homelite 240 chainsaw guide bar plate
Part: bar plate. PN 95390 Condition: good used/working shape Fits: Homelite 240
(1 in stock)
husqvarna 266se chainsaw right, clutch side crankcase half
Part: crank case (right, clutch side) with bar stud/bolt set Condition: Bearing is NOT good. Case and bar studs are in good used/working shape Fits: Husqvarna 266 se
stihl ts 350 cut off saw choke assembly
Part: choke button, slide spring Condition: good used/working shape Fits: Stihl TS-350 / TS350 cut off saw
lombard super lightning chainsaw oil check valve, hose and filter
Part: oil valve, line and pickup filter Condition: good used/working shape Fits: Lombard Super Lightning
husqvarna 230, 235 chainsaw chain tensioner adjuster
Part: chain adjuster screw, bar adjusting pin and idler gear. Part #S 545-060201, 545-060501, 545-065901 Condition: good used/working shape Fits: Husqvarna 230, 235
olympic 254 chainsaw clutch spring
Part: (1) clutch spring Condition: good used/working shape Fits: Olympyk 254
(2 in stock)
poulan 361 chainsaw air filter mount and screw set
Part: air filter mount with screws. Part #s 2598 & 1685 Condition: good used/working shape Fits: Poulan 361
olympic 950f super chainsaw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, rewind spring and grip Condition: has some broken out grills and cracked grills but is in good working order with no breaks around the bolt holes Fits: Olympyk 950 F Super
olympic 251, 252 chainsaw hand guard hardware
Part: hand guard hardware - strap and bolts Condition: good used/working shape Fits: Olympyk 251, 252
jonsered 80, 90 chainsaw intake manifold
Part: intake manifold. Part # 504 80 41-01 Condition: good used/working shape Fits: Jonsered 80, 90
montgomery ward featherweight 2.1 chainsaw tillotson hu23a carburetor
Part: Tillotson HU 23a carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Montgomery Ward Featherweight 2.1, remington mighty mite
jonsered 70e,, 66e chainsaw throttle safety kit
Part: throttle safety with link, spring and lever. Part #s 504 84 59-00, 504 38 67-00, 504 84 58-02 Condition: good used/working shape Fits: Jonsered 70 e and 66 e
homelite 410 chainsaw clutch cover # 2 with chain tensioner
Part: clutch drivecase cover with guide bar adjusting screw/pin/nut. Part # A-96500, 63367, 93039, 81204 Condition: good used/working shape Fits: Homelite 410
homelite xl-98 multi purpose saw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, rewind spring, and grip Condition: good used/working shape Fits: Homelite XL 98 saw
poulan built craftsman chainsaw model # 358.355060 & 358.355061 fuel tank
Part: fuel tank Condition: good used/working shape Fits: Poulan built Craftsman chainsaws with model # 358.355060, 358.355061
stihl 051 av chainsaw fuel line with pickup filter and connector
Part: fuel line with pickup fuel filter and connector Condition: good used/working shape Fits: Stihl 051
homelite c-5, c-51, c-52 chainsaw piston and cylinder set
Part: piston and cylinder with rings, connecting rod, pin Condition: good used/working shape. Came off a saw with good compression. Fits: Homelite C5, C51, C52
stihl 045, 056 chainsaw bosch electronic flywheel
Part: bosch electronic inner flywheel magneto. 1115 400 1206 Condition: good used/working shape Fits: some models of Stihl 045, 056 av
homelite super ez chainsaw handle bar bracket plate
Part: handle bracket plate Part # 65032 Condition: good used/working shape Fits: Homelite Super EZ
(2 in stock)
dolmar 119 chainsaw bosch inner flywheel
Part: inner flywheel magneto 119 114 100 Condition: good used/working shape Fits: Dolmar 119, 120, 120 super with bosch kdt ignition
mcculloch double eagle 50 chainsaw control switch assembly
Part: chontrol switch panel Part # 218195 Condition: good used/working shape Fits: McCulloch Double Eagle 50
stihl 056 av super chainsaw rear trigger handle top cover shroud #2
Part: rear trigger handle cover 1115 791 4900 Condition: in good used shape Fits: Stihl 056 av Super 045 av super decal/ id card may vary
(1 in stock)
shindaiwa 500, 451 chainsaw carb bracket and screw set
Part: carburetor bracket with screw/ bolt set Part # 22128-82130 & 11020-05400 Condition: good used/working shape Fits: Shindaiwa 500, 451
pioneer P40 chainsaw guide bar plate set
Part: set of inner and outer guide bar plates Part # 429659 & 429660 Condition: have some wear but are still in good used/working shape Fits: Pioneer P 40 and some other models
poulan p3416 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Poulan P 3416, 34cc / 16"
homelite ez chainsaw starter pulley and cup
Part: starter pulley and cup bushing Condition: good used/working shape Fits: Homelite EZ
homelite super ez, super xl 925 chainsaw oil cap with keeper #3 (sez bin)
Part: oil cap and keeper Condition: good used/working shape Fits: Homelite Super EZ, Super XL 925
(2 in stock)
homelite super xl, xl-12 chainsaw idle speed screw pn 63302-b new (hm box 69)
Part: idle screw Part # 63302 B Condition: new, old stock part. May be dusty/dirty from years of storage. Fits: Homelite Super XL, XL 12 Location: Homelite Box 69
homelite trimmer starter pulley pn 98770A (hm box 69)
Part: pulley, part # 98770 A Condition: good used/working shape Fits: many Homelite trimmer models
(1 in stock)
mcculloch mac 110, 120, 130, Eager Beaver 2.0 chainsaw muffler exhaust deflector
Part: muffler deflector cover Condition: good used/working shape Fits: McCulloch Mac 110, 120, 130, Eager Beaver 2.0
jonsered 2045 turbo chainsaw crankcase tank
Part: crank case engine housing tank with bar stud/bolt set, fuel filter and line. Condition: good used/working shape Fits: Jonsered 2045 Turbo
john deere / remington sl-9 chainsaw air filter cover pn 65451 used
Part: air filter cover and knob Condition: good used/working shape. Has a small crack on front edge Fits: came off a John Deere model chainsaw, also fits Remington SL 9
stihl 039 chainsaw starter cover and pulley assembly
Part: starter housing cover with pulley, rewind spring Condition: in good used/working shape. Has heavy staining, and some broken grills. Fits: Stihl 039
jonsered 630 chainsaw air filter top half only
Part: top half only of the air filter Condition: good used/working shape ,May be flocked or nylon Fits: Jonsered 630
homelite xl98 a/c/d/e and super xl 925 chainsaw gasket pn 63779-C new (hm box 69)
Part: carb gasket part # 63779 C Condition: new old stock part. Dusty/dirty from year of storage Fits: Homelite XL98-a, XL98c, XL98e, XL98d Location: box 69
homelite 240, 245 chainsaw oil cap type 1
Part: oil cap part # a-96957 Condition: good used/working shape Fits: Homelite 240, 245
olympic 950 chainsaw clutch sprocket assembly
Part: clutch - includes the rim sprocket drum, bearing, mechanism (carrier, shoes, spring, washer and rim Condition: good used/working shape Fits: Olympyk 950
stihl 020 chainsaw starter rewind spring
Part: rewind spring. Part # 1114 190 0600 Condition: good used/working shape Fits: Stihl 020
(1 in stock)
jonsered 80 chainsaw rear trigger handle kit
Part: rear handle kit - includes all of the casting pieces, the throttle trigger, safety interlock lever and link. Part # s 504 65 55-00, 504 65 56-00, 504 65 58-04, 504 65 57-04, 504 84 59-00, 504 38 67-00 Condition: good used/working shape Fits: Jonsered 80 90 801
(3 in stock)
craftsman 2.3 power-sharp chainsaw clutch cover
Part: power sharp clutch sprocket side cover Condition: good used/working shape Fits: Poulan built Craftsman 2.3
husqvarna 65l chainsaw starter pulley
Part: starter pulley 501 40 24 Condition: good used/working shape Fits: Husqvarna 65 L
stihl ms 361 chainsaw chainbrake kit
Part: chainbrake kit - includes the brake band, spring, links and the brake handle guard. 1135 790 9100, 1135 160 5501, 1135 160 5450 Condition: good used/working shape Fits: Stihl MS361
homelite 240, 245 chainsaw nut retainer pn 95375 new (hm bin 64)
Part: retainer nut Condition: new, old stock part Fits: Homelite 240, 245 Location: box 64
homelite 250 chainsaw starter recoil cover and pulley kit (Hm box 65)
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Homelite 250 Location: box 65
homelite xl98-a, xl98-c saw fuel cap (Hm box 65)
Part: fuel cap (red or black in color) PN A-69500-A Condition: good used/working shape Fits: Homelite XL 98a, XL 98c Location: box 65
homelite super xl chainsaw red drivecase complete with lines, tensioner, studs
Part: drive case with bar stud/bolt set, and chain adjust tensioner assembly Condition: nice, lightly used shape Fits: Homelite Super XL
echo cs-340, cs-346, cs-345, cs-341 chainsaw oil pipe
Part: oil pipe / line, part # 43721139133 Condition: good used/working shape Fits: Echo CS 340 / 341 / 345 /346. May also fit other models.
echo cs-340, cs-341, cs-345, cs-346 chainsaw choke shutter with plate and screw set
Part: prevent plate (12901139130) with choke shutter (17851539130) and screws (90023805045) Condition: good used/working shape Fits: Echo CS 340 / 341 / 345 / 346 / 3000 CS3000 . May also fit other models.
jonsered 80, 90 chainsaw av buffer mount #3
Part: buffer mount. Part # 504 12 50-16 Condition: good used/working shape Fits: Jonsereds 80, 90
piston ring 1.5mm x 54mm new (bin 517)
Part: Piston Ring. 1.5mmx54mm. Condition: New, after-market part Location: new misc. parts bin #3, box 517
dolmar 112 chainsaw top cover shroud
Part: top cover engine hood, part # 112 118 010 Condition: has some hairline cracks on top cover cover and on front edge and some minor melting on underside, but is in usable condition. Fits: Dolmar 112
pioneer farmsaw II chainsaw crankcase half #1 (Right side)
Part: right (clutch side) crank case half with bar stud/bolt set. Condition: good used/working shape Fits: Pioneer Farmsaw II, P41 P-41, P38 P-38, P39 P-39, and others
husqvarna 268 chainsaw crankcase half (right side)
Part: crank case half, right clutch side Condition: good used/working shape Fits: Husqvarna 268 268xp 272xp 272 xp.
pioneer farmsaw II chainsaw bottom frame with shock absorber set & guard
Part: bottom handle frame brace (430196-B) with 4 av buffer shock mounts (433067) and guard Condition: good used/working shape Fits: Pioneer Farmsaw II
pioneer farmsaw II chainsaw reed valve and backing plate
Part: reed valve Condition: good used/working shape Fits: Pioneer Farmsaw II
jonsered 2041, 2045, 2050 turbo chainsaw muffler heat shield
Part: muffler heat shield plate. PN 503 48 24-01 Condition: good used/working shape Fits: Jonsered 2041, 2045, 2050 turbo
jonsered 2041, 2045, 2050 turbo muffler #2
Part: muffler only (no hardware) part #s 503 59 51-01 & 503 59 51-02 Condition: good used/working shape Fits: Jonsered 2041, 2045, 2050 Turbo
(1 in stock)
pioneer farmsaw, farmsaw II chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws, bolts, (everything pictured) Condition: good used/working shape Fits: Pioneer Farmsaw, Farmsaw II. May also fit other models.
mcculloch d-44, s-44 chainsaw hl19D tillotson carburetor
Part: Tillotson HL 19D carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: McCulloch D44, S44 and some other models
husqvarna 268, 272 chainsaw rubber buffer plug
Part: rubber buffer plug Condition: good used/working shape Fits: Husqvarna 272, 268
mcculloch titan 57 chainsaw bolt
Part: bolt Condition: Good used/working condition Fits: McCulloch Titan 57
homelite super xl chainsaw piston ring set
Part: set of piston rings Condition: Good used/working condition Fits: Homelite Super XL
poulan built craftsman 18", 40cc chainsaw chain tensioner
Part: chain adjust screw, pin Condition: good used/working shape Fits: Poulan built Craftsman 18", 40cc and some other models
mcculloch mac 110, 120, 130 & Eager beaver 2.0 chainsaw clutch sprocket drum
Part: clutch spur sprocket drum, pn 215252 Condition: good used/working shape Fits: McCulloch Mac 110, 120, 130, Eager Beaver 2.0 models
husqvarna 44 chainsaw muffler gasket
Part: muffler gasket Condition: good used/working shape Fits: Husqvarna 44
mcculloch titan 57 chainsaw ignition off switch
Part: off switch/control Condition: good used/working shape Fits: McCulloch Titan 57
(1 in stock)
mcculloch titan 57 chainsaw top handle bar
Part: top front handlebar Condition: good used/working shape Fits: McCulloch Titan 57, Double eagle 50
stihl 021, 023, 025 chainsaw chain tensioner kit type 2
Part: chain tensioner adjust kit Condition: good used/working shape Fits: Stihl 021, 023, 025
stihl 021, 023, 025 chainsaw oil line
Part: oil hose line with pickup filter, pn 1123 647 9400 & 1123 640 3800 Condition: good used/working shape Fits: Stihl 021, 023, 025
stihl ms 361 chainsaw tank washer
Part: tank washer. PN 1135 121 8600 Condition: good used/working shape Fits: Stihl MS361
jonsered 2054, 2055 turbo chainsaw ignition off switch #2
Part: off switch Condition: good used/working shape Fits: Jonsered 2054, 2055 Turbo
(1 in stock)
echo cs-340 chainsaw air filter cleaner cover
Part: air filter cover / cleaner lid. PN 13030239134. Condition: good used/working shape Fits: Echo CS340 / CS 340
(1 in stock)
husqvarna practica 40 chainsaw air filter
Part: air filter Condition: good used/working shape Fits: Husqvarna Practica 40
poulan 306a, 245a chainsaw carb gasket
Part: carb. adapter to c/case gasket. PN 19022 Condition: good used/working shape Fits: Poulan 306 a, 245 a
mcculloch titan 57 chainsaw fuel and oil cap set
Part: set of caps, one gas and one oil Condition: good used/working shape Fits: McCulloch Titan 57
homelite super xl, xl-12 chainsaw muffler plate
Part: muffler baffle plate Condition: good used/working shape Fits: Homelite Super XL, XL12
mcculloch mac 110, 120, 130, Eager beaver 2.0 chainsaw throttle spring
Part: throttle trigger spring, pn 83940 Condition: good used/working shape Fits: McCulloch Mac 110, 120, 130, Eager Beaver 2.0
mcculloch titan 57 chainsaw fuel tank rear trigger handle
Part: fuel tank rear trigger handle with throttle trigger and safety interlock Condition: good used/working shape Fits: McCulloch Titan 57
stihl 028 chainsaw ground wire
Part: ground wire Condition: good used/working shape Fits: Stihl 028
husqvarna 570, 575 xp chainsaw flywheel nut
Part: flywheel nut. Part # 503 22 04-01 Condition: good used/working shape Fits: Husqvarna 570, 575xp
husqvarna 575 xp chainsaw lot of assorted hardware - screws
Part: lot of misc. hardware Condition: good used/working shape Fits: Husqvarna 575xp
echo cs-360t chainsaw impulse line
Part: impulse line/pipe Condition: good used/working shape Fits: Echo CS 360T / 360 T
(3 in stock)
stihl ms 361 chainsaw intake manifold boot
Part: manifold boot with clamp. Part # 1135 141 2200 Condition: good used/working shape Fits: Stihl MS361
stihl ms 361 chainsaw toggle switch kit
Part: toggle switch shaft with wire and contact spring. 1135 182 0900 Condition: good used/working shape Fits: Stihl MS361
homelite c series chainsaw guide bar plate outer
Part: outer bar plate Condition: good used/working shape Fits: Homelite C series chainsaws, c-5, c-7, c-9 and others
(2 in stock)
olympic 254 chainsaw ignition off switch
Part: off stop switch Condition: good used/working shape Fits: Oleo Mac Olympyk 254
jonsered 2141, 2145, 2150 turbo chainsaw intake manifold boot
Part: intake boot (503 86 63-01) and spacer (503 86 64-01 Condition: good used/working shape Fits: Jonsered 2141, 2150, 2145 Turbo
poulan 245a, 306a clutch sprocket assembly
Part: clutch assembly, includes the spur sprocket drum, 3 shoe mechanism, bearing, race, washers Condition: good used/working shape Fits: Poulan 306 a, 245 a
poulan 245a chainsaw tillotson hs 198a carburetor
Part: HS198A tillotson carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Poulan 245 A
husqvarna 480 cd chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Husqvarna 480cd
husqvarna 480 cd chainsaw throttle link rod
Part: throttle link rod Condition: good used/working shape Fits: Husqvarna 480cd
husqvarna 480 cd chainsaw throttle lever guide and spring
Part: throttle lever guide and spring Condition: good used/working shape Fits: Husqvarna 480cd
(2 in stock)
jonsered 2150 turbo chainsaw flywheel and starter pawl set
Part: flywheel with starter pawls. 503 82 43-01 Condition: good used/working shape. No broken fins Fits: Jonsered 2150, 2145, 2141 Turbo
(3 in stock)
Olympyk Trimmer rubber strap new part # 4098-179 (bin 514)
Part: rubber strap. Part # 4098 179 Condition: new Location: new misc. parts bin #2, box 514
dolmar 112 to120s series chainsaw clutch tension spring
Part: clutch tension spring, part # 114 184 010 Condition: good used/working shape Fits: Dolmar 112, 114, 117, 120, 120s
stihl 045, 056 av chainsaw top handle screw
Part: top handle bar mount collar screw/bolt 1115 791 6101 Condition: good used/working shape Fits: Stihl 045, 056 av
stihl 034, 036 av chainsaw crankcase gasket new (box 513)
Part: crank case gasket Condition: new Fits: Stihl 034, 036 av
lombard comango, ap-42, al-42 chainsaw early model inner bar plate new (lombard bin)
Part: inner guide bar plate Condition: new Fits: early model (older) Lombard Comango, AL42, AP42 Location: Lombard bin
homelite 350, 360 auto chainsaw torsion spring
Part: torsion trigger spring. Part # 12051 Condition: good used/working shape Fits: Homelite 350, 360 auto