw Stator Element for Heated Handles
Stator element for use in saws which have heated handles In good used/working shape Fits Jonsered 630 Chainsaws
Jonsered 49SP 50, 51, 52 Felt Washer PN 504-386401 NEW
For Jonsered Chainsaws Part Description: felt washer Part Number: 504-386401 Fits the Following Models: 49sp, 50, 51, 52 Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Jonsered 365 Complete Short Block-Piston-Cylinder-Crank
Complete shortblock assembly. This includes: Piston, Cylinder, rod, crank, and cylinder bolts. In nice shape. Good piston and cylinder not scored or cracked. Bottom end is tight without too much play. Fits jonsered 365.
(3 in stock)
Jonsered 361, M36 Chainsaw Choke M-100092
Part: choke Part Number: M100092 Condition: good used, working shape Fits: Jonsereds M36, 361
(1 in stock)
Jonsered 2171 Turbo Chainsaw Carburetor Intake Manifold
Intake Manifold In good used shape Fits: Jonsered 2171 Turbo Chainsaw
Jonsered 2063 2065 Inner Bucking Spike/Dawg
Inner bucking spike. In good shape and includes bolts. Came off a 2063 jonsered.
Jonsered 2055 Turbo Chainsaw Crankshaft, Rod, Bearings and pan
Part: crankshaft with the rod, bearing and crank case pan Condition: good used/working shape Fits: Jonsered 2055
(1 in stock)
Jonsered 2040 Turbo Chainsaw Oil & Cap Set
Part Name: fuel and oil cap setDetailed Condition Description: nice used shape, not crackedFits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
(1 in stock)
Jonsered 2036 Turbo Chainsaw Intake Manifold Base, Boot
Part Name: intake manifold base and bootFits the Following Models: Jonsered 2036 TurboThis is a USED part, in good working order.
(1 in stock)
Jonsered 2036 Turbo Chainsaw Bucking Spike Dawg
Part: spike. Part # 530 01 43-81 Condition: good used/working shape Fits: Jonsered 2036 2040 turbo and many poulan, craftsman and poulan pro models
John Deere 50V 50-V Chainsaw Oil Cap
Part Name: oil cap Fits the Following Models: John Deere 50V This is a USED part, in good working order.
(2 in stock)
John Deere 50V 50-V Chainsaw Choke Rod Link
Part: choke Condition: good used/working shape Fits: John Deere 50v
Jobu SL-2 Chainsaw Starter Spring and Pulley
Part: starter spring and pulley Condition: good used, working shape Fits: Jobu SL 2
Husqvarna K185 Choke Button 503 40 00-01 NEW
Part Number: 503 40 00-01 Part Description: choke button Fits the Following Models: Husqvarna K185, will also fit Partner models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Partner Box 38
Husqvarna 61, 266, 268 Chainsaw Bumper dog type 1
Part Name: bumper dawg / plate and bolts Fits the Following Models: Husqvarna 61 266 268 This is a USED part, in good working order.
(1 in stock)
Husqvarna 570, 575 Chainsaw Throttle Trigger & Safety
Throttle Trigger & Safety Good used shape Fits: Husqvarna 575, 570
(3 in stock)
Husqvarna 44 444 Chainsaw Flywheel w/ Starter Pawls
Flywheel with starter pawls and springs. Fits Husqvarna 44 444 chainsaws. In good used shape with no cracks or broken fins. Flywheel has two key grooves. On Prufrex electronic ignition saws use the keyway marked P, on breaker-points ignition and bosch electronic igniton saws use the other keyway.
Husqvarna 44, 444, 140 Chainsaw Top Front Handle bar
Husqvarna 44, 444, 140 Top Front Handlebar. In good used shape, not cracked or bent. Some minor dings/gouges in the rubber gripping.
(3 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet
Part: carburetor adjust grommet Part # 501 62 86-01 Condition: cosmetically ugly but functional Fits: Husqvarna 42 Special 242
Husqvarna 42 Special Chainsaw AV Buffer Mount
Part Name: av buffer mountCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
Husqvarna 42 Special Chainsaw Air Filter (felt)
Part Name: air filter Condition: in good useable shape-no tears Fits the Following Models: Husqvarna 42 Special
Husqvarna 42 Special Air Conductor Flywheel Cover
Part Name: air conductor, flywheel coverCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
(1 in stock)
Husqvarna 36, 41 Chainsaw Crankshaft Engine Pan Bottom
Crankshaft bottom/engine pan Good used shape, no breaks Fits: Husqvarna 36, 41 Chainsaws
Husqvarna 36 41 Chainsaw U Nut Clip Set of 3
Part Name: u speed nut/clip set of 3Fits the Following Models: Husqvarna 36 41This is a USED part, in good working order.
(4 in stock)
Husqvarna 36 41 Chainsaw Chain Catcher Stop and Screw
Part Name: chain catcher 530-029850, 530 02 98-50 Fits the many saws including the following Models: Husqvarna 36, 41 Jonsered 2150, Poulan Pro 4620 This is a USED part, in good working order.
(1 in stock)
Husqvarna 359 Chainsaw Starter Pulley
Part Name: starter pulley 537 06 59-01 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 359, 357xp, 355. Jonsered 2156 2159 Turbo This is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Clutch Cover Sprocket Side
Part Name: clutch coverCondition Description: in good used shape-some minor chips/gougeson backside of the coverFits the Following Models: Husqvarna 357 XPThis is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Air Filter type 1 (flocked)
Part Name: flocked/felt air filter Condition Description: good used/working shape Fits the Following Models: Husqvarna 357 XP
Husqvarna 35 Chainsaw Flywheel with Starter Pawls
Husqvarna 35 flywheel with the starter pawls and springs. In nice used shape with no cracks or broken fins.
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #1 (with studs)
Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266
Husqvarna 25R 24R Trimmer Boss 501 78 49-01 NEW
Part Number: 501 78 49-01Part Description: bossFits the Following Models: Husqvarna 24R 25R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 36 (Partner bin)
(1 in stock)
Husqvarna 254 257 XP Chainsaw Clutch Mechanism
Part Name: Husqvarna 257 254 XP Chainsaw Clutch Mechanism Detailed Condition Description: nice used shape Fits the Following Models: 254 257 XP This is a USED part, in good working order.
Husqvarna 254 154 Chainsaw Starter Recoil Cover Only
Part Name: Starter recoil cover only.Part Description: In good useable shape-right corner of cover has several broken grills.Fits the Following Models: Husqvarna 254 and 154This is a used part.
Husqvarna 162 SG & SE heating stator element
Part: coil heating stator element Condition: good used, working shape, tested and works Fits: Husqvarna 162 SE & SG
(1 in stock)
Husqvarna 142 Chainsaw Oil Pump Oiler Assembly
Part Name: oil pump assembly 530014410, 530 01 44-10 Condition Description: in good working shape Fits the Following Models: Husqvarna 142 137 136 141 36 41 This is a USED part, in good working order.
Husqvarna 142 Chainsaw Cover and Screw
Part Name: cover and screw 530052428, 530 05 24-28 Condition Description: in good used shape-no breaks-faded Fits the Following Models: Husqvarna 142 This is a USED part, in good working order.
Homelite Z725SE Z725CE Trimmer Air Filter D06485 NEW
Part Number: D-06485 / D06485 Part Description: air filter Fits the Following Models: Z725SE, Z725CE Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: box 15
Homelite XL2 XL-2 Chainsaw Top Front Handle Bar
Part Name: top handle barCondition Description: in good used shape-not cracked or bentFits the Following Models: Homelite XL2This is a USED part, in good working order.
Homelite XL-800 XL-700 Chainsaw Oil Line Set
Part Name: oil line setDetailed Condition Description: good used shape with no breaksFits the Following Models: Homelite XL 700 XL 800This is a USED part, in good working order.
Homelite XL-800 XL-700 Chainsaw Choke Rod/Button
Part Name: choke rod/button - may not include grommet Detailed Condition Description: good used shape with no breaks Fits the Following Models: Homelite XL 700 XL 800 This is a USED part, in good working order.
Homelite XL-800 XL-700 Blue starter recoil cover and pulley assembly
Part Name: blue starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits the Following Models: Homelite XL 700 XL 800 XL700 XL800 and others
(2 in stock)
Homelite XL-700 XL-800 Chainsaw Manual Oil Pump Oiler
Part Name: Oil Pump Assembly Detailed Condition Description: nice working shape Fits the Following Models: xl700 This is a USED part, in good working order.
(2 in stock)
Homelite XL-700 XL-800 Chainsaw Front Handle Bar
Part Name: metal top handle-blue, red or black in paint colorDetailed Condition Description: good used shape, not cracked or bent-paint worn offFits the Following Models: xl700, xl800This is a USED part, in good working order.
Homelite XL-700 XL-800 Bar/Chain Tensioner/Adjuster
Part Name: Bar TensionerDetailed Condition Description: nice used shapeFits the Following Models: xl700, xl800This is a USED part, in good working order.
Homelite XL-102 Chainsaw Top Front Handle Bar
Part Name: top front handle barCondition Description: in good used shape-not cracked or bentFits the Following Models: Homelite XL 102This is a USED part, in good working order.