Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
husqvarna 365, 362 chainsaw pin coupling nut pn 501 53 74-01 new box h-2
Part: pin coupling / bar adjusting nut Part Number: 501 53 74 01 Condition: new old stock part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362 Location: Box H-2
jonsered, husqvarna chainsaw filter mount pn 504 17 11-16
Part: air filter mount, part # 504 17 11-16 Condition: good used/working shape Fits: some Jonsered and Husqvarna models Location: Misc Bin
(2 in stock)
husqvarna 44, 444 chainsaw muffler (type 2)
Part: muffler Condition: good used/working shape Fits: Husqvarna 44, 444
husqvarna 162 se chainsaw starter pulley kit
Part: starter pulley with spring and cassette 501 52 07-01, 501 52 95-02, 501 52 04-01 Condition: good used, working shape Fits: Husqvarna 162se
husqvarna 163 chainsaw ignition coil
Part: ignition coil Condition: good used shape, tested and works Fits: Husqvarna 163
husqvarna 50 chainsaw flywheel cover
Part: flywheel cover Condition: good used/working shape Fits: Husqvarna 50
husqvarna 242 chainsaw ignition coil module
Part: ignition module Condition: good used shape, tested and works Fits: Husqvarna 242
(2 in stock)
husqvarna 50 chainsaw intake manifold base and boot
Part: intake manifold base and intake boot Condition: good used, working shape Fits: Husqvarna 50
husqvarna 395 chainsaw 56mm piston kit new
Part: 56mm piston with rings, pin and keepers. Part number 537 13 76-71 Condition: new, after-market part Fits: Husqvarna 395 xp, 395xp Location: new piston box
Husqvarna 50, 51, 55, Chainsaw Plug Cover
Part: Plug cover. PN 501 76 44-03 Condition: Good used/working shape Fits: Husqvarna 50, 51, 55
husqvarna 240 chainsaw starter/recoil cover and pulley assembly
Part: starter cover with pulley and spring Condition: good used/working shape-has several broken grills Fits: Husqvarna 240
husqvarna 65L chainsaw ignition off switch and panel
Part: ignition off switch and panel Condition: good used/working shape-panel has an edge break Fits: Husqvarna 65 L
Husqvarna 61 Chainsaw Cylinder Plug
Part: Cylinder Plug Condition: Good used/working shape Fits: Husqvarna 61
Husqvarna 61 Chainsaw Filter Mount w/ Carb Bolts
Part: Filter mount w/ carb bolts Condition: Good used/working shape Fits: Husqvarna 61
husqvarna 266, 61 chainsaw pulley grip handle
Part: grip handle Condition: good used/working shape Fits: Husqvarna 61 266
Husqvarna 266 SE 48mm Chainsaw Piston, Ring, Bearing and Pin
Part: Piston, ring and bearing Condition: Good used/working shape Fits: Husqvarna 266 SE 48mm
Husqvarna 280 CP Chainsaw Top Cover Shroud
Part: CP Top cover shroud Condition: Good used/working shape. Has long hairline crack Fits: Husqvarna 280 CP
(2 in stock)
husqvarna 350 chainsaw inner and outer bar plate set
Part: inner and outer bar plate set Condition: good used/working shape Fits: Husqvarna 350
Husqvarna Practica 44 Chainsaw Bar Chain Tensioner Adjuster
Part: Bar chain tensioner adjuster 501 45 41-01, 501 54 63-01 Condition: Good used/working condition Fits: Husqvarna Practica 44, 444, 140, 140s and others
Husqvarna Practica 44 Chainsaw Intake Manifold
Part: Intake manifold Condition: good used/working condition Fits: Husqvarna Practica 44
(2 in stock)
Husqvarna 36, 41 Chainsaw Muffler
Part: muffler 530 06 94-15Condition: good used/working shapeFits: Husqvarna 36, 41. Jonsered 2036 2040
(1 in stock)
Husqvarna 36, 41 Chainsaw Muffler Heat Shield
Part: muffler heat shield Condition: good used/working shape Fits: Husqvarna 36, 41
(1 in stock)
Husqvarna 36, 41 Chainsaw air duct cleaner with turbo clean seal
Part: Intake air duct (air cleaner) pn 530-029813 & seal, pn 530-019203 Condition: good used/working shape Fits: Husqvarna 36, 41
husqvarna 272 xpg chainsaw rear trigger handle fuel tank assembly for heated handle
Part: rear trigger handle/fuel tank assembly with heated handle-includes (6) av mounts, throttle trigger, safety, switch, fuel cap, fuel line/filter Condition: good used/working shape with no breaks or leaks-has some paint loss Fits: Husqvarna 272 xpg
husqvarna 262 xp chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Husqvarna 262 XP
husqvarna 257 xp chainsaw flywheel and starter pawls
Part: flywheel and starter pawls 503 52 94-01 Condition: good used/working shape with no broken fins Fits: Husqvarna 257 XP
husqvarna 359, 357 xp chainsaw 5 piece av spring mount set
Part: 5 piece mount set Condition: good used/working shape Fits: Husqvarna 359, 357 XP
husqvarna 455 chainsaw u nut clip set of 3
Part: u nut, to mount top cover 503 22 69-02 Condition: good used/working shape Fits: Husqvarna 455
(3 in stock)
husqvarna 455 chainsaw choke link rod
Part: choke rod. 537 25 56-01 Condition: good used/working shape Fits: Husqvarna 455, 455 Rancher, 460
(2 in stock)
husqvarna 141, 136 chainsaw crankcase cover
Part: crankscase cover. Part # 530-052428 / 530052428 Condition: good used/working shape Fits: Husqvarna 141, 136
(3 in stock)
husqvarna 136, 141 chainsaw intake sleeve/boot
Part: intake sleeve. Part # 530029814 / 530-029814 Condition: good used/working shape Fits: Husqvarna 141, 136, 137, 142, Jonsered 2036, 2040
Husqvarna 285 Chainsaw Inner Bucking Spike type 2
Part: inner spike Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 285 Chainsaw Choke Button Link
Part: choke Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 246 Chainsaw Flywheel Cover Shroud
Part: flywheel cover 503 51 14-01 Condition: good used/working shape. May be orange or black. Fits: Husqvarna 246, 242, 42 Special
Partner B370 Husqvarna 36R Trimmer Wire 502 06 47-01
Part Number: 502 064701 Part Description: wire Fits the Following Models: Partner B370, Husqvarna 36R may also fit other models Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Box 39
Husqvarna K185 Choke Button 503 40 00-01 NEW
Part Number: 503 40 00-01 Part Description: choke button Fits the Following Models: Husqvarna K185, will also fit Partner models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Partner Box 38
Husqvarna 61, 266, 268 Chainsaw Bumper dog type 1
Part Name: bumper dawg / plate and bolts Fits the Following Models: Husqvarna 61 266 268 This is a USED part, in good working order.
(1 in stock)
Husqvarna 570, 575 Chainsaw Throttle Trigger & Safety
Throttle Trigger & Safety Good used shape Fits: Husqvarna 575, 570
(1 in stock)
Husqvarna 50 Rancher Chainsaw Intake Manifold & Boot
Part: intake manifold with the boot 501 77 11-01 Condition: good used/working shape Fits: Husqvarna 50 Rancher Special
Husqvarna 50 Rancher Chainsaw Fuel Tank Trigger Handle
Part: fuel tank trigger handle-includes the throttle trigger and safety Condition: good used/working shape-has some scuffing-especially on the bottom Fits: Husqvarna 50 Rancher
Husqvarna 50 Rancher chainsaw Bucking Spike and Bolts
Part: spike with bolts Condition: good used/working shape Fits: Husqvarna 50 Rancher
Husqvarna 44 Chainsaw Starter Pulley
Part Name: Starter Pulley Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(2 in stock)
Husqvarna 44 Chainsaw Choke Rod
Part Name: Choke Rod Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(3 in stock)
Husqvarna 44 444 Chainsaw Flywheel w/ Starter Pawls
Flywheel with starter pawls and springs. Fits Husqvarna 44 444 chainsaws. In good used shape with no cracks or broken fins. Flywheel has two key grooves. On Prufrex electronic ignition saws use the keyway marked P, on breaker-points ignition and bosch electronic igniton saws use the other keyway.
Husqvarna 44, 444, 140 Chainsaw Top Front Handle bar
Husqvarna 44, 444, 140 Top Front Handlebar. In good used shape, not cracked or bent. Some minor dings/gouges in the rubber gripping.
(3 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet
Part: carburetor adjust grommet Part # 501 62 86-01 Condition: cosmetically ugly but functional Fits: Husqvarna 42 Special 242
Husqvarna 42 Special Chainsaw AV Buffer Mount
Part Name: av buffer mountCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
Husqvarna 42 Special Chainsaw Air Filter (felt)
Part Name: air filter Condition: in good useable shape-no tears Fits the Following Models: Husqvarna 42 Special
Husqvarna 42 Special Air Conductor Flywheel Cover
Part Name: air conductor, flywheel coverCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
(1 in stock)
Husqvarna 394 Chainsaw Throttle Cable
Part: throttle cable 503 52 04-02 Condition: good used shape Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP
Husqvarna 394 Chainsaw Tank AV Spring Mount
Part Name: Tank AV Spring Mount 503 46 85-01 Condition: good used shape Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp
(1 in stock)
Husqvarna 36, 41 Chainsaw Crankshaft Engine Pan Bottom
Crankshaft bottom/engine pan Good used shape, no breaks Fits: Husqvarna 36, 41 Chainsaws
Husqvarna 36 41 Chainsaw U Nut Clip Set of 3
Part Name: u speed nut/clip set of 3Fits the Following Models: Husqvarna 36 41This is a USED part, in good working order.
(4 in stock)
Husqvarna 36 41 Chainsaw Chain Catcher Stop and Screw
Part Name: chain catcher 530-029850, 530 02 98-50 Fits the many saws including the following Models: Husqvarna 36, 41 Jonsered 2150, Poulan Pro 4620 This is a USED part, in good working order.
Husqvarna 36, 41 Chainsaw carb adaptor base
Part Name: carb adaptor/ manifold base mount. part # 530-037465 Fits the Following Models: Husqvarna 36, 41 This is a USED part, in good working order.
(1 in stock)
Husqvarna 359 Chainsaw Starter Pulley
Part Name: starter pulley 537 06 59-01 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 359, 357xp, 355. Jonsered 2156 2159 Turbo This is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Clutch Cover Sprocket Side
Part Name: clutch coverCondition Description: in good used shape-some minor chips/gougeson backside of the coverFits the Following Models: Husqvarna 357 XPThis is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Air Filter type 1 (flocked)
Part Name: flocked/felt air filter Condition Description: good used/working shape Fits the Following Models: Husqvarna 357 XP
Husqvarna 35 Chainsaw Flywheel with Starter Pawls
Husqvarna 35 flywheel with the starter pawls and springs. In nice used shape with no cracks or broken fins.
Husqvarna 285 Chainsaw Bucking Spike type 1
Part: bucking spike Condition: good used/working shape Fits: Husqvarna 285
Husqvarna 285 Chainsaw Bar/Chain Tensioner Adjuster
Part: chain tensioner Condition: good used/working shape Fits: Husqvarna 285 chainsaw
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #1 (with studs)
Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266
(1 in stock)
Husqvarna 262XP, 254 oil pickup line and filter
Oil line that mounts under the oil pump. Includes the filter on the end. Fits Husqvarna 262 xp, 254
Husqvarna 25R 24R Trimmer Boss 501 78 49-01 NEW
Part Number: 501 78 49-01Part Description: bossFits the Following Models: Husqvarna 24R 25R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 36 (Partner bin)
(1 in stock)
Husqvarna 254 Chainsaw 3/8-7 Clutch Rim Drum & Bearing
Part: 3/8-7 clutch drum, bearing and rim Condition: good used/working shape Fits: Husqvarna 254
(1 in stock)
Husqvarna 254 257 XP Chainsaw Clutch Mechanism
Part Name: Husqvarna 257 254 XP Chainsaw Clutch Mechanism Detailed Condition Description: nice used shape Fits the Following Models: 254 257 XP This is a USED part, in good working order.
(2 in stock)
Husqvarna 254, 257, 262, 261 Chainsaw Brake Dust Cover
Part Name: brake cover in used/working shape 501 87 50-01 Fits the Following Models: 254, 257, 261, 262, 262xp
Husqvarna 254 154 Chainsaw Starter Recoil Cover Only
Part Name: Starter recoil cover only.Part Description: In good useable shape-right corner of cover has several broken grills.Fits the Following Models: Husqvarna 254 and 154This is a used part.
Husqvarna 242 Chainsaw Pre Filter & Cover
Part Name: pre filter and cover Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 242 Chainsaw Clutch Set Mechanism
Part Name: clutch mechanism Condition: good used/working shape Fits: Husqvarna 242 chainsaws
(2 in stock)
Husqvarna 242 Chainsaw Clutch Rim Drum
Part Name: clutch rim drum Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 242 Chainsaw Bar/Chain Tensioner Adjuster
Part Name: chain tensioner Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 162 SG & SE heating stator element
Part: coil heating stator element Condition: good used, working shape, tested and works Fits: Husqvarna 162 SE & SG
(1 in stock)
Husqvarna 142 Chainsaw Oil Pump Oiler Assembly
Part Name: oil pump assembly 530014410, 530 01 44-10 Condition Description: in good working shape Fits the Following Models: Husqvarna 142 137 136 141 36 41 This is a USED part, in good working order.
Husqvarna 142 Chainsaw Cover and Screw
Part Name: cover and screw 530052428, 530 05 24-28 Condition Description: in good used shape-no breaks-faded Fits the Following Models: Husqvarna 142 This is a USED part, in good working order.
husqvarna 335 xpt chainsaw wire cable assembly new oem 503 86 44-01 (H-58)
Part: off switch wires. Part # 503 86 44-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 335xpt
husqvarna 357, 359 xp and jonsered 2159 chainsaw filter mount clip PN 503 96 27-01 new oem (H-58)
Part: filter mount clip. PN 503 96 27-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 357xp, 359xp, Jonsered 2159 2156 turbo and some other models. And some other models
Husqvarna 51, 55 Chainsaw Filter Base Mount 503 89 80 New OEM (H-1001)
Part Name: air filter base mount. Part # 503 89 80 condition: new old stock from closed out dealer. Fits the Following Models: Husqvarna 51, 55
Husqvarna 261 262 XP Chainsaw Throttle Trigger
Part Name: throttle trigger Part Description: good used shape-no breaks Fits the Following Models: Husqvarna 261 262 XP This is a used part.
(1 in stock)
Husqvarna 372xp Chainsaw Chain Tensioner Kit 537 04 41-02 NEW OEM (H-66)
Chain tensioner adjuster screw with special adjusting nut, plastic dust cover, worm gear, o rings and all. 537 04 41-02 New OEM from closed out dealer. Fits: 390 XP Special, 372XP, 385XP, 390XP, 365 Special, Jonsered 2165 2171 2186 2188 Turbo
Husqvarna 357xp Chainsaw Auto Valve decompression valve
Automatic compression release valve Decompression Valve Husqvarna 537126803 537 12 68-03 Superseded to 537126805 537 12 68-05 In good used shape Fits 357 XP 359 334t 338xpt with auto valve cylinders
Husqvarna chainsaw 445e 450e new OEM starter recoil housing ASSY (mgsfy)
part: Husqvarna chainsaw 445e 450e new OEM starter recoil housing ASSY condition: new oem part# 544158502, 544 15 85-02
Husqvarna 254, 154 Chainsaw Top Cylinder Cover/Shroud 501 86 95 type 2 new OEM (MGSFU)
Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Dirty and a little scuffed from years of storage. Fits: Husqvarna 254
Husqvarna 281 Chainsaw 52mm Cylinder new OEM part of 503 50 29-01 (upstairs)
Part: 52mm bore OEM cylinder. Part of the complete kit part number 5035029001 Condition: new old stock from closed out dealer. Fits: Husqvarna 181, 281 SE SG
Husqvarna 372xp Chainsaw Cylinder 50mm Mahle new oem 503 62 64-72 (UPSTAIRS)
OEM Mahle cylinder. 50mm bore. 503626472 sans piston 50ZK6 New old stock from closed out dealer. Fits Husqvarna 371, 371xp, 372, 372xp. Jonsered 2171, 2071 Turbo. Can be retrofit onto 365 Husqvarna and 2165, 2065 Jonsered as an upgrade.
Husqvarna 266 XP chainsaw cylinder #2
Cylinder 50mm bore Mahle. 50ZN11 501 68 55-71 In good used shape. Some broken fins. Fits some Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
husqvarna 262xp chainsaw air filter cover #2
Part: air filter cover, part # 503 54 23-01 Condition: good used/working shape kinda scruffy. Scuffs, fades, no cracks Fits: came off a Husqvarna 262 xp, will also fit 261
Husqvarna 261, 262xp chainsaw walbro hda120 carburetor
Part: walbro HDA120 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 262 xp, 261
(3 in stock)
husqvarna 359, 357xp, 346xp chainsaw throttle trigger pin 720 18 25-20 (h-57)
Part: throttle trigger pin. 720182520 Condition: new old stock from closed out dealer. Fits: Husqvarna 359, 357 XP, 346 xp, 353, 351, 350, 340, 345 and others
Husqvarna 266se chainsaw case bolts
Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se
OEM Husqvarna 365 - 390xp Chainsaw Cylinder Top Cover Grommet (h-56)
Rubber grommet for the top cover resting on the cylinder head. 537 01 65-01, 537016501 new OEM Fits Husqvarna 362 365 Special 362sp 365sp 365xt 371 372 371xp 372xp 385xp 390xp 385 390. Jonsered 2063 2065 2071 2163 2165 2171 2166 2172 2188 2186 turbo. And others
husqvarna 262 chainsaw 48mm piston kit new oem 503 53 11-71 #2 (upstairs)
Part: 48mm piston kit, includes the wrist pin, ring, and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262
Husqvarna 343F trimmer Piston Kit 537 15 94-02 NEW oem (upstairs)
Part Number: 537159402 Part Description: piston with rings, wrist pin, and keepers Fits the Following Models: 343F, 343FR, 343R, 345FX, 345FXT, 345R, 345RX Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Husqvarna 371 chainsaw 50mm piston 503 69 12-71 new OEM (upstairs)
50mm piston with ring, wrist pin, and one keeper clip. 503 69 12-71 New old stock from closed out dealer. Fits Husqvarna 371, 371XP. 372xp, 371xp, 371 372 XP XPG. Jonsered 2171, 2071 Turbo
husqvarna 350, 351 chainsaw 44mm piston kit new OEM 503 89 96-03 #3 (upstairs)
Part: 44mm piston kit - includes wrist pin and clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.
(1 in stock)
husqvarna 357xp chainsaw 46mm piston kit new oem 537 21 96-02 (upstairs)
46mm bore A/B piston with wrist pin . NO RING. Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo
husqvarna 262 chainsaw 48mm piston kit new oem 503 53 11-71 (upstairs)
Part: 48mm piston kit, includes the wrist pin and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262
husqvarna 50 chainsaw piston and cylinder set new OEM #1 503 96 84-71 (upstairs)
Part: 44mm diameter bore top end. Includes: cylinder, piston, ring, wrist pin, clips and bearing. 503968471 Condition: new old stock from closed out dealer. Fits: Husqvarna 50, 50 Rancher Special or Practica
Husqvarna 225r trimmer OEM walbro ignition coil 537 03 85-01 (A588)
Ignition module coil pn# 537038501 new old stock from closed out dealer. Husqvarna 225 r