Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.

husqvarna 136 chainsaw starter recoil cover only
Part: starter housing cover Condition: good used/working shape Fits: Husqvarna 136
(2 in stock)

husqvarna 36, 41 chainsaw rear trigger handle fuel tank #2
Part: fuel tank rear trigger handle. Includes the 6 av buffer mounts. Does NOT include any of the trigger parts Condition: good used/working shape. Has some scuffing. Fits: Husqvarna 36, 41

husqvarna 181 chainsaw brake tension spring, pawl +
Part: brake tensioner spring and pawl with hardware pictured Condition: good used/working shape Fits: Husqvarna 181

husqvarna 181 chainsaw old style metal brake handle
Part: metal brake handle guard Condition: in good used shape Fits: older Husqvarna 181 models
(1 in stock)

husqvarna 41 chainsaw shortblock kit - piston, cylinder +
Part: piston and cylinder with crankshaft, connecting rod, engine cap Condition: good used/working shape. Came off a saw with good compression. Fits: Husqvarna 41, 141 Jonsered 2040

husqvarna 235, 230 chainsaw gear cover
Part: gear cover and screw. Part # 545-059201 Condition: good used/working shape Fits: Husqvarna 235, 230

husqvarna 50 chainsaw carb bolt set
Part: set of carburetor bolts/ screws Condition: good used/working shape Fits: Husqvarna 50

husqvarna 362 chainsaw carb housing base
Part: carburetor housing base Condition: good used/working shape Fits: Husqvarna 362
(1 in stock)

husqvarna 65l chainsaw starter spring shield
Part: spring shield / protection washer part # 501 40 21-01 Condition: good used/working shape Fits: Husqvarna 65 L

husqvarna 44 chainsaw muffler bracket
Part: muffler bracket, pn 501 57 44-01 Condition: good used/working shape Fits: Husqvarna 44

husqvarna 288, 281 chainsaw flywheel only
Part: flywheel only, part # 501 80 22-01 Condition: good used/working shape. No broken fins Fits: Husqvarna 288, 281

husqvarna 162 se chainsaw flywheel side crankcase half
Part: flywheel side crank case half Condition: good used/working shape Fits: Husqvarna 162se

husqvarna 570, 575 xp chainsaw off switch contact spring
Part: contact spring, part # 503 86 97-02 Condition: good used/working shape Fits: Husqvarna 570, 575xp
(1 in stock)

husqvarna 570, 575 xp chainsaw ground wire
Part: ground stop wire, part # 537 20 87-01 Condition: good used/working shape Fits: Husqvarna 570, 575xp
(2 in stock)

husqvarna 575 xp chainsaw spike type 2 pn 537 01 71-01
Part: bucking spike, part # 537 01 71 01 Condition: good used/working shape Fits: Husqvarna 575 xp and some other models
(2 in stock)

husqvarna 570, 575 xp chainsaw oil filter and line
Part: oil pickup filter (501 54 41-02) and line hose (501 89 53-01) Condition: good used/working shape Fits: Husqvarna 570, 575xp

husqvarna 575 xp chainsaw case bolts set of 6
Part: set of 6 case bolts / screws Condition: good used/working shape Fits: Husqvarna 575xp

husqvarna 575 xp chainsaw crankshaft bearing used
Part: crank shaft ball bearing 738 22 02-25 Condition: good used/working shape Fits: Husqvarna 575xp

husqvarna 61 chainsaw cover grommet
Part: cover grommet Condition: good used/working shape Fits: Husqvarna 61

husqvarna 36, 41 chainsaw tank shock mount
Part: tank av buffer mount, part # 530 02 99-84 Condition: good used/working shape Fits: Husqvarna 36, 41

husqvarna 50 chainsaw old style chainbrake parts lot
Part: brake parts for the chainbrake- lever arm, spring and hardware pictured Condition: good used/working shape Fits: old style (early) Husqvarna 50 models
(1 in stock)

husqvarna 357, 359 xp chainsaw fuel line and filter
Part: fuel line and filter Condition: good used/working shape Fits: Husqvarna 357xp, 359xp

husqvarna 261, 262 chainsaw clutch shoe used
Part: (1) clutch shoe Condition: good used/working shape Fits: Husqvarna 261, 262
(2 in stock)

husqvarna 266 chainsaw (1) bar guide bolt
Part: 1 bar stud/bolt Condition: good used/working shape Fits: Husqvarna 266

husqvarna 480 cd chainsaw carb bolt set
Part: set of carburetor bolts Condition: good used/working shape Fits: Husqvarna 480cd

husqvarna 2100 chainsaw starter spring shield
Part:spring shield Condition: Good used/working shape Fits: Husqvarna 2100

husqvarna 2100 chainsaw flywheel spring
Part:(1) flywheel starter spring Condition: Good used/working shape Fits: Husqvarna 2100

husqvarna 480 cd chainsaw crankcase housing half (clutch side)
Part: clutch side crank case engine housing half with bar studs Condition: good used/working shape. Has chipping/oxidation in metal but is in usable shape with no breaks. Fits: Husqvarna 480cd

husqvarna 480 cd chainsaw crankcase housing half (flywheel side)
Part: flywheel side crank case engine housing half Condition: good used/working shape Fits: Husqvarna 480cd

husqvarna 288, 281 chainsaw worm gear new replaces pn 503 55 75-01 ( H-23 bin)
Part: oil pump worm gear wheel, replaces Husqvarna Part # 503 55 75 01 Condition: new after-market part Fits: Husqvarna 288, 281, 394 Location: Husky H-23 bin

husqvarna 575 xp chainsaw bucking spike type 1
Part: bucking spike dawg. PN 501 92 27-01 E Condition: good used/working shape Fits: Husqvarna 575xp and some other models
(1 in stock)

husqvarna 575 xp chainsaw chip guard
Part: chip/dust guard. PN 537 17 41-01 Condition: good used/working shape Fits: Husqvarna 575xp

husqvarna 570, 575 xp chainsaw bar chain tensioner assembly
Part: chain tensioner screw and adjusting nut with hardware, part # 537 04 41-02 Condition: good used/working shape Fits: Husqvarna 570, 575xp

husqvarna 266 chainsaw fine thread clutch carrier rotor
Part: clutch spider / carrier Condition: good used/working shape Fits: Husqvarna 266xp, 266 xp

husqvarna 266 chainsaw ignition coil
Part: ignition coil Condition: Tested and makes strong spark. One wire is cut off at end and wire insulation over both wires is missing/coming off Fits: Husqvarna 266

husqvarna 141 chainsaw clutch shoe
Part: (1) clutch shoe Condition: good used/working shape Fits: Husqvarna 141

husqvarna 40, 45 chainsaw guide used pn 503 74 81-01
Part: guide Condition: good used/working shape Fits: Husqvarna 40, 45
(2 in stock)

husqvarna 357, 359 xp, 353 chainsaw brake part used pn 537 08 90-01
Part: brake part, part # 537 09 90 01 Condition: good used/working shape Fits: Husqvarna 357xp, 359xp, 353
(4 in stock)

husqvarna practica 40 chainsaw small av buffer mount
Part: small av buffer mount 501 46 31-01 Condition: good used/working shape Fits: Husqvarna Practica 40 44 444 240s 240 140s 340s and others

husqvarna practica 40 chainsaw fuel tank rear trigger handle
Part: bare bones fuel tank/rear trigger handle Condition: good used/working shape with no leaks. The handle has some melting. Fits: Husqvarna Practica 40

husqvarna 36, 41 chainsaw crankshaft and rod #2 *with seals*
Part: crank shaft with connecting, rod, rod bearing, main bearings, seals and crankcase pan Condition: good used/working shape Fits: Husqvarna 36, 41

husqvarna practica 40 chainsaw cylinder
Part: cylinder Condition: the 2nd cooling fin has some breaks but cylinder is in usable shape with a smooth bore Fits: Husqvarna Practica 40

husqvarna practica 40 chainsaw starter rewind spring
Part: starter rewind spring Condition: good used/working shape Fits: Husqvarna Practica 40

husqvarna 30, 35 chainsaw choke rod
PART: choke rod CONDITION: good used/working shape Fits: Husqvarna Husky 30, 35
(1 in stock)

husqvarna practica 40 chainsaw crankcase tank #2
Part: crank case tank Condition: good used/working shape. No leaks. Fits: Husqvarna Practica 40

husqvarna 36, 41 chainsaw clutch sprocket assembly
Part: clutch- includes the spur sprocket drum, mechanism and bearing Condition: good used/working shape Fits: Husqvarna 36, 41
(2 in stock)

Husqvarna 346 XP Chainsaw Decompression Valve
Part: Husky 346 XP Decompression Valve Condition: good used/working shape

Husqvarna 32 Chainsaw Drive Gear
Part: Husky 32 Drive Gear Condition: good used/working shape

Husqvarna 32 Chainsaw Oil Line
Part: Husky 32 Oil Line Condition: good used/working shape

Husqvarna 32 Chainsaw Throttle Trigger & Safety Set
Part: Husky 32 Throttle Trigger & Safety lever with Link Condition: good used/working shape

Husqvarna 32 Chainsaw Starter Recoil Cover
Part: Husky 32 Housing Cover with Pulley & Spring Condition: good used/working shape

Husqvarna 32 Chainsaw Clutch Assembly
Part: Husky 32 Clutch Assembly includes Sproket Drum & Mechanism Condition: good used/working shape

Husqvarna 32 Chainsaw Gas & Oil Cap Set
Part: Husky 32 Gas & Oil Cap Set Condition: good used/working shape

Husqvarna 32 Chainsaw Oil Pump & Drive Gear
Part: Husky 32 Oil Pump & Drive Gear Condition: good used/working shape

Husqvarna 32 Chainsaw Bar Nut
Part: Husky 32 Bar Nut Condition: good used/working shape

Husqvarna 32 Chainsaw Handguard
Part: Husky 32 Hand Guard Handle Condition: good used/working shape

Husqvarna 32 Chainsaw Carburetor Walbro HDC L29
Part: Husky 32 Carb Walbro HDC L 29 Condition: good used physical shape. May need a carb rebuild kit.

husqvarna practica 40 chainsaw muffler type 1
Part:muffler with bracket and gasket Condition: good used/working shape Fits: Husqvarna Practica 40

Husqvarna 32 Chainsaw Oil Pump Cover
Part: Husky 32 Oil Pump Cover Condition: good used/working shape

Husqvarna 32 Chainsaw Piston & Cylinder Kit
Part: Husqvarna 32 shortblock. Includes the piston, piston ring, cylinder, crankshaft, crank connecting rod, bearings. Condition: good used/working shape. Came off a saw with good compression. No broken fins.

Husqvarna Husky 32 Chainsaw Top Handle Fuel Tank Cover
Part: Husqvarna 32 Top Handle Fuel Tank Cover Condition: good used/working shape.

Husqvarna Gasket PN 504 352501 (Bin 505)
Part: Husqvarna Gasket Part Number: 504 35 25 01 Condition: New old stock part. May be dusty/dirty from years of storage. Location Box: 505

husqvarna 268 chainsaw flywheel cover shroud
Part: flywheel cover conductor Condition: good used/working shape Fits: Husqvarna 268

husqvarna 575 xp chainsaw grommet pn 537 20 38-01 used
Part: grommet 537 20 38 01 Condition: good used/working shape Fits: Husqvarna 575xp, 570, 576xp
(1 in stock)

husqvarna 50, 51, 55 chainsaw switch wire
Part: switch wire Condition: good used/working shape Fits: Husqvarna 50, 51, 55

husqvarna 266 SE chainsaw brake spring, bolt and lever
Part: brake spring, lever and spring Condition: good used/working shape Fits: Husqvarna 266se

husqvarna 371, 372 chainsaw filter mount bolt set
Part: set of bolts for the filter mount Condition: good used/working shape Fits: Husqvarna 371, 372

husqvarna 371, 372 xp chainsaw guide bar adjust pin
Part: adjustment pin Condition: good used/working shape Fits: Husqvarna 371, 372 xp

husqvarna 362 xp chainsaw igniton coil
Part: ignition coil head only Condition: good used/working shape. Tested and works with strong spark. Fits: Husqvarna 362 xp
(3 in stock)

husqvarna 285 chainsaw chain guide used
Part: chain guide Condition: good used/working shape Fits: Husqvarna 285

husqvarna 285 chainsaw piston ring set
Part: set of piston rings Condition: good used/working shape Fits: Husqvarna 285

husqvarna 36, 41 chainsaw bar chain tensioner adjuster
Part: tensioning screw and adjusting nut Condition: good used/working shape Fits: Husqvarna 36, 41

husqvarna 141, 136 chainsaw chain catcher stop
Part: chain catcher stop Condition: good used/working shape Fits: Husqvarna 141, 136

husqvarna 288 chainsaw brake tension spring
Part: brake tension spring Condition: good used/working shape Fits: Husqvarna 288

husqvarna 380 chainsaw flywheel and starter pawls
Part: flywheel with starter pawl set Condition: good used/working shape Fits: Husqvarna 380

husqvarna 22 chainsaw choke pull rod (misc bin)
Part: choke pull rod Condition: good used/working shape Fits: Husqvarna 22

husqvarna 285 chainsaw fuel line and filter
Part: fuel hose line with fuel filter Condition: good used/working shape Fits: Husqvarna 285

husqvarna 22 chainsaw starter pulley (misc bin)
Part: starter pulley Condition: good used/working shape Fits: Husqvarna 22
(2 in stock)

husqvarna 154, 254 chainsaw gasket
Part: gasket. part # 501 86 21-02 Fits: Husqvarna 154, 254 Condition: good used/working shape

Husqvarna 281, 288 chainsaw recoil/ rewind spring and starter pulley
Part: Recoil spring and starter pulley 503 10 24-01 Condition: Good used/ working shape Fits: Husqvarna 281, 288
(1 in stock)

husqvarna 385, 365 + chainsaw spring pn 501 61 58-01 new (box H-45)
Part: oil pump spring Part # 501 61 58 01 Condition: new old stock OEM part. Dirty/dusty from years of storage. Fits: Husqvarna 385, 390, 365 and some other models Location: box H-45
(2 in stock)

husqvarna 394, 395 chainsaw av spring mount hard pn 503 46 95-02 new (h-45)
Part: antivibe element / av spring mount Part # 503 46 95 02 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395 Location: Box H-45

husqvarna 394, 395 chainsw worm drive gear pn 503 55 75-01 new (box H-43)
Part: worm wheel drive gear Part # 503 55 75 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 394, 395 Location: Box H-43

husqvarna 51, 55 chainsaw top cover engine shroud pn 503 60 90-06 new (buky bin-1001)
Part: top cover cylinder shroud Part # 503 60 90 06 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 51, 55 ...
(1 in stock)

husqvarna trimmer triangle blade shield pn 502 26 23-01 new (bulky-1001 bin)
Part: triangle blade shield Part # 502 26 23 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 232R, 235R, 240R, 245R, 143R and some other trimmer mo...
(1 in stock)

husqvarna 480, 285 chainsaw lower handle plate pn 501 56 91-01 new (box H-42)
Part: lower handle plate Part # 501 56 91 01 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 285, 480 Location: Box H-42

husqvarna 371, 372, 362, 365 & Jonsered 2065, 2071 + chainsaw starter pawl pn 503 85 95-01 new OEM (box H-40)
Part: (1) starter pawl Part # 503 85 95 01 Condition: new old stock part. Dusty/dirty from years of storage. Fits: Husqvarna 371, 372, 365, 362. Jonsered 2071, 2065, 2063 ...

husqvarna 36, 41 chainsaw air filter bottom
Part: filter bottom base - pn 530-036582 Condition: good used/working shape Fits:Husqvarna 36, 41, 136

husqvarna 40, 45 chainsaw bar nut set
Part: set of bar nuts Condition: good used/working shape Fits: Husqvarna 40, 45

husqvarna 40, 45 chainsaw av spring mount #3 with hardware
Part: av spring mount with tie strap, screws, and cover Condition: good used/working shape Fits: Husqvarna 40, 45

husqvarna 285 chainsaw pre screen filter
Part: pre screen filter Condition: good used/working shape Fits: Husqvarna 285

husqvarna 372 xp chainsaw clutch sprocket assembly #2
Part:clutch - includes the sprocket, mechanism and bearing Condition: good used/working shape Fits: Husqvarna 372 xp

husqvarna 288, 281 chainsaw muffler bracket
Part: muffler bracket 501 81 79-01 Condition: good used/working shape Fits: Husqvarna 281, 288, 288xp, 281se, and others

husqvarna 285 chainsaw muffler parts
Part: muffler parts: includes the flame protector cup, plate, bracket & bolts and some hardware Condition: good used/working shape Fits: Husqvarna 285

husqvarna 268 chainsaw muffler heat shield
Part: heat shield Condition: good used/working shape Fits: Husqvarna 268

husqvarna 266, 268, 272 chainsaw fuel cap only (late model, no keeper)
Part: fuel cap only - late model type (newer) pn 501 27 82-01 Condition: good used/working shape Fits: Husqvarna 266,, 268, 272

husqvarna 371, 372 xp chainsaw pulley grip handle
Part: starter pulley grip Condition: good used/working shape Fits: Husqvarna 371, 372 xp

husqvarna 162 chainsaw oil line and filte
Part: oil line and oil filter Condition: good used/working shape Fits: Husqvarna 162
(2 in stock)

husqvarna 242 chainsaw nut pn 731 23 18-01 new (bin H-51)
Part: nut Part # 731 23 18 01 Condition: new old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 242. May also fit other models Location: Box H-51