Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.

Husqvarna 562XP Chainsaw Fuel Tank Handle 575 38 22-01
Fuel tank, rear trigger handle assembly. Includes 1 mount, throttle cable, tank vent, trigger and safety interlock. 575 38 22-01, 575 38 22-05, 575382205 505 12 40 5051240 Good used shape Fits Husqvarna 555 562 xp 562xp

Husqvarna 36, 41, 136, 141 Chainsaw Heat Insulator NEW 530 03 76-52 (H-0013)
Heat insulator. 530037652 New part from old dealer stock Fits Husqvarna chainsaw models: 36, 41, 136, 141

Husqvarna 357 xp, 359 Chainsaw Carburetor Gasket NEW 503 96 76-01 (H-0013)
Carb gasket. 503967601 New part from old dealer stock Fits Husqvarna chainsaw models: 357xp, 359,

Husqvarna 288, 281, 298 Chainsaw V-Ring NEW 501 27 74-01 (H-0013)
V Ring. 501277401 New part from old dealer stock Fits Husqvarna chainsaw models: 282, 288, 298, 65L, 2100, 285 CD, 2101
(1 in stock)

Husqvarna 61, 298, 2100 Chainsaw Starter Bushing NEW 501 55 60-01 (H-0011)
Starter bushing. 501556001 New part from old dealer stock Fits Husqvarna 61, 298, 2100, 2101, 44, 444, 266, 268

Husqvarna 372xp Chainsaw Chain Adjuster Screw NEW 537 07 95-02 (H-0010)
Chain tensioner adjuster screw. 537079502 New part from old dealer stock Fits Husqvarna 372 365 385 390 XP Special, 372XP, 385XP, 390XP, 365 Special, Jonsered 2165 2171 2186 2188 Turbo

Husqvarna 181-288 Chainsaw Carburetor Sleeve NEW 501 80 69-01 (H-0010)
Carb sleeve/grommet. 501806901 New part from old dealer stock Fits Husqvarna chainsaw models: 181, 281, 288
(1 in stock)

Husqvarna Visor Linkage Kit NEW 965 10 00-50 (H-0010)
Husqvarna visor linkage kit. 965100050 New part from old dealer stock

Husqvarna 61 - 288xp Chainsaw Fuel Tank Vent 501 62 96-01 NEW (N002)
Fuel gas tank vent valve assembly. 501629601 NEW from old dealer stock Fits some models of Husqvarna 61 266 266se 266xp 268xp 268 272xp 272 181 181se 288 288xp 281

Husqvarna 55 - 288xp Chainsaw Stop Switch 503 08 97-02 NEW (N002)
Stop kill switch assembly. 503089702 NEW from old dealer stock Fits many Husqvarna chainsaw models 51 55 261 257 254xp 262xp 266xp 61 268 268xp 272 272xp 281 288xp and others

Husqvarna 44 - 162SE Chainsaw Vented Oil Cap 501 56 41-01 NEW (H-10)
Vented, small diameter oil filler cap. 501564101 NEW from old dealer stock Fits many older models of Husqvarna 162se 162sg 61 Rancher Practica 44 444 40 Rancher

Husqvarna 3120XP Chainsaw Hand Guard 503 13 67-03 NEW (HAB-1)
Chainbrake brake handle handguard. 503136703, 503136702, 503136701, 503 13 67-01 NEW old stock part from closed out dealer Fits Husqvarna 3120 xp 3120xp models

Husqvarna 266xp Chainsaw Flywheel Shroud 501 52 61-02 NEW (D900)
Flywheel shroud air conductor. 501526102 NEW from old dealer stock Fits Husqvarna 162se 162 se 61 266se 266xp 268 with the 2pc ignition. Also fits Jonsered 630 with 2pc ignition.

Husqvarna 272xp Chainsaw Nylon HD Air Filter 503 55 11-02 NEW (UNH-003)
Cleanable nylon filter element. XPW West coast HD clamp on air filter. NEW from old dealer stock Fits 272XP 272XPW 272 XP West Coast

Husqvarna 65L Chainsaw Bar Plate Set
Inner and outer chain bar guide plates. 501 24 41-01, 501 24 42-01 In good used shape Fits Husqvarna 65 77 L 65l 77l
(2 in stock)
Husqvarna 562xp Chainsaw Top Cover
Top cylinder cover shroud. 522959601, 522 95 96-01 In good used shape. Scuffed, dinged, and may have pitch. Fits Husqvarna 562 xp xpg 562xp
Husqvarna 550xp Chainsaw Ignition Coil 581 72 36-02 (HAB-1)
Electronic ignition module. 581 72 36-02, 577 79 07-01, 577790701, 581723602 NEW Fits Jonsered CS 2252 2253 CS2252 CS2253 Turbo. Husqvarna 545 550xp 550 xp
Husqvarna 562xp Chainsaw Updated Muffler Assembly 581 91 48-01 NEW (BHSJP)
Improved muffler exhaust assembly kit. 581914801, 581 91 48-01, 510 00 14-02, 510001402 NEW Fits Husqvarna 560 562xp, 555. Jonsered 2258 2260 Turbo
Husqvarna 550xp Chainsaw Top Handle 577 79 82-01 (HAB-1)
Cylinder head to top handle AV buffer mount antivibration element spring. 522951501, 522 95 15-01 NEW Fits Husqvarna 545, 550xp.
Husqvarna 550xp Chainsaw Cylinder AV Spring Mount 522 95 15-01 (HAB-1)
Cylinder head to top handle AV buffer mount antivibration element spring. 522951501, 522 95 15-01 NEW Fits Husqvarna 545, 550xp. Jonsered 2252 2253 Turbo
Husqvarna 575xp Chainsaw Carburetor 544 19 98-01 NEW (HAB1)
ZAMA C1M Carb carburetor assembly. 544199801, 544 19 98-01, 503283301, 503 28 33-01, 580 73 58-01 NEW Fits Husqvarna 570 575xp 575xpg 576xp 576xpg 575 576 xp xpg. Will not work with Autotune models.
Husqvarna T540 Chainsaw Air Filter 574 45 31-04 NEW (H-47)
Nylon air filter assembly. 574 45 31-04, 574453104 NEW Fits Husqvarna T540XP, T540 XP, T 540
Husqvarna 562XP Chainsaw Carburetor 579 19 41-01 NEW (H-55)
ZAMA EL44 Carburetor 'kit'. 579 19 41-01, 579194101 NEW Fits Husqvarna 555 562xp 562 xp. Jonsered 2258 2260 Turbo
Husqvarna 562XP Chainsaw Piston and Cylinder Kit 575 35 58-05 NEW (H-34)
Top end motor kit includes: cylinder, piston, ring, wrist pin, small end pin bearing and keepers. 575355805, 575 35 58-05, 575 35 58-01, 575355801 NEW Fits Husqvarna 555 562 562xp AT. Jonsered 2258 2260 Turbo
Husqvarna 346xp Chainsaw Late Model Bar Plate 503 87 56-01 NEW (MJR)
Inner oil pump cover, bar plate, crankcase shield. 503875601, 503 87 56-01 NEW Fits later model 346xp 346 xp xpg 353. Jonsered 2153 Turbo
Husqvarna 550xp Chainsaw Brake Handle
Hand guard, chainbrake handle. 522 67 75-01 5052009 In good used shape Fits Husqvarna 545 550xp 550 xp xpg
(4 in stock)
Husqvarna 562 XP Chainsaw Upper Muffler Washer 577 65 63-01 NEW (H-17)
Upper muffler bolt sleeve exhaust washer spacer. 576 95 52-01, 576955201, 577 65 63-01, 577656301 NEW Fits Husqvarna 562XP 555 Autotune, Jonsered 2260 2258 Turbo
Husqvarna 266xp Chainsaw Oil Pump Worm Gear Washer
Washer that goes behind the plastic oil pump worm drive gear. 503 23 00-13 In good used shape Fits Jonsered Jonsereds 630 625 670 series Super Champ Etc. Husqvarna 61 rancher practica, 162se, 162 se sg, 66, 266se, 266xp, 266 xp, 268xp, 268, 272xp, 272.
Husqvarna 562XP Chainsaw Fuel Tank Handle 575 38 22-01 NEW
Fuel tank, rear trigger handle assembly. 575 38 22-01, 575 38 22-05, 575382205 NEW Fits Husqvarna 555 562 xp 562xp
Husqvarna 480CD Chainsaw Carburetor
Tillotson HS205A HS205 a Carb assembly. 501 67 65-01 In good physical used shape. May or may not need fresh diaphragms installed. Fits Husqvarna 480cd 480 cd
Husqvarna 480cd chainsaw flywheel assembly (new style, sem)
Part: flywheel magneto with starter pawls, springs, studs. Condition: good used/working order with no broken fins Fits: Husqvarna 480 380 CD 380cd 480cd models with SEM type GA systems
(1 in stock)
Husqvarna 575xp Chainsaw Tank AV spring mount
Side av buffer spring handle mount for the gas tank. STD. 537 21 03-01 In good used shape Fits Husqvarna 570 575xp 576xp 575 576 xp

Husqvarna 455 rancher chainsaw throttle trigger
Part: throttle trigger Part # 537 26 05-01 Condition: good used/working shape Fits: Husqvarna 455 rancher, 460
Husqvarna 44 Chainsaw Top Cover Shroud
Part: Top cover shroud Condition: Good used/working condition Fits: Husqvarna 44
(1 in stock)
Husqvarna 262xp Chainsaw Top Handle Cushion Sleeve
Rubber cushion sleeve for the top handle. 503 54 61-02 In good used shape Fits Husqvarna 254xp 254se 254 se xp 257 261 262 262xp
Husqvarna 2100CD Chainsaw Felling Spike
Large inner felling spike dog. 501 61 00-01 In good used shape Fits Husqvarna 2100 2100CD 2100xp 298xp 285cd 285 298 1100 cd xp and others
Husqvarna 395xp Chainsaw Cover Clip
Top cover buckle clip. 503 54 35-04 In good used shape Fits Husqvarna 394xp 395xp 394 395 xp xpg
(1 in stock)

Husqvarna 372xp chainsaw brake spring guide
Part: 503 79 27-01 nylon chainbrake actuating spring guide Condition: good used/working shape Location: Husqvarna 570, 575xp, 576xp, 365 362 Special 371xp 372xp 371 372 xp xpg, Jonsered 2063 2065 2071 2163 2165 2171 2166 2172 Turbo and others.
Husqvarna 346xp Chainsaw Oil Cap
Bar oil reservoir cap. 537 28 15-02 In good used shape Fits Husqvarna 346xp 351 353 346 xp xpg
(2 in stock)
Husqvarna 385xp Chainsaw Wrist Pin Bearing 501 81 74-01 NEW (A588)
Small end rod, wrist pin needle bearing. 501 81 74-01 503 25 61-01 NEW Fits Husqvarna 385 390 288 XP 390xp. Jonsered 2095 2186 2188 Turbo. And, others
Husqvarna 372 Chainsaw Rubber Carburetor Support Piece
Carburetor support 503 67 86-01 Good used/ Usable Husqvarna 372, 371, 365, Jonsered 2171, 2165
Husqvarna 262xp Chainsaw Tool Compartment Door
Door cover for small tool compartment in the rear tank trigger handle In good used shape Fits Husqvarna 262 xp
Husqvarna 340 445 E Chainsaw Starter Dampening Spring 537 42 34-01 NEW (H-17)
Shock dampening spring for the starter pulley and cog. 537 42 34-01 NEW Fits E EZ Easy start series Husqvarna 340E 340 345e 445e 445 440 450 E. Jonsered 2245, 2240 Turbo
Husqvarna 285 chainsaw buffer protecting cup
Part: Tank av buffer mount protecting cup Part # 501 68 08 01 Condition: in good used shape Fits: Husqvarna 480, 285, 2100, 2100cd, 285cd, 480cd and others
Husqvarna 394 Chainsaw Low Air Filter Cover
Low rise standard air filter cover 503 52 65-02 In good used shape Fits 394xp, 394 xp with the low air filter
Husqvarna 285cd Chainsaw Flywheel with fan
Flywheel rotor with fan for Bosch ignition. 501 61 28-01 In good used shape Fits Husqvarna 285 CD and others
husqvarna 288, 281 chainsaw fuel tank rear trigger handle w/ trigger parts
Part: fuel tank rear trigger handle, with throttle trigger parts and av mounts Condition: good used/working shape. No leaks. Fits: Husqvarna 288, 281 SE SG, 288XP lite
husqvarna 575 xp chainsaw piston and cylinder set
Top end motor kit includes: cylinder head, piston, rings, wrist pin, keeper clips. 537 25 41 20 In good used shape Fits: Husqvarna 575xp, will also fit in a 570 model
husqvarna 261, 262 xp chainsaw starter recoil cover only
Part: starter cover only pn#503 54 17-01 Condition: good used/working shape. Fits: Husqvarna 261, 262xp ID tag may vary in cosmetic detail and numbering
Husqvarna 346xp Chainsaw Air Filter Clip
Air filter hold down clip 537 39 31-02 In good used shape Fits Husqvarna 346xp, 353 and others

Husqvarna 61 Chainsaw Old Style Starter Pulley
Starter pulley rope spool. 501 52 07-01 In good used shape Fits: 162, 162SE, 162SG, 162 SE SG, 266SE, 266SG, 266 SE SG, 61 Rancher, 61 Practica, 61 Older models early small metal shaft starter
Husqvarna 394xp Chainsaw Piston and Cylinder set
56mm bore OEM Mahle cylinder with piston, piston rings, and wrist pin. Husqvarna part number: 503 46 00-71 In good used shape, wear on muffler mounting surface but not cracked or broken. Fits Husqvarna 394 XP
(1 in stock)

Husqvarna 576xp Chainsaw Piston and Cylinder set 51mm
Top end motor kit includes: cylinder, piston, rings, wrist pin, clips and small end rod bearing. 537 20 71-01 In good used shape Fits Husqvarna 576 XP

husqvarna 262 chainsaw throttle trigger and safety catch set pn 503 52 73-01
Part: throttle trigger and safety lever catch Part # 503 52 73 01 Condition: good used ,usable Fits: Husqvarna 262

husqvarna 394 chainsaw crankcase half (left, flywheel side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp

husqvarna 394 chainsaw walbro wj 39 carburetor
Part: walbro WJ39 carburetor. 503 28 12-19 Condition: good used physical shape. May need a carb rebuild kit Fits: Husqvarna 394, 394xp

Husqvarna 55 Chainsaw Clutch Cover only 503 49 32-01 NEW (Misc 1E)
Clutch cover 503 49 32-01 New AFTERMARKET part Fits Husqvarna 51, 55, 55 Rancher

Husqvarna 365 Chainsaw Mahle Cylinder Only (1 broken cooling fin)
48mm OEM Mahle Cylinder A size In good used shape, smooth cylinder bore, just one broken cooling fin. Fits Husqvarna 365, 365sp. Jonsered 2065, 2165 turbo
husqvarna 372xpg 371xpg trigger handle heating element
trigger handle heating element part number 503 70 59-01 good USED working condition Fits Husqvarna 365 371 372 XPG, 371XPG, 372XPG

Husqvarna 266 Tube Type Chainsaw Muffler
Muffler with exhaust tube 501 65 76-01 In good used shape Fits Husqvarna 266 SE SG

husqvarna 42, 242, 246 chainsaw air filter (felt)
Part: nylon air filter assembly Part # 503 15 19-05 Condition: good used/working order Fits: Husqvarna 42, 242, 246
(1 in stock)

husqvarna 262xp chainsaw starter spring shield
Part: starter rewind spring holder / washer shield Part # 503 54 45 01 Condition: in good used shape Fits : Husqvarna 254, 257, 261, 262 xp se sg

husqvarna 340, 345, 350, 351, 346 chainsaw brake band
Part: brake band Part # 537 04 30-01 Condition: good used/working shape Fits: Husqvarna 340, 345, 350, 351, 346, 455
Husqvarna 380cd Chainsaw Top Cover
Top cover assembly with screws 501 27 38-04 In good used shape Fits 380 cd

Husqvarna 2100cd Chainsaw Cylinder Gasket 501 29 53-03 NEW (P-795)
Cylinder head gasket 501 29 53-01, 501 29 53-03, 501295301, 501295303 NEW from old dealer stock Fits Husqvarna 2100 285 1100 2101 cd xp 2100xp 2100cd 2101xp etc

Husqvarna 2100cd Chainsaw Clutch Sprocket Drum and Rim
Oregon Power Mate Rim Clutch Sprocket System. Replaces Husqvarna part number 503 62 59-03. Includes Drum, sprocket, and bearing. 3/8" pitch 8 tooth in good used shape Fits Husqvarna 181, 281, 288, 285, 298, 394, 1100, 2100, 2101, 1100 XP CD and others

Husqvarna 2100cd Chainsaw Air Filter Mount
Air filter mount intake with bolts. 204 51 60-52, 501 28 54-01, 501 57 33-01, 202 43 45-55 In good used shape Fits Husqvarna 2100 cd

Husqvarna 372 X-Torq Chainsaw Intake Boot Clamp
Intake manifold boot clamp 505 28 33-07 In good used shape Fits Husqvarna 372xp 365 X-Torq
(1 in stock)

Husqvarna 385xp Chainsaw Tank Guard
Tank chain guard 537 00 88-01 In good used shape Fits Husqvarna 385 xp

Husqvarna 262xp Chainsaw Top Cover Air Baffle
Top cover winter/summer air baffle plug insert 503 52 61-01 In good used shape Fits Husqvarna 261 262 xp

Husqvarna 268 Chainsaw Carburetor 503 28 03-13 New (Misc 1D)
Tillotson HS 254 b hs254b hs254 b a carb assembly 503 28 03-13 NEW Fits Husqvarna 61 Late Model, 268, 272xp, 272 xp

Husqvarna 350 Chainsaw Clutch Mechanism 537 11 05-01 NEW (Misc 1D)
Clutch mechanism with shoes, springs, and carrier. 537 11 05-01 New AFTERMARKET part Fits Husqvarna: 340, 345, 350, 351, 353, 346xp, 346 xp xpg. Jonsered: 2141, 2145, 2149, 2150, 2152, 2153 Turbo

Husqvarna 350 Crankshaft Bearings and Seals
Crank shaft bearings with seal cover assemblies. 503 93 23-02 In good used shape Fits Husqvarna 340 350 345. Jonsered 2041 2045 2050 Turbo

husqvarna 365 chainsaw low air filter cover
Low STD style air filter cover 503 62 80-01 In good usable condition Fits Husqvarna 362, 365, 371
(1 in stock)

Husqvarna 50 Rancher Muffler
Husqvarna 50 old style muffler 501 76 66-01 In good used shape Fits Husqvarna 50 and others

Husqvarna 268 Chainsaw Carb HS234b
Tillotson HS234 B carburetor In good physical condition. May or may not need fresh gasket and diaphram Fits Husqvarna 268

Husqvarna 350 Chainsaw Starter Pawl Spring 503 78 32-01 NEW (A588)
Flywheel starter pawl return spring. Part number 503 78 32 01, 529 27 11-01 NEW Fits Husqvarna 340 345 350 351 353 346xp

Husqvarna 272XP Chainsaw Top Handle 501 53 45-03 NEW
Half wrap top handle. Husqvarna part number 501 53 45 03 New AFTERMARKET part Fits Husqvarna 61 266, 266xp, 66, 268, 272 xp sg se

Husqvarna 51 Chainsaw Piston and Cylinder Assembly 503 16 83-01 NEW
45mm bore piston and cylinder top end motor kit. Includes: cylinder, piston with rings, wrist pin, and keepers New AFTERMARKET part Fits Husqvarna 51
(1 in stock)

Husqvarna 385xp Chainsaw Muffler 585 44 83 01 NEW (A588)
Muffler 585 44 83 01 544 02 91 03 New OEM part Fits Husqvarna 385xp, 390 385 xp, 390xp

Husqvarna 44 Rancher Chainsaw phelon Ignition Coil used
one piece phelon electronic ignition coil kit. Husqvarna part number: 501 67 91 60 Tested, in good used shape Fits Husqvarna 44 Practica Rancher, 444 SE, and others
husqvarna 385 xp chainsaw intake manifold boot brace support
Part: intake manifold boot brace support Condition: good used/working shape Fits: husqvarna 385xp

Husqvarna 372xp xtorq Chainsaw Cylinder bore
cylinder / bore. Part of 575 25 57-02 In good used shape Fits Husqvarna 372 365 x-torq , and jonsered cs 2172, cs2172 2166 cs2166chainsaws

Husqvarna 61 Chainsaw Piston Assembly 48mm 503 51 74-01 (Box R)
48mm Bore Piston assembly: with wrist pin, ring, and keepers. 503517401 New aftermarket part Fits Husqvarna 61 series

husqvarna practica 40 chainsaw top cover shroud
Part: top cover / engine shroud Condition: good used/working order. Fits: Husqvarna 40 44 140 and others

husqvarna 357, 359xp, 346xp, 353 chainsaw buckle clip Grey
Part: Grey buckle clip used after 2008. PN 503 89 47-01 Condition: good used/working shape Fits: Husqvarna 357, 359 xp, 346 xp, 353, 450, 445

Husqvarna 288 Chainsaw Piston and Cylinder 54mm Gilardoni
54mm bore OEM, non-deco, piston and cylinder set complete. Includes cylinder, piston, ring and wrist pin. Husqvarna part number: 503 90 74-71 In good used shape, makes good compression. Fits Husqvarna 181, 281, 288 xp lite etc. without a compression release

husqvarna 480cd chainsaw flywheel assembly (old style, sem)
Part: flywheel magneto with starter pawls, springs, studs. 501 54 26-01 Condition: good used/working order with no broken fins Fits: older style Husqvarna 480 380 CD 380cd 480cd models with SEM systems
(2 in stock)

husqvarna practica 40, rancher 40, 44, 140, 240, 340, 444 herr 3/8-7 spur sprocket drum new pn n303-a7
Part: 3/8" pitch x 7t spur sprocket drum and bearing for the clutch Herr Part # n303 a7 Condition: new Fits: some models of Husqvarna practica 40, rancher 40, 44, 140, 240, 340, 444
(3 in stock)

husqvarna 257, 261, 262 chainsaw herr 3/8-7 spur sprocket drum new pn n267-a7
Part: 3/8" pitch x 7T spur sprocket drum and bearing for the clutch Herr Part # n267 A7 Condition: new Fits: some models of Husqvarna 257 (after serial no. 314.0001) 261, 262 (after serial no. 345.0001)
(1 in stock)

Husqvarna 240 s Chainsaw Complete Points, Condenser, Coil Ignition
Complete ignition kit. Includes the coil, points, condenser, wiring and hardware. Husqvarna part numbers: 501 49 56-01, 501 49 53-01 and others. Tested, in good working order. Fits Husqvarna 240s
(2 in stock)

Husqvarna 272 61 Chainsaw Starter Pulley 503 10 24-05 NEW (1QA)
Starter recoil pulley. Rope Rotor spool. Part number 503 10 24 05 NEW aftermarket part Fits Husqvarna 272, 268, and 61 Late

Husqvarna 365 Chainsaw old style intake boot 503 41 39-01 (box ZZ)
Old style bolt on intake manifold boot. Husqvarna part number 503 74 39-01 New aftermarket part Fits OLD Husqvarna 365, and Jonsered 2065 Turbo

husqvarna 480cd chainsaw crankshaft and rod
Part: crank shaft with connecting rod. 501 55 61-01. Replaces 501 22 62-02, 501 55 61-02 Condition: good used/working order. May vary cosmetically. Fits: Husqvarna 480 cd, 380cd, 380 cd, 280cd, 280 cd, 180s 180cd 180 s cd, 65l, 77l, 65 77 l, 165r
(1 in stock)

husqvarna 154, 254 chainsaw carburetor bolt set
Part: set of carb bolts / screws Part # 501 87 17-01 Condition: good used/working order Fits: Husqvarna 154, 254

Husqvarna 154 Chainsaw Crankshaft
Crank and rod: 501 87 69-01, 506 18 23-71, 501 87 69-02 In good used shape Fits Husqvarna 154, 254 254se 254xp se sg xp

husqvarna 285, 480, 2100 chainsaw throttle trigger, safety interlock lever and springs
Part: throttle trigger with safety lever, springs and pins Part #s 501 56 58-01, 501 56 78-01, 501 61 47-01, 720 12 88-50 Condition: good used/working order Fits: Husqvarna 480, 285, 2100

Husqvarna 262 XP chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 262, 262xp, and 261

husqvarna 261, 262 chainsaw av spring mount absorber
Part: av spring mount for the tank Part# 503 54 07-01 Condition: good used/working order Fits: Husqvarna 261, 262