Stihl 066 Chainsaw Oil Pump
Automatic oiler 1122 640 3205 In good used shape Fits Stihl 066 MS660 Magnum Chainsaws
stihl 066 chainsaw metal flywheel pn 1122 400 1209 2 key way
Part: 066 flywheel with two key ways Part # 1122 400 1209 Condition: good used/working order. Does not include nut. Fits: some models of Stihl 066
(3 in stock)
Stihl MS361 Chainsaw Rubber Rear Tank Handle Mount 1135 790 9902 NEW (ST-204B)
Right side rear trigger handle gas fuel tank rubber AV buffer mount. 1135 790 9902, 1135 790 9900, NEW old stock from closed out dealer Fits MS361 MS341 MS 341 361 C CM
stihl 066 chainsaw flywheel crankcase half #2
Part: crank case housing half, bare bones Condition: good used/working order. a little dinged up. Fits: stihl 066 early
Stihl 034 Chainsaw hardware kit
Hardware kit, includes screws, bolts, and parts pictured for case, head, etc. In good used shape Fits Stihl 034
Stihl 020 av chainsaw points to electronic ignition assembly
Part: ignition coil with points and electronic module. Condition: good used/working shape. tested and makes strong spark Fits: stihl 020 av
Stihl MS270 Chainsaw Crankcase Assembly bare bones
Crankcase assembly bare bones. 1133 021 0160 A In good used shape Fits Stihl MS270, MS280, MS 270 280
Stihl MS270 Chainsaw Fuel Tank Assembly #3
Gas tank rear trigger handle 1133 350 0502 B. Includes: tank, handle cover molding, trigger, throttle link, fuel line, vent, intake boot. All that is included in the photo. In good used shape Fits Stihl MS270, MS280, MS 270 280
Stihl 020 AV chainsaw lot of assorted hardware #2
Part: lot of misc. hardware (includes everything pictured) Condition: good used/working shape Fits: Stihl 020 020AV
stihl 015 chainsaw starter recoil cover and pulley assembly #1 (white, with cast rear handle built in)
Part: starter fan housing cover with case rear handle, pulley rewind spring and grip 1116 084 0900 Condition: good used/working order Fits: Stihl 015 (does NOT fit the av version of 015 chainsaws)
stihl 041 av chainsaw muffler bolts
Part: set of muffer screws/bolts Condition: good used/working shape Fits: Stihl 041av
Stihl MS191t Chainsaw Piston and Cylinder
Includes: piston with ring, wrist pin, and cylinder In good used shape Fits some models of Stihl MS 191c 191t 019t ms191 t.
stihl 039 chainsaw rear handle housing #1
Part: rear handle housing cover with handle molding cover, switch, throttle trigger and trigger interlock safety Condition: good used/working shape. Minor fading of plastic. Part #s 1127 970 1001, 1123 791 0600, 1128 182 1005, 1117 182 0805 Fits: came off a stihl 039, will also fit 029
stihl 046 chainsaw lot of assorted hardware and small parts #1
Part: lot of misc. hardware - bolts, screws for the case/head/muffler/handle, mount screws (includes everything pictured) Condition: good used/working order Fits: Stihl 046
stihl 041 av chainsaw throttle trigger and safety interlock lever set #2
Part: throttle trigger, safety lever and springs and one pin Part # 1110 182 0800, 1110 182 1001 Condition: good used/working order Fits: Stihl 041av 051av 050av 051 av
stihl 011 av chainsaw av buffer mount set #2
Part: av buffer mount set. Includes all in photo. Condition: good used/working shape Fits: Stihl 011 012 av 011av 012av
stihl 028 chainsaw clutch cover type 2 pn 1119 648 0403 #3
Part: clutch sprocket cover, for saws with front adjust chain tensioner. Part # 1119 648 0403, 1118 648 0400 Condition: good used/working order. Not very pretty, but functional. Fits: stihl 028av, 028wb, 024av, 024 AV Woodboss
stihl ms 361 chainsaw fuel tank rear trigger handle #2
Part: fuel tank rear trigger handle assembly. Comes with all parts in photo.1135 350 0804 Condition: good used/working shape with no leaks. Fits: Stihl MS361
(1 in stock)
Stihl 017 chainsaw Chainbrake brake band 1123 160 5400 NEW (S-M)
Brake band. 11231605400 New OEM from closed out dealer Fits Stihl 017 018 MS170 MS180 021 023 025 MS210 MS230 MS250 ms200t 020t will not fit jiffy ice augers
stihl ms441 chainsaw chainbrake handle
Part: hand guard chainbrake handle 1138-790-9101 11387909101 1138 792 9100 good used shape Fits: Stihl MS 441
Stihl ms441 chainsaw flywheel side crankcase half
Part: crank case half, flywheel side 1138 021 0760 Condition: good used/working shape. Some dings and chips. Fits: stihl ms441 ms 441 Magnum
Stihl 019T chainsaw mount kit
Set of annular buffer and plugs 1127 791 2800, 1132 791 7310, 1132 122 7300 Good used shape Fits 019 T chainsaws
Stihl MS440 Chainsaw Clutch side Crankcase Half #2
Clutch PTO right side crank case half only. 1128 020 2951 In good used shape. Has some marks from the chain but still good and functional Fits Stihl MS 440
stihl 044 av chainsaw crankcase half clutch side #3
Part: clutch side of the crank case half 1128 020 2901 Condition: good used/working shape, has some scrapes and chips Fits: some models of Stihl 044 AV
stihl 015 av chainsaw roller bearings for the connecting rod
Part: connecting rod roller bearings 0000 987 1001 Condition: good used/working order Fits: stihl 015av 015
Stihl 041 AV Chainsaw Bar Stud
Part: bar stud Condition: good used, working shape Fits: Stihl 041 av
stihl 009 to 012 chainsaw brake bolt and spring pn 1120 792 3300
Part: brake bolt / collar screw and torsion spring Part # 1120 792 3300, 0000 998 1404 Condition: good used/working order Fits: Stihl 009, 009l, 010, 011, 012
stihl 011 avt chainsaw oil pump type 2
Part: oil pump Condition: good used/working shape Fits: Stihl 011 AV AVT 011avt 009 and probably others
stihl ms210, ms230, ms250 chainsaw lot of assorted hardware #2
Part: lot of misc. hardware, screws Condition: good used/working shape Fits: stihl ms 210, 230, 250
Stihl MS270 Chainsaw Handle Buffer mount kit #2
Rubber and spring AV tank and handle buffer mounts with hardware and caps. In good used shape Fits Stihl MS270 MS280 MS 270 280
Stihl MS261 Chainsaw Captive Nut Clutch Cover 1141 648 0460
captive nut type clutch cover 11416480460 1141-648-0460 In good used shape Fits Stihl MS261 MS-261 MS 261 Some MS 362 MS-362 MS362
Stihl 045 056 Chainsaw Clutch cover 1115 648 0400 #2
Clutch cover. Part number 11156480400, 11156401700, 1115 640 1700 In good used shape. Has a crack - see photos Fits Stihl 045av, 056av, 045 056 av series without chainbrake
Stihl 029, 039, ms290, ms310 chainsaw .325/8T clutch spur sprocket drum
Part:.325" 8 Tooth spur sprocket drum for the clutch Part # 1125/08 Condition: good used/working order Fits: Stihl 029, 039, ms290, ms310, MS390
Stihl MS390 Chainsaw Starter Assembly #2
Starter rewind recoil cover assembly. 1127 080 2103 In good used shape. Has a few cracks Fits Stihl MS290 MS310 MS390 MS 290 310 390
stihl 028 chainsaw clutch cover type 2 pn 1119 648 0403 #2
Part: clutch sprocket cover, for saws with front adjust chain tensioner. Part # 1119 648 0403, 1118 648 0400 Condition: good used/working order. Fits: stihl 028av, 028wb, 024av, 024 AV Woodboss
Stihl Chain Sprocket for 017 , 018 , 019 , 021 , 023 , 025 and others NEW (S-M) 1123 640 2003
Part: Chain sprocket, 1123 640 2003 Condition: New old stock OEM part Fits: 017, 018, 019, 021, 023, 025, MS170, MS180, MS190, MS210, MS230, MS250, MS250C
(1 in stock)
Stihl 044 046 chainsaw air filter cover knob 1124 140 9500 new (ST-202B)
Twist lock filter cover knob. Part number 1124-140-9500 11241409500 New OEM from closed out dealer stock Fits Stihl 044, 046 AV, MS440, MS460
Stihl 064 Chainsaw Fuel Cap 0000 350 0508
Gas filler cap assembly 0000 350 0508, 0000-350-0508, 0000 350 0509, 000 350 0530 good used shape Fits Stihl 064 Magnum, 064av, 066 AV Magnum, 066av 084av .84 av some models of 044
Stihl L-key NEW (ST-202B) 0812 370 1000
Part: L-key, 0812-370-1000 Condition: New old stock OEM part
Stihl Metal Piston Stop NEW (ST-202B) 1107-191-1200
Part: Piston stop, 1107 191 1200 Condition: New old stock OEM part For removing sprockets on most string trimmers, blowers and chainsaws
stihl 034, 036, 064 chainsaw oil line 1124 007 1010 new (st-202B)
Oil line, spring AND brass ferrule Part # 11240071010/ 1124-007-1010 New old stock part from closed out dealer Fits Stihl 034, 036, 064, MS 360 C, 084, MS 360, MS 340, MS 640
Stihl 020 Chainsaw Handle Cover Molding 1114 791 0600 new (ST-202b)
Handle cover molding 11147910600 1114-791-0600 New OEM from closed out dealer stock Fits Stihl 020
Stihl MS270 Chainsaw clamping ring 1133 148 7000 New (st-202a)
NEW OEM from old dealer stock 1133-148-7000 11331487000 Clamping tightening ring Fits Stihl: MS 270 280 MS280
Stihl 066 chainsaw impulse hose new 1122 141 8600 (ST-202A)
Part: impulse hose. Part # 1122-141-8600 Condition: New OEM from closed out dealer stock Fits: Stihl 066 ms660 064 and others
stihl 024, 026 av chainsaw muffler NEW (ST-202A)
Part: muffler assembly 1121 140 0602 Condition: New, OEM from closed-out dealer Fits: Stihl 024av, 024 av, 024 super, 026AV, 026 Pro, MS260
stihl 019t chainsaw hook 1132 350 7000 new (S-2)
part description: d ring clip hook for arborist's belt or climbing harness condition : new from closed out dealer stock part number # : 1132-350-7000 fits : stihl 019T , 019 T, MS191t, MS191 t
Stihl MS 361 chainsaw carb adjust grommet guide new 1135 123 7501 (ST-204b)
Part Name: carburetor hi low grommet. PN 1135-123-7501 Condition Description: New from closed out dealer stock Fits the Following Models: Stihl ms361
stihl ms 361 chainsaw rear trigger handle cover1135 791 0600 New (ST-204B)
Part: handle cover molding. PN 1135 791 0600 Condition: New from closed out dealer stock Fits: Stihl MS361
Stihl ms200t, MS440 chainsaw large fuel filler cap 0000 350 0535 NEW (ST-204b)
Fuel filler gas cap Flip style. Stihl part number 0000 350 0525 ST0000 350 0525 & ST0000 350 0535 replaced by ST0000 350 0533 New old stock part from closed out dealer Fits many models including MS250, MS200t, MS192, MS361, MS362, MS270, MS280, MS210, MS230, MS260, MS192t, MS251, MS...
Stihl 028 Chainsaw Rim Type Oil spur gear New Oregon part number 30395 (ST-204b)
Oil pump rim type drive gear used on oregon powermatch system Oregon part number 30395 New from closed out dealer stock Fits Stihl 028av 028wb 028 av woodboss super etc.
stihl 066 chainsaw starter rewind spring pn 1129 190 0605 B new (ST-204B)
Part: starter rewind recoil spring part # 1129-190-0605 Condition: New from closed out dealer stock Fits: some models of Stihl 066
Stihl 064 Chainsaw Air filter 1122 120 1605 new (ST-204A)
Nylon air filter. Stihl part number 1122-120-1605 New from closed out dealer stock. May be dusty, have slight rust from years of storage. Fits Stihl 064av, 064 av 066
stihl 024 026 chainsaw toggle switch shaft 1125 182 0900 new (ST-204A)
Part: toggle switch shaft, part # 1125 182 0900 or 1121 182 0900. Condition: New from closed out dealer stock Fits: stihl 024 av, 026 av, 024av, 026av, any 024 or 026 series chainsaw.
Stihl 064 Chainsaw Fuel Cap 0000 350 0508 NEW (st-207a)
Gas filler cap assembly 0000 350 0508, 0000-350-0508, 0000 350 0509, 000 350 0530 NEW OEM from closed out dealer stock Fits Stihl 064 Magnum, 064av, 066 AV Magnum, 066av
stihl 064 chainsaw starter rewind spring 1122 190 0600 new (st-207A)
Part: starter recoil spring and container Part # 1122-190-0600 11221900600 Condition: New OEM from closed out dealer stock. Dusty/some surface rust from years of storage. Fits: stihl 064
Stihl MS360 Chainsaw Oil line 1122 647 9400 NEW (st-207A)
Oil pickup tube hose Stihl Part number 1122 647 9400 NEW OEM from closed out dealer stock Fits Stihl 036, 034, MS360, and many others
stihl 020 chainsaw 1/4"-8t spur sprocket drum new 1114 640 2000 (ST-207A)
Part: 1/4" pitch x 8T spur sprocket drum for the clutch O.E.M Part # 1114-640-2000 11146402000 Condition: new from closed out dealer stock Fits: some models of Stihl 020av, 020ave, 020 professional, 020av super (models with washers)
stihl 009 chainsaw cylinder gasket new 1120 029 2302 (ST-203)
Part: cylinder base gasket 11200292302 1120-029-2302 Condition: New OEM from old dealer stock Fits: stihl 009 010 011 012
Stihl ms261 chainsaw crankcase half and bar stud set 1141 021 0860 B #2
Part: clutch PTO side crank case housing half with bar stud set 1141-021-0860 Condition: good used/working order. Has a small break at the bottom. See photos. Fits: Stihl MS 261 MS-261
Stihl MS261 chainsaw Zama C1Q-S252 carburetor
Zama C1Q-S252 carburetor Good used physical shape. May need a carb rebuild kit Fits some MS 261 MS271 MS 271 MS 291 MS291
Stihl MS261 chainsaw air baffle 1141 121 6900
air baffle 1141-121-6900 1141 121 6930 A Good used shape Fits MS 261 C MS271 MS 271 MS 291 MS291
stihl MS261 chainsaw oil hose and pickup
Part: oil line hose and pickup, part # 1117 640 3800 & 1141 647 9400 Condition: good used/working shape Fits: Stihl MS 261 MS-261
Stihl MS261 chainsaw air filter base and switch 1141 141 0900
Air filter base with switch and leads 11411410900 Good used shape Fits MS 261
Stihl 020, 030, 031, 032, 056 Chainsaw Collar Screw 1113 791 6110
Stihl 020, 030, 031, 032, 056 collar screw Part #: 11137916110/1113-791-6110 good used shape
Stihl MS250 Chainsaw Standard Clutch Cover #2
Standard bar stud and nut type clutch cover 1123 648 0405 Does not have the chain catch, or chain catch may be compromised In good used shape Fits Stihl MS210 MS230 MS250 021 023 025
Stihl MS391 Chainsaw Clutch Backing Washer 1127 162 1000
Oil pump worm gear cover washer, clutch backing washer. 11271621001, 1127 162 1000, 11271621000 Good used shape Fits: 029, 039, MS290, MS310, MS390 MS 391 MS311
stihl MS391 chainsaw clutch mechanism
Part: clutch mechanism -shoes, carrier, springs Part # 1140 160 2001 Condition: good used/working order Fits: Stihl MS 391 MS311 MS 311
Stihl ms 391 chainsaw intake manifold boot
Part: intake manifold boot Condition: good used/working shape Fits: Stihl MS391 MS311 MS 311
Stihl MS391 chainsaw oil line and filter 1140 647 9401
Part: oil hose line with pickup filter, pn 1140-647-9401 & 1127 640 3800 1127-640-3800 Condition: good used/working shape Fits: Stihl MS391 MS 391 MS311 MS 311
Stihl MS361 Chainsaw Cylinder Gasket Base 1135 029 2300 (upstairs)
Stihl MS341, MS361 and MS361C chainsaw cylinder gasket base. Part #: 11350292300 New aftermarket part
stihl 041 chainsaw lot of assorted hardware
Lot of assorted hardware. Includes all in picture. Condition: good used/working shape Fits: Stihl 041 av 041
stihl 020 av chainsaw complete starter/recoil and pulley assembly #2
Part: starter cover, fuel tank, with the pulley. 1114 080 1803, 1114 350 0801 Condition: good used/working shape. Has a crack, but is still functional. Fits: Stihl 020AV, 020avp, 020 AV AVP
Stihl 042AV Chainsaw Cylinder Set
OEM Mahle 49mm Bore top end kit includes: cylinder head, wrist pin, bearing and keeper clips. 1117 020 1200 In good used shape Fits Stihl 042 av ave 042ave 042av
stihl ms210, ms230, ms250 chainsaw nylon air filter and mount holder
Part: nylon air filter with filter housing mount Part # 1123 120 1613, 1123 124 3505 Condition: good used/working order Fits: stihl ms 210, 230, 250
(1 in stock)
25" .404 .063 GB Pro Top Chainsaw bar for Large Stihl Saws 050 - 084 #1
Professional replaceable tip bar. .063ga .404 Pitch. 25", 84 drive link New old stock Has some minor surface rust/paint chipping from years of storage. Fits the extra large Stihl mount: 050, 051, 075, 076, 070, 084, 08S and Echo CS1100
Stihl ms441 chainsaw lot of assorted hardware #4
Part: lot of misc. hardware - screws / bolts (includes everything pictured) Condition: good used/working shape Fits: stihl ms 441
Stihl 039 oil cap
Part: 039 oil cap only Condition: good used/working order Fits: Stihl 029, 039
Stihl 039 starter pulley
Part: 039 starter pulley only Condition: good used/working condition Fits: 039 029 MS 290 MS 390 MS 310 and others
Stihl 038 - 048 Chainsaw Clutch Bearing 9512 933 3150 NEW (I600)
Clutch sprocket needle bearing. 95129333150 NEW from old dealer stock Fits Stihl 038 038av 038 Magnum Super 042 042av 042ave 048av 048ave ave av
Stihl 042AV Chainsaw Flywheel Side Crankshaft Bearing 9503 003 0340 NEW (I600)
Flywheel side crank bearing 95030030340 NEW from old dealer stock Fits Stihl 042 048 AVE AV 042av 042ave 048av 048ave
Stihl 042AV Chainsaw PTO Side Crankshaft Bearing 9523 003 4360 NEW (I600)
Clutch side crank bearing 95230034360 NEW from old dealer stock Fits Stihl 042 048 AVE AV 042av 042ave 048av 048ave
Stihl 011AV Chainsaw Rear AV Support Bracket 1120 791 7605 NEW (I600)
Rear AV rubber buffer mount support bracket. 11207917605 NEW from old dealer stock Fits Stihl 011 012 010 av avt 010av 011av 011avt 012av 012avt
(1 in stock)
Oregon Firewood Processor Bar Sprocket Nose Kit .404 Pitch .080 Gauge 101918 NEW (DB-4)
Harvester bar sprocket nose kit with, bearing rollers, and rivets, 11T 11 tooth, 101918 Brand New Fits newer yellow .404 pitch .080" gauge Oregon processor bars
Stihl 009 chainsaw walbro WT563 carburetor
Part: walbro WT 563 fixed high jet carb Condition: good used physical shape, may need a carb rebuild kit Fits: Stihl 009 009l 009 L 011 012 AV AVT
Stihl BG 72 Blower Fan Grille Cover 4229 706 8000 (S-AG)
Fan grill cover. 42297068000 Fits Stihl BG72 blower models
Stihl 009L Chainsaw Trigger Spring 0000 998 0701 NEW (I600)
Throttle trigger and safety torsion spring 00009980701 NEW from old dealer stock Fits Stihl 009 L
Stihl 018C Chainsaw Crankshaft Assembly
Crankshaft crank and rod assembly with bearings. 1132 030 0402 In good used shape Fits Stihl 018 018c MS170 MS180
Stihl 064, 066. 044, 084, ms440, ms640 Chainsaw Air Filter Insert NEW 0000 124 0800 (S-AG)
HD air filter insert. 00001240800 New part from old dealer stock. Fits Stihl chainsaw models: 064, 044, 084, ms440, ms640
Stihl 08, 08s, 350 Chainsaw Starter Housing Cover 1108 080 1800 (S-AG)
Starter housing cover only. 11080801800 from old dealser stock-still dusty/minor scuffing etc. from years of storage Fits Stihl 08, 08s, 350 chainsaw models
Stihl Rollomatic Pro 3 Rivet Replacement Sprocket Nose 3/8" NEW OEM Stihl 3003 650 2551 (.050 .058 .063 ga) (S-AG)
Aftermarket three rivet replaceable sprocket bar tip for 3/8" .375 pitch, .050ga .058ga .063ga Fits Stihl 3003 650 2551
Stihl 024, 026 Chainsaw Starter Housing Cover NEW 1121 080 1800 (S-AG)
Starter recoil housing cover. 11210801800/ 1121 080 1803 New part from old dealer stock Fits Stihl 024 026 chainsaw models
Stihl 028 Chainsaw Set of Points NEW 1118 400 2000 (PO4)
Points. 11184002000 New part from old dealer stock Fits Stihl chainsaw models: 028
Stihl 015, 020 Chainsaw Muffler Assembly NEW 1114 140 0607 (PO4)
Muffler assembly. 11141400607 New part from old dealer stock Fits Stihl chainsaw models: 020, 015
Stihl 075, 050, 051, 076 Chainsaw Clutch Shoe NEW 1111 162 0803 (PO4)
Clutch shoe. 11111620803 New part from old dealer stock Fits Stihl chainsaw models: 075, 050, 051, 076
Stihl 038av Chainsaw Intake Boot NEW 1119 141 2200 (PO4)
Intake elbow boot. 11191412200 New part from old dealer stock Fits Stihl chainsaw models: 038 av ave, MS380, MS381
Stihl 015, 028 Chainsaw Oil Pump and Gear NEW 1116 640 3200 (PO4)
Oil pump oiler. 11166403200 New part from old dealer stock Fits Stihl chainsaw models: 015, 028
Stihl 028 Chainsaw Condenser NEW 1118 404 3400 (S-489)
Condenser. 11184043400 New part from old dealer stock Fits Stihl chainsaw models: 028
Stihl 031av Chainsaw Condenser Repair Kit NEW 1113 007 1064 (S-489)
Condenser repair kit. 11130071064 New part from old dealer stock Fits Stihl 031 av chainsaw models
Stihl 038 Magnum Chainsaw 52 mm Piston Kit NEW OEM 1119 030 2002 (S-489)
52mm piston with rings, pin, circlips new part from old dealer stock fits Stihl 038 magnum chainsaw models