431366 Left flywheel side crank case half In good used shape Fits Pioneer P-50 and others
Crankcase with crankshaft, bearings, and seals 50192025R. In excellent used shape Fits Efco MT 7200 and others
Part: right clutch side of the crank case housing with bar stud / bolt set Condition: good used/working order Fits: Husqvarna 576 xp only
Part: shield / deflector and screws for the crankcase Part # 503 54 37-01, 724 33 25-56 Condition: good used/working order Fits: Husqvarna 254, 257, 262
Husqvarna 350 crankcase tank chassis good used working condition fits husqvarna 350 crank PN# 503 85 80-71 Bearing cup PN# 503 88 59-01 Crankcase PN# 537 17 20-03
Part: crank case housing half, bare bones Condition: good used/working order Fits: stihl 066 early
Part: crank case chassis housing tank with crankshaft and connecting rod Condition: good used/working shape Fits: Makita DCS520. May also fit other models
Part: crank case tank chassis housing with crankshaft and connecting rod Condition: good used/working shape Fits:Solo 651
Part: crank case chassis housing, left flywheel side. Bare bones, does not include bearing etc. Condition: good used/working shape Fits: Jonsered 920
Part: crank shaft and connecting rod with 12mm wrist pin, crankcase chassis housing Condition: good used/working shape, needs a couple helicoils Fits:some models of Stihl 044 av
Part: right side crank case chassis housing with bar bolt / stud set Condition: good used/working shape Fits: Jonsered 920
Part: right, clutch side of the crank case housing with bar stud / bolt set Condition: good used/working shape. Has some minor oxidation/pitting. Fits: Jonsered 2083 II Turbo
Part: left, flywheel side of the crank case Condition: good used/working shape. Has some minor oxidation Fits: stihl 041
Part: crank case tank chassis with crank shaft and connecting rod Condition: good used/working shape Fits: stihl 042, 048
Part: crank case housing half, left flywheel side Condition: good used/working shape Fits: husqvarna 281 288 288xp
Part: crank case (right, clutch side) with bar stud/bolt set Condition: Bearing is NOT good. Case and bar studs are in good used/working shape Fits: Husqvarna 266 se
Part: crank case engine housing tank with bar stud/bolt set, fuel filter and line. Condition: good used/working shape Fits: Jonsered 2045 Turbo
Part: right (clutch side) crank case half with bar stud/bolt set. Condition: good used/working shape Fits: Pioneer Farmsaw II, P41 P-41, P38 P-38, P39 P-39, and others
Part: crank case half, right clutch side Condition: good used/working shape Fits: Husqvarna 268 268xp 272xp 272 xp.
Part: air duct/ injection tube / shield, part # 537 20 92 01 Condition: good used/working shape Fits: husqvarna 570 576, 575xp, 576xp
Part: crank case cover, sprocket side Condition: good used/working shape Fits: Remington Super 754
Part: Crank case half flywheel side Condition: Good Used/ Working Condition Fits: Husqvarna 181
Part: crank case / oil tank half. Part # 1119 021 0701 Condition: good used/working shape. Metal has some pitting/oxidation Fits: Stihl 038 av
Part: crankcase housing fuel / oil tank with bar studs. Condition: good used/working shape Fits: Poulan Pro 255
Part: crank case half (clutch side) Condition: good used/working shape Fits: Echo CS-351vl
Part: crank case, crank shaft with the key, connecting rod and bar bolts Condition: good used/working shape Fits: Jonsered 670 625 models which have regular woodruff key type flywheel and 1 piece ignition coil systems.
Part: crank case, engine pan. Part # 503 88 59-01 Condition: good used/working shape Fits: Jonsered 2150 Turbo
Part: Crankcase bottom Condition: Good used/working shape Fits: Jonsered 520 sp
Part: crank case with crankshaft, rod Condition: good used/working shape with no breaks Fits: Late model Jonsered 670 chainsaws which have cast key flywheels
Part: crank case bottom Condition: good used/working shape Fits: McCulloch Mac 110
Part: crank case engine tank housing chassis Condition: good used/working shape with no leaks Fits: Jonsered 455
Part: crankcase pan/bottom Condition: good used/working shape Fits: McCulloch Mini Mac
Part: Crank case cover Condition: Good used/working shape Fits: McCulloch 250 Super, 250 and others
Part: crankcase Condition: good used/working shape with no breaks Fits: Homelite XL
Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266
Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se
Crank case. Right side. 1125-020-2962 11250202962 In good used shape Fits some models of 034av 036av 036 034 av super
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has some corrosion - see photos fits husqvarna 359, 357xp
Part: crankcase seal / spacer part number: 5018049 Condition: new old stock from closed out dealer. Fits: husqvarna 266 266se and some other models
Part: crank case housing half, right, clutch cover with set of bar studs / bolts Condition: good used/working shape. Has some dings/scratches and a small crack. Fits: husqvarna 372 365 371 xp 372xp 371xp 365sp
Part: crank case housing half, bare bones Condition: good used/working order. a little dinged up. Fits: stihl 066 early
Crankcase assembly bare bones. 1133 021 0160 A In good used shape Fits Stihl MS270, MS280, MS 270 280
Part: crank case half, flywheel side 1138 021 0760 Condition: good used/working shape. Some dings and chips. Fits: stihl ms441 ms 441 Magnum
Clutch PTO right side crank case half only. 1128 020 2951 In good used shape. Has some marks from the chain but still good and functional Fits Stihl MS 440
Part: clutch PTO side crank case housing half with bar stud set 1141-021-0860 Condition: good used/working order. Has a small break at the bottom. See photos. Fits: Stihl MS 261 MS-261
Crankcase case assembly 097000213a 097000213 a NEW from old dealer stock Fits Efco Olympic Olympik Olympyk Oleo-Mac 970 980 981
Crankcase a-93957 a93957 (with roller bearing, seal and worm gear) Condition: good used working order. Fits Homelite 650, 750
Shortblock motor assembly with piston, cylinder, crankshaft and crankcase complete. 50072051, 50082012 NEW take off from brand new disassembled saw Fits Efco 147 152
Flywheel left side crankcase, case half. One side of 1122 020 2113 In good used shape Fits Stihl MS660 and late model 066 Magnum
Crankshaft crank with rod 181 120 100, 181120100 In good used shape Fits Dolmar PS 460 510 5105 5100 5100s 5100sh ps5100s 5105h PS5105 PS510 without the EZ start mechanism, earlier models (note the keyway position at approx. 12 o-clock from TDC.
Clutch PTO side case half. 181 111 142, 181111142 In good used shape Fits Dolmar PS 460 510 5100 5100s 5100sh 5105 5105h PS5105 PS510
Crank case Part # A 12251 D / A12251D New old stock part from closed out dealer Fits Homelite 360 auto chainsaw models
PTO Clutch side case half In good used shape. May not include clip Fits Jonsered 2159 2152 2153 Turbo
Part: right clutch side crank case half Fits: Echo CS 750evl / 750 702 602 evl 702vl 602vl Condition: good used/working shape.
Crankcase assembly includes: left and right side crank case half, crankshaft, and bearings. In good used shape Fits Jonsered 52 52e 52 e
Drivecase with bearing New old stock part Fits Lombard Comango, lightning, AP-42, AL-42 and many other models. Match to your existing part to be sure.
Left hand flywheel side crankcase half. One side of 1124 020 2105 In good used shape Fits Stihl 084AV
Complete crank case includes: crankshaft and rod assembly, crankshaft bearings, seals, left flywheel side case, and right clutch side case. In good used shape Fits Stihl MS260 MS 260 Pro
Crankcase with both case halves, crankshaft, bearings, seals and all. 504 44 31-01 In good used shape Fits Jonsereds 621
Crankcase assembly with both case halves, crankshaft and bearing. In usable, used shape Fits Jonsered 2163 2063 Turbo
Flywheel, left side crankcase half. 1119 021 0701 In good used shape Fits Stihl 038 Magnum, MS380 only. Will not work on older regular models of 038.
Crankcase, left flywheel, and right clutch PTO sides. In usable condition, heavily worn and chipped on the bottom. Fits older serial number models of 066 with the smaller oil tank, 066AV, 066 AV Magnum Redlight.
Part: matched crankcase set with left and right, flywheel and clutch sides 1128 021 0760. Screw type filler cap. Condition: good used/working shape Fits: Stihl 044 AV Magnum
Crank case. Left side. Half of 1125 020 2107 In good used shape Fits Older 034av 036av 036 034 av super
Crank case with crankshaft, rod, bearings and all. 503 62 68-10 In good used shape Fits Jonsered 2166 2172 Turbo CS2166 CS2172
Crank case with crankshaft, rod and bearings. 501 60 12-02 In good used shape Fits Husqvarna 2100CD, 2100 CD and others
Flywheel side case half. Left side of 1125 020 2120. In good used shape Fits Stihl MS 360
Crankcase with seals and bearings. 530014137, 530-014719, 530014719 NEW Fits Poulan 2800 2700 3000 3300. Craftsman 2.8, 3.0, 3.1
Part: crank case housing half, bare bones Condition: good used/working order Has minor Cosmetic chips near mount locations as pictured Fits: stihl 066 Late Model
Flywheel starter side crank case half only. Half of 1128 020 2122 In good used shape. Fits Stihl MS 440 Magnum
Flywheel side crankcase half. In good used shape Fits 2186 Turbo
112 111 510, 112111510 Flywheel magneto left side crank case crankcase half In good used shape (small pin hole broke out in the area around the flywheel fan) but in excellent used shape. Fits Dolmar 113 and 116
Flywheel side crankcase half 430925 In good used shape Fits Pioneer Partner P-42 P41 P-41 P38 P39 P-38 P-39 and others
Clutch side case half casing 1115 020 2902 In good used shape Fits Stihl 045av 056 AV 045 AV Super etc with the newer style oil pump (see picture where oil pump bolts on)
Crankcase assembly 1133 020 2100 In good used shape Fits Stihl MS270, MS280, MS 270 280
Crank case. Left and right sides. Clutch and Flywheel sides. 1125 020 2107 In good used shape Fits Older 034av 036av 036 034 av super
Flywheel side crankcase half. In good used shape Fits Husqvarna 385 xp
NEW OEM from old dealer stock - Crank case assembly - Fits Stihl 041 AV
NEW OEM from old dealer stock - Crankcase - Fits Some old Rigid mounted Stihl 041 Farmboss, and 040
Crankshaft, crank and rod with bearings. Partner part number 300740 In good used shape. Fits 85cc Partner Models P85 R35 R435 and others
PTO clutch side crankcase half. Partner part number 505 340805 partial In good used shape Fits 85cc Partner Models P85 R35 R435 and others
Part: crank case half, magneto side Part # 118111201 Condition: new, old stock Fits: Dolmar 118
Crankcase assembly. Includes both case halves, crank, rod, and rod bearings. Stihl part numbers: 1120 021 0810, 1120 021 0710, 1120 031 0501 and others In good used shape Fits Stihl 009, 009L, 009 L with the 4 bolt cylinder head
Drivecase with bar studs and chain tensioner In good used shape, bearing and seal may or may not still be usable Fits Lombard Comango, lightning, AP-42, AL-42 and many other models. Match to your existing part to be sure.
Part: crankcase gasket Part # 100 242-1433 0 Condition: new, old stock Fits: Echo CS 650 evl
Part: crank case chassis housing, left flywheel side. Bare bones, does not include bearing etc. Condition: good used/working shape Fits: Jonsered 910, 910e, 910ev
Part: crank case engine housing with crankshaft, rod and oil cap Part # 024 111 621, 024 111 611, 024 120 022, 010 114 050 Condition: good used/working order Fits: Makita DCS9000
Part: left (flywheel) crank case tank housing half, with oil cap Condition: good used/working order Fits: Husqvarna 154se
Crankcase half. Left, flywheel side. One side of 501 56 92-04 In good used shape Fits Husqvarna 2100cd and others
Part: crank case engine tank housing with bar stud / bolt set Condition: good used/working order Fits: Jonsered cs 2245
Part: crank case tank housing Part# 65930 Condition: good used/working order Fits: Remington PL 55
Part: crank case tank chassis Condition: good used/working shape Fits: came off a Husqvarna 345 model, will also fit 340 and 350
Part: crank case chassis housing tank with bar stud set and oil cap Condition: good used/working shape Fits: Husqvarna 137
Part: engine cover, crank case tank chassis housing with bar stud set P021003100, P 021003100 Condition: good used/working shape Fits: Echo CS 4400 440 CS440 CS4400
Part: right clutch side of the crank case with the bar stud Part # 1120 021 0810 Condition: good used/working shape Fits: stihl 011 avt
Part: crank case engine housing Condition: good used/working shape Fits: Stihl 017
Part: crank case and cylinder with deflector, guide bar bolts. Part # a-70055-b Condition: one of the fins has a break as pictured. In working/usable condition Fits: Homelite 450
Part: crank case housing half, left side 501 62 07-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
Part: crank case engine housing chassis with the crank shaft and connecting rod Part # 503 11 21-01, 503 34 13-42 Condition: good used/working shape Fits: Partner 5000, 500, 540